2,188 research outputs found
Simple Random Sampling-Based Probe Station Selection for Fault Detection in Wireless Sensor Networks
Fault detection for wireless sensor networks (WSNs) has been studied intensively in recent years. Most existing works statically choose the manager nodes as probe stations and probe the network at a fixed frequency. This straightforward solution leads however to several deficiencies. Firstly, by only assigning the fault detection task to the manager node the whole network is out of balance, and this quickly overloads the already heavily burdened manager node, which in turn ultimately shortens the lifetime of the whole network. Secondly, probing with a fixed frequency often generates too much useless network traffic, which results in a waste of the limited network energy. Thirdly, the traditional algorithm for choosing a probing node is too complicated to be used in energy-critical wireless sensor networks. In this paper, we study the distribution characters of the fault nodes in wireless sensor networks, validate the Pareto principle that a small number of clusters contain most of the faults. We then present a Simple Random Sampling-based algorithm to dynamic choose sensor nodes as probe stations. A dynamic adjusting rule for probing frequency is also proposed to reduce the number of useless probing packets. The simulation experiments demonstrate that the algorithm and adjusting rule we present can effectively prolong the lifetime of a wireless sensor network without decreasing the fault detected rate
Time domain analysis of switching transient fields in high voltage substations
Switching operations of circuit breakers and disconnect switches generate transient currents propagating along the substation busbars. At the moment of switching, the busbars temporarily acts as antennae radiating transient electromagnetic fields within the substations. The radiated fields may interfere and disrupt normal operations of electronic equipment used within the substation for measurement, control and communication purposes. Hence there is the need to fully characterise the substation electromagnetic environment as early as the design stage of substation planning and operation to ensure safe operations of the electronic equipment. This paper deals with the computation of transient electromagnetic fields due to switching within a high voltage air-insulated substation (AIS) using the finite difference time domain (FDTD) metho
Emerging Communications for Wireless Sensor Networks
Wireless sensor networks are deployed in a rapidly increasing number of arenas, with uses ranging from healthcare monitoring to industrial and environmental safety, as well as new ubiquitous computing devices that are becoming ever more pervasive in our interconnected society. This book presents a range of exciting developments in software communication technologies including some novel applications, such as in high altitude systems, ground heat exchangers and body sensor networks. Authors from leading institutions on four continents present their latest findings in the spirit of exchanging information and stimulating discussion in the WSN community worldwide
Energy efficient data collection and dissemination protocols in self-organised wireless sensor networks
Wireless sensor networks (WSNs) are used for event detection and data collection in
a plethora of environmental monitoring applications. However a critical factor limits
the extension of WSNs into new application areas: energy constraints. This thesis
develops self-organising energy efficient data collection and dissemination protocols in
order to support WSNs in event detection and data collection and thus extend the use
of sensor-based networks to many new application areas.
Firstly, a Dual Prediction and Probabilistic Scheduler (DPPS) is developed. DPPS
uses a Dual Prediction Scheme combining compression and load balancing techniques
in order to manage sensor usage more efficiently. DPPS was tested and evaluated
through computer simulations and empirical experiments. Results showed that DPPS
reduces energy consumption in WSNs by up to 35% while simultaneously maintaining
data quality and satisfying a user specified accuracy constraint.
Secondly, an Adaptive Detection-driven Ad hoc Medium Access Control (ADAMAC)
protocol is developed. ADAMAC limits the Data Forwarding Interruption problem
which causes increased end-to-end delay and energy consumption in multi-hop sensor
networks. ADAMAC uses early warning alarms to dynamically adapt the sensing
intervals and communication periods of a sensor according to the likelihood of any
new events occurring. Results demonstrated that compared to previous protocols such
as SMAC, ADAMAC dramatically reduces end-to-end delay while still limiting energy
consumption during data collection and dissemination. The protocols developed in this thesis, DPPS and ADAMAC, effectively alleviate
the energy constraints associated with WSNs and will support the extension of sensorbased
networks to many more application areas than had hitherto been readily possible
FAULT DETECTION AND DATA PREDICTION FOR WIRELESS SENSOR NETWORKS
In the last few years, Wireless Sensor Networks (WSNs) have been extensively used as a pervasive sensing module of Ambient Intelligence (AmI) systems in several application fields, thanks to their versatility and ability to monitor diverse
environmental quantities. Although wireless sensor nodes are able to perform onboard
computations and to share the sensed data, they are limited by the scarcity of energy resources which heavily influences the network lifetime; moreover, the design phase of a WSN requires testing the application scalability prior to actual deployment. In this regard, this dissertation focuses on data prediction to address such crucial tasks as prolonging the network lifetime and testing the WSN scalability. Nevertheless, the matter is particularly challenging as the real world measurements are influenced by unpredictable events that affect the sensor readings. To this aim, fault detection techniques help to identify corrupt measurements and to discard them before they are actually transmitted within the network, so they may be profitably used to improve the precision of the prediction models.
This dissertation describes the design of two software modules which address fault detection and data prediction and may be combined in a single software system for WSNs. The fault detection submodule classifies the sensed measurements as “corrupt” or “regular” by means of Bayesian Inference. The prediction submodule builds models for the monitored quantities and is also able to generalize them to unknown environments populated by virtual sensor nodes so it allows to test the scalability of the application for networks of different sizes. Prediction also allows sensor nodes to reduce their energy consumption as much as possible by fine tuning their sampling rate based on the accuracy of the predictors.
Experimental results show the capabilities of the proposed system to detect faults and to build reliable prediction models for some of the most common physical quantities for WSNs, namely light exposure, temperature and humidity
- …