Hybrid Caching for Chip Multiprocessors Using Compiler-Based Data Classification

The high performance delivered by modern computer system keeps scaling with an increasingnumber of processors connected using distributed network on-chip. As a result, memory accesslatency, largely dominated by remote data cache access and inter-processor communication, is becoming a critical performance bottleneck. To release this problem, it is necessary to localize data access as much as possible while keep efficient on-chip cache memory utilization. Achieving this however, is application dependent and needs a keen insight into the memory access characteristics of the applications. This thesis demonstrates how using fairly simple thus inexpensive compiler analysis memory accesses can be classified into private data access and shared data access. In addition, we introduce a third classification named probably private access and demonstrate the impact of this category compared to traditional private and shared memory classification. The memory access classification information from the compiler analysis is then provided to the runtime system through a modified memory allocator and page table to facilitate a hybrid private-shared caching technique. The hybrid cache mechanism is aware of different data access classification and adopts appropriate placement and search policies accordingly to improve performance. Our analysis demonstrates that many applications have a significant amount of both private and shared data and that compiler analysis can identify the private data effectively for many applications. Experimentsresults show that the implemented hybrid caching scheme achieves 4.03% performance improvement over state of the art NUCA-base caching

The locality-aware adaptive cache coherence protocol

Next generation multicore applications will process massive amounts of data with significant sharing. Data movement and management impacts memory access latency and consumes power. Therefore, harnessing data locality is of fundamental importance in future processors. We propose a scalable, efficient shared memory cache coherence protocol that enables seamless adaptation between private and logically shared caching of on-chip data at the fine granularity of cache lines. Our data-centric approach relies on in-hardware yet low-overhead runtime profiling of the locality of each cache line and only allows private caching for data blocks with high spatio-temporal locality. This allows us to better exploit the private caches and enable low-latency, low-energy memory access, while retaining the convenience of shared memory. On a set of parallel benchmarks, our low-overhead locality-aware mechanisms reduce the overall energy by 25% and completion time by 15% in an NoC-based multicore with the Reactive-NUCA on-chip cache organization and the ACKwise limited directory-based coherence protocol.United States. Defense Advanced Research Projects Agency. The Ubiquitous High Performance Computing Progra

Proximity coherence for chip-multiprocessors

Many-core architectures provide an efficient way of harnessing the growing numbers of transistors available in modern fabrication processes; however, the parallel programs run on these platforms are increasingly limited by the energy and latency costs of communication. Existing designs provide a functional communication layer but do not necessarily implement the most efficient solution for chip-multiprocessors, placing limits on the performance of these complex systems. In an era of increasingly power limited silicon design, efficiency is now a primary concern that motivates designers to look again at the challenge of cache coherence. The first step in the design process is to analyse the communication behaviour of parallel benchmark suites such as Parsec and SPLASH-2. This thesis presents work detailing the sharing patterns observed when running the full benchmarks on a simulated 32-core x86 machine. The results reveal considerable locality of shared data accesses between threads with consecutive operating system assigned thread IDs. This pattern, although of little consequence in a multi-node system, corresponds to strong physical locality of shared data between adjacent cores on a chip-multiprocessor platform. Traditional cache coherence protocols, although often used in chip-multiprocessor designs, have been developed in the context of older multi-node systems. By redesigning coherence protocols to exploit new patterns such as the physical locality of shared data, improving the efficiency of communication, specifically in chip-multiprocessors, is possible. This thesis explores such a design – Proximity Coherence – a novel scheme in which L1 load misses are optimistically forwarded to nearby caches via new dedicated links rather than always being indirected via a directory structure.EPSRC DTA research scholarshi

Hardware-Oriented Cache Management for Large-Scale Chip Multiprocessors

One of the key requirements to obtaining high performance from chip multiprocessors (CMPs) is to effectively manage the limited on-chip cache resources shared among co-scheduled threads/processes. This thesis proposes new hardware-oriented solutions for distributed CMP caches. Computer architects are faced with growing challenges when designing cache systems for CMPs. These challenges result from non-uniform access latencies, interference misses, the bandwidth wall problem, and diverse workload characteristics. Our exploration of the CMP cache management problem suggests a CMP caching framework (CC-FR) that defines three main approaches to solve the problem: (1) data placement, (2) data retention, and (3) data relocation. We effectively implement CC-FR's components by proposing and evaluating multiple cache management mechanisms.Pressure and Distance Aware Placement (PDA) decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Flexible Set Balancing (FSB), on the other hand, reduces interference misses via extending the life time of cache lines through retaining some fraction of the working set at underutilized local sets to satisfy far-flung reuses. PDA implements CC-FR's data placement and relocation components and FSB applies CC-FR's retention approach.To alleviate non-uniform access latencies and adapt to phase changes in programs, Adaptive Controlled Migration (ACM) dynamically and periodically promotes cache blocks towards L2 banks close to requesting cores. ACM lies under CC-FR's data relocation category. Dynamic Cache Clustering (DCC), on the other hand, addresses diverse workload characteristics and growing non-uniform access latencies challenges via constructing a cache cluster for each core and expands/contracts all clusters synergistically to match each core's cache demand. DCC implements CC-FR's data placement and relocation approaches. Lastly, Dynamic Pressure and Distance Aware Placement (DPDA) combines PDA and ACM to cooperatively mitigate interference misses and non-uniform access latencies. Dynamic Cache Clustering and Balancing (DCCB), on the other hand, combines DCC and FSB to employ all CC-FR's categories and achieve higher system performance. Simulation results demonstrate the effectiveness of the proposed mechanisms and show that they compare favorably with related cache designs

Latency reduction techniques in chip multiprocessor cache systems

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2006.Includes bibliographical references (p. 117-122).Single-chip multiprocessors (CMPs) solve several bottlenecks facing chip designers today. Compared to traditional superscalars, CMPs deliver higher performance at lower power for thread-parallel workloads. In this thesis, we consider tiled CMPs, a class of CMPs where each tile contains a slice of the total on-chip L2 cache storage, and tiles are connected by an on-chip network. Two basic schemes are currently used to manage L2 slices. First, each slice can be used as a private L2 for the tile. Private L2 caches provide the lowest hit latency but reduce the total effective cache capacity because each tile creates a local copy of any block it touches. Second, all slices are aggregated to form a single large L2 shared by all tiles. A shared L2 cache increases the effective cache capacity for shared data, but incurs longer hit latencies when L2 data is on a remote tile. In practice, either private or shared works better for a given workload. We present two new policies, victim replication and victim migration, both of which combine the advantages of private and shared designs. They are variants of the shared scheme which attempt to keep copies of local L1 cache victims within the local L2 cache slice.(cont.) Hits to these replicated copies reduce the effective latency of the shared L2 cache, while retaining the benefits of a higher effective capacity for shared data. We evaluate the various schemes using full-system simulation of single-threaded, multi-threaded, and multi-programmed workloads running on an eight-processor tiled CMP. We show that both techniques achieve significant performance improvement over baseline private and shared schemes for these workloads.by Michael Zhang.Ph.D

Exploiting Properties of CMP Cache Traffic in Designing Hybrid Packet/Circuit Switched NoCs

Chip multiprocessors with few to tens of processing cores are already commercially available. Increased scaling of technology is making it feasible to integrate even more cores on a single chip. Providing the cores with fast access to data is vital to overall system performance. When a core requires access to a piece of data, the core's private cache memory is searched first. If a miss occurs, the data is looked up in the next level(s) of the memory hierarchy, where often one or more levels of cache are shared between two or more cores. Communication between the cores and the slices of the on-chip shared cache is carried through the network-on-chip(NoC). Interestingly, the cache and NoC mutually affect the operation of each other; communication over the NoC affects the access latency of cache data, while the cache organization generates the coherence and data messages, thus affecting the communication patterns and latency over the NoC. This thesis considers hybrid packet/circuit switched NoCs, i.e., packet switched NoCs enhanced with the ability to configure circuits. The communication and performance benefit that come from using circuits is predicated on amortizing the time cost incurred for configuring the circuits. To address this challenge, NoC designs are proposed that take advantage of properties of the cache traffic, namely temporal locality and predictability, to amortize or hide the circuit configuration time cost. First, a coarse-grained circuit configuration policy is proposed that exploits the temporal locality in the cache traffic to periodically configure circuits for the heavily communicating nodes. This allows the design of a locality-aware cache that promotes temporal communication locality through data placement, while designing suitable data replacement and migration policies. Next, a fine-grained configuration policy, called Déjà Vu switching, is proposed for leveraging predictability of data messages by initiating a circuit configuration as soon as a cache hit is detected and before the data becomes available. Its benefit is demonstrated for saving interconnect energy in multi-plane NoCs. Finally, a more proactive configuration policy is proposed for fast caches, where circuit reservations are initiated by request messages, which can greatly improve communication latency and system performance

Locality-aware data replication in the Last-Level Cache

Next generation multicores will process massive data with varying degree of locality. Harnessing on-chip data locality to optimize the utilization of cache and network resources is of fundamental importance. We propose a locality-aware selective data replication protocol for the last-level cache (LLC). Our goal is to lower memory access latency and energy by replicating only high locality cache lines in the LLC slice of the requesting core, while simultaneously keeping the off-chip miss rate low. Our approach relies on low overhead yet highly accurate in-hardware run-time classification of data locality at the cache line granularity, and only allows replication for cache lines with high reuse. Furthermore, our classifier captures the LLC pressure at the existing replica locations and adapts its replication decision accordingly. The locality tracking mechanism is decoupled from the sharer tracking structures that cause scalability concerns in traditional coherence protocols. Moreover, the complexity of our protocol is low since no additional coherence states are created. On a set of parallel benchmarks, our protocol reduces the overall energy by 16%, 14%, 13% and 21% and the completion time by 4%, 9%, 6% and 13% when compared to the previously proposed Victim Replication, Adaptive Selective Replication, Reactive-NUCA and Static-NUCA LLC management schemes

Using hybrid shared and distributed caching for mixed-coherency GPU workloads

Current GPU computing models support a mixture of coherent and incoherent classes of memory operations. Workloads using these models typically have working sets too large to fit in an economical SRAM structure. Still, GPU architectures have last-level caches to primarily fulfill two functions: eliminate redundant DRAM accesses servicing requests from different L1 caches to the same line, and maintain on-chip memory coherence for the coherent class of memory operations. In this thesis, we propose an alternative memory system design for GPU architectures better fit for their workloads. Our architectural design features a directory-like sharing tracker that allows the incoherent private L1 caches to directly satisfy remote requests for shared data. It also retains a shared L2 cache with a customized caching policy to support coherent accesses on-chip and better serve non-coalesced requests that contend aggressively for cache lines. This thesis characterizes the novel and intriguing tradeoffs between the components of our proposed memory system design for area, energy, and performance. We show that the proposed design achieves a 22% average reduction in DRAM data demand over a standard GPU architecture with 1MB L2 cache, leading to an overall 28% reduction in the memory system energy consumption on average. Conversely, our results show that the DRAM data demand of the proposed design with 256KB L2 cache is on par with a standard GPU architecture with 1MB L2 cache, albeit at a smaller area overhead and power leakage. Our results, while drawn on motivations from the GPU realm, are not architecture-specific and can be extended to other throughput-oriented many-core organizations

On the simulation and design of manycore CMPs

The progression of Moore’s Law has resulted in both embedded and performance computing systems which use an ever increasing number of processing cores integrated in a single chip. Commercial systems are now available which provide hundreds of cores, and academics have proposed architectures for up to 1024 cores. Embedded multicores are increasingly popular as it is easier to guarantee hard-realtime constraints using individual cores dedicated for tasks, than to use traditional time-multiplexed processing. However, finding the optimal hardware configuration to meet these requirements at minimum cost requires extensive trial and error approaches to investigate the design space. This thesis tackles the problems encountered in the design of these large scale multicore systems by first addressing the problem of fast, detailed micro-architectural simulation. Initially addressing embedded systems, this work exploits the lack of hardware cache-coherence support in many deeply embedded systems to increase the available parallelism in the simulation. Then, through partitioning the NoC and using packet counting and cycle skipping reduces the amount of computation required to accurately model the NoC interconnect. In combination, this enables simulation speeds significantly higher than the state of the art, while maintaining less error, when compared to real hardware, than any similar simulator. Simulation speeds reach up to 370MIPS (Million (target) Instructions Per Second), or 110MHz, which is better than typical FPGA prototypes, and approaching final ASIC production speeds. This is achieved while maintaining an error of only 2.1%, significantly lower than other similar simulators. The thesis continues by scaling the simulator past large embedded systems up to 64-1024 core processors, adding support for coherent architectures using the same packet counting techniques along with low overhead context switching to enable the simulation of such large systems with stricter synchronisation requirements. The new interconnect model was partitioned to enable parallel simulation to further improve simulation speeds in a manner which did not sacrifice any accuracy. These innovations were leveraged to investigate significant novel energy saving optimisations to the coherency protocol, processor ISA, and processor micro-architecture. By introducing a new instruction, with the name wait-on-address, the energy spent during spin-wait style synchronisation events can be significantly reduced. This functions by putting the core into a low-power idle state while the cache line of the indicated address is monitored for coherency action. Upon an update or invalidation (or traditional timer or external interrupts) the core will resume execution, but the active energy of running the core pipeline and repeatedly accessing the data and instruction caches is effectively reduced to static idle power. The thesis also shows that existing combined software-hardware schemes to track data regions which do not require coherency can adequately address the directory-associativity problem, and introduces a new coherency sharer encoding which reduces the energy consumed by sharer invalidations when sharers are grouped closely together, such as would be the case with a system running many tasks with a small degree of parallelism in each. The research concludes by using the extremely fast simulation speeds developed to produce a large set of training data, collecting various runtime and energy statistics for a wide range of embedded applications on a huge diverse range of potential MPSoC designs. This data was used to train a series of machine learning based models which were then evaluated on their capacity to predict performance characteristics of unseen workload combinations across the explored MPSoC design space, using only two sample simulations, with promising results from some of the machine learning techniques. The models were then used to produce a ranking of predicted performance across the design space, and on average Random Forest was able to predict the best design within 89% of the runtime performance of the actual best tested design, and better than 93% of the alternative design space. When predicting for a weighted metric of energy, delay and area, Random Forest on average produced results within 93% of the optimum result. In summary this thesis improves upon the state of the art for cycle accurate multicore simulation, introduces novel energy saving changes the the ISA and microarchitecture of future multicore processors, and demonstrates the viability of machine learning techniques to significantly accelerate the design space exploration required to bring a new manycore design to market