Probably Unknown: Deep Inverse Sensor Modelling In Radar

Radar presents a promising alternative to lidar and vision in autonomous vehicle applications, able to detect objects at long range under a variety of weather conditions. However, distinguishing between occupied and free space from raw radar power returns is challenging due to complex interactions between sensor noise and occlusion. To counter this we propose to learn an Inverse Sensor Model (ISM) converting a raw radar scan to a grid map of occupancy probabilities using a deep neural network. Our network is self-supervised using partial occupancy labels generated by lidar, allowing a robot to learn about world occupancy from past experience without human supervision. We evaluate our approach on five hours of data recorded in a dynamic urban environment. By accounting for the scene context of each grid cell our model is able to successfully segment the world into occupied and free space, outperforming standard CFAR filtering approaches. Additionally by incorporating heteroscedastic uncertainty into our model formulation, we are able to quantify the variance in the uncertainty throughout the sensor observation. Through this mechanism we are able to successfully identify regions of space that are likely to be occluded.Comment: 6 full pages, 1 page of reference

Frequency Modulated Continuous Waveform Radar for Collision Prevention in Large Vehicles

The drivers of large vehicles can have very limited visibility, which contributes to poor situation awareness and an increased risk of collision with other agents. This thesis is focused on the development of reliable sensing for this close proximity problem in large vehicles operating in harsh environmental conditions. It emphasises the use of in-depth knowledge of a sensor’s physics and performance characteristics to develop effective mathematical models for use in different mapping algorithms. An analysis of the close proximity problem and the demands it poses on sensing technologies is presented. This guides the design and modelling process for a frequency modulated continuous waveform (FMCW) radar sensor for use in solving the close proximity problem. Radar offers better all-weather performance than other sensing modalities, but its measurement structure is more complex and often degraded by noise and clutter. The commonly used constant false alarm rate (CFAR) threshold approach performs poorly in applications with frequent extended targets and a short measurement vector, as is the case here. Therefore, a static detection threshold is calculated using measurements of clutter made using the radar, allowing clutter measurements to be filtered out in known environments. The detection threshold is used to develop a heuristic sensor model for occupancy grid mapping. This results in a more reliable representation of the environment than is achieved using the detection threshold alone. A Gaussian mixture extended Kalman probability hypothesis density filter (GM-EK-PHD) is implemented to allow mapping in dynamic environments using the FMCW radar. These methods are used to produce maps of the environment that can be displayed to the driver of a large vehicle to better avoid collisions. The concepts developed in this thesis are validated using simulated and real data from a low-cost 24GHz FMCW radar developed at the Australian Centre for Field Robotics at the University of Sydney

Deep probabilistic methods for improved radar sensor modelling and pose estimation

Radar’s ability to sense under adverse conditions and at far-range makes it a valuable alternative to vision and lidar for mobile robotic applications. However, its complex, scene-dependent sensing process and significant noise artefacts makes working with radar challenging. Moving past classical rule-based approaches, which have dominated the literature to date, this thesis investigates deep and data-driven solutions across a range of tasks in robotics. Firstly, a deep approach is developed for mapping raw sensor measurements to a grid-map of occupancy probabilities, outperforming classical filtering approaches by a significant margin. A distribution over the occupancy state is captured, additionally allowing uncertainty in predictions to be identified and managed. The approach is trained entirely using partial labels generated automatically from lidar, without requiring manual labelling. Next, a deep model is proposed for generating stochastic radar measurements from simulated elevation maps. The model is trained by learning the forward and backward processes side-by-side, using a combination of adversarial and cyclical consistency constraints in combination with a partial alignment loss, using labels generated in lidar. By faithfully replicating the radar sensing process, new models can be trained for down-stream tasks, using labels that are readily available in simulation. In this case, segmentation models trained on simulated radar measurements, when deployed in the real world, are shown to approach the performance of a model trained entirely on real-world measurements. Finally, the potential of deep approaches applied to the radar odometry task are explored. A learnt feature space is combined with a classical correlative scan matching procedure and optimised for pose prediction, allowing the proposed method to outperform the previous state-of-the-art by a significant margin. Through a probabilistic consideration the uncertainty in the pose is also successfully characterised. Building upon this success, properties of the Fourier Transform are then utilised to separate the search for translation and angle. It is shown that this decoupled search results in a significant boost to run-time performance, allowing the approach to run in real-time on CPUs and embedded devices, whilst remaining competitive with other radar odometry methods proposed in the literature

Activities recognition and worker profiling in the intelligent office environment using a fuzzy finite state machine

Analysis of the office workers’ activities of daily working in an intelligent office environment can be used to optimize energy consumption and also office workers’ comfort. To achieve this end, it is essential to recognise office workers’ activities including short breaks, meetings and non-computer activities to allow an optimum control strategy to be implemented. In this paper, fuzzy finite state machines are used to model an office worker’s behaviour. The model will incorporate sensory data collected from the environment as the input and some pre-defined fuzzy states are used to develop the model. Experimental results are presented to illustrate the effectiveness of this approach. The activity models of different individual workers as inferred from the sensory devices can be distinguished. However, further investigation is required to create a more complete model

A Joint 3D-2D based Method for Free Space Detection on Roads

In this paper, we address the problem of road segmentation and free space detection in the context of autonomous driving. Traditional methods either use 3-dimensional (3D) cues such as point clouds obtained from LIDAR, RADAR or stereo cameras or 2-dimensional (2D) cues such as lane markings, road boundaries and object detection. Typical 3D point clouds do not have enough resolution to detect fine differences in heights such as between road and pavement. Image based 2D cues fail when encountering uneven road textures such as due to shadows, potholes, lane markings or road restoration. We propose a novel free road space detection technique combining both 2D and 3D cues. In particular, we use CNN based road segmentation from 2D images and plane/box fitting on sparse depth data obtained from SLAM as priors to formulate an energy minimization using conditional random field (CRF), for road pixels classification. While the CNN learns the road texture and is unaffected by depth boundaries, the 3D information helps in overcoming texture based classification failures. Finally, we use the obtained road segmentation with the 3D depth data from monocular SLAM to detect the free space for the navigation purposes. Our experiments on KITTI odometry dataset, Camvid dataset, as well as videos captured by us, validate the superiority of the proposed approach over the state of the art.Comment: Accepted for publication at IEEE WACV 201