Modelo cinemático de un robot móvil tipo diferencial y navegación a partir de la estimación odométrica

El presente articulo describe la implementación de estrategias de navegación de un robot móvil tipo diferencial a partir de la estimación odométrica, y su implementación utilizando Hardware reconfigurable (FPGAS). Se muestra la potencialidad de las FPGAS en la implementación de aplicaciones de robótica móvil. Se muestran los resultados de algunos experimentos realizados con la plataforma, y los errores odométricos de estos, los cuales se utilizaran para generación y corrección de trayectorias

Road edge and lane boundary detection using laser and vision

This paper presents a methodology for extracting road edge and lane information for smart and intelligent navigation of vehicles. The range information provided by a fast laser range-measuring device is processed by an extended Kalman filter to extract the road edge or curb information. The resultant road edge information is used to aid in the extraction of the lane boundary from a CCD camera image. Hough Transform (HT) is used to extract the candidate lane boundary edges, and the most probable lane boundary is determined using an Active Line Model based on minimizing an appropriate Energy function. Experimental results are presented to demonstrate the effectiveness of the combined Laser and Vision strategy for road-edge and lane boundary detection

PMITO - Plataforma móvil para investigación de técnicas de odometría

El presente trabajo describe el diseño y construcción de una plataforma móvil con anillos de sensores infrarrojos y sensores ultrasónicos como dispositivos para la medición de distancia, los cuales serán posteriormente utilizados para la navegación de robots móviles en ambientes dinámicos. Se muestra una breve reseña sobre la arquitectura de robots móviles y la importancia de determinar una estructura de control para formular alternativas de navegación y construcción de mapas de entorno con la implementación de sensores que permitan al sistema conocer la distancia que ha recorrido, su ubicación, y la distancia existente entre el entorno y el sistema mismo, utilizando sistemas embebidos, en este caso tarjetas de la serie ARDUINO

Road curb and intersection detection using A 2D LMS

In most urban roads, and similar environments such as in theme parks, campus sites, industrial estates, science parks and the like, the painted lane markings that exist may not be easily discernible by CCD cameras due to poor lighting, bad weather conditions, and inadequate maintenance. An important feature of roads in such environments is the existence of pavements or curbs on either side defining the road boundaries. These curbs, which are mostly parallel to the road, can be hardnessed to extract useful features of the road for implementing autonomous navigation or driver assistance systems. However, extraction of the curb or road edge feature using vision image data is a very formidable task as the curb is not conspicuous in the vision image. To extract the curb using vision data requires extensive image processing, heuristics and very favorable ambient lighting. In our approach, road curbs are extracted speedily using range data provided by a 2D Laser range Measurement System (LMS). Experimental results are presented to demonstrate the viability, and effectiveness, of the proposed methodology and its robustness to different road configurations including road intersections

Reactive direction control for a mobile robot: A locust-like control of escape direction emerges when a bilateral pair of model locust visual neurons are integrated

Locusts possess a bilateral pair of uniquely identifiable visual neurons that respond vigorously to the image of an approaching object. These neurons are called the lobula giant movement detectors (LGMDs). The locust LGMDs have been extensively studied and this has lead to the development of an LGMD model for use as an artificial collision detector in robotic applications. To date, robots have been equipped with only a single, central artificial LGMD sensor, and this triggers a non-directional stop or rotation when a potentially colliding object is detected. Clearly, for a robot to behave autonomously, it must react differently to stimuli approaching from different directions. In this study, we implement a bilateral pair of LGMD models in Khepera robots equipped with normal and panoramic cameras. We integrate the responses of these LGMD models using methodologies inspired by research on escape direction control in cockroaches. Using ‘randomised winner-take-all’ or ‘steering wheel’ algorithms for LGMD model integration, the khepera robots could escape an approaching threat in real time and with a similar distribution of escape directions as real locusts. We also found that by optimising these algorithms, we could use them to integrate the left and right DCMD responses of real jumping locusts offline and reproduce the actual escape directions that the locusts took in a particular trial. Our results significantly advance the development of an artificial collision detection and evasion system based on the locust LGMD by allowing it reactive control over robot behaviour. The success of this approach may also indicate some important areas to be pursued in future biological research

Laser-camera composite sensing for road detection and tracing

An important feature in most urban roads and similar environments, such as in theme parks, campus sites, industrial estates, science parks, and the like, is the existence of pavements or curbs on either side de?ning the road boundaries. These curbs, which are mostly parallel to the road, can be harnessed to extract useful features of the road for implementing autonomous navigation or driver assistance systems. However, vision-alone methods for extraction of such curbs or road edge features with accurate depth information is a formidable task, as the curb is not conspicuous in the vision image and also requires the use of stereo images. Further, bad lighting, adverse weather conditions, nonlinear lens aberrations, or lens glare due to sun and other bright light sources can severely impair the road image quality and thus the operation of vision-alone methods. In this paper an alternative and novel approach involving the fusion of 2D laser range and monochrome vision image data is proposed to improve the robustness and reliability. Experimental results are presented to demonstrate the viability and effectiveness of the proposed methodology and its robustness to different road configurations and shadows

Redundant neural vision systems: competing for collision recognition roles

Ability to detect collisions is vital for future robots that interact with humans in complex visual environments. Lobula giant movement detectors (LGMD) and directional selective neurons (DSNs) are two types of identified neurons found in the visual pathways of insects such as locusts. Recent modelling studies showed that the LGMD or grouped DSNs could each be tuned for collision recognition. In both biological and artificial vision systems, however, which one should play the collision recognition role and the way the two types of specialized visual neurons could be functioning together are not clear. In this modeling study, we compared the competence of the LGMD and the DSNs, and also investigate the cooperation of the two neural vision systems for collision recognition via artificial evolution. We implemented three types of collision recognition neural subsystems – the LGMD, the DSNs and a hybrid system which combines the LGMD and the DSNs subsystems together, in each individual agent. A switch gene determines which of the three redundant neural subsystems plays the collision recognition role. We found that, in both robotics and driving environments, the LGMD was able to build up its ability for collision recognition quickly and robustly therefore reducing the chance of other types of neural networks to play the same role. The results suggest that the LGMD neural network could be the ideal model to be realized in hardware for collision recognition

Diseño e implementación de un bloque de percepción sensorial con sensores infrarrojos, para el levantamiento de mapas de entorno en robótica móvil.

En el presente articulo se describe un bloque de percepción sensorial, utilizando sensores infrarrojos, el cual fué implementado en una FPGA’s, Spartan 3E de Xilinx

Diseño e implementación de un bloque de percepción sensorial con sensores infrarrojos, para el levantamiento de mapas de entorno en robótica móvil.

En el presente articulo se describe un bloque de percepción sensorial, utilizando sensores infrarrojos, el cual fué implementado en una FPGA’s, Spartan 3E de Xilinx