PACE: Simple Multi-hop Scheduling for Single-radio 802.11-based Stub Wireless Mesh Networks

IEEE 802.11-based Stub Wireless Mesh Networks (WMNs) are a cost-effective and flexible solution to extend wired network infrastructures. Yet, they suffer from two major problems: inefficiency and unfairness. A number of approaches have been proposed to tackle these problems, but they are too restrictive, highly complex, or require time synchronization and modifications to the IEEE 802.11 MAC. PACE is a simple multi-hop scheduling mechanism for Stub WMNs overlaid on the IEEE 802.11 MAC that jointly addresses the inefficiency and unfairness problems. It limits transmissions to a single mesh node at each time and ensures that each node has the opportunity to transmit a packet in each network-wide transmission round. Simulation results demonstrate that PACE can achieve optimal network capacity utilization and greatly outperforms state of the art CSMA/CA-based solutions as far as goodput, delay, and fairness are concerned

A Topology Control-Based Self-Organisation in Wireless Mesh Networks

An algorithm for self-organisation that assigns the channels intelligently in multi-radio wireless mesh networks (MR-WMN) is important for the proper operation of MR-WMN. The aim of the self-organisation algorithm is to reduce the overall interference and increase the aggregate capacity of the network. In this paper, we have first proposed a generic self-organisation algorithm that addresses these two challenges. The basic approach is that of a distributed, light-weight, cooperative multiagent system that guarantees scalability. Second, we have evaluated the performance of the proposed self-organisation algorithm for two sets of initialisation schemes. The initialisation process results in a topology control of MR-WMN by way of spatial distribution of connectivity between the mesh nodes. The results have been obtained for realistic scenarios of MR-WMN node densities and topologies. We have shown in addition the need to develop non-transmit power control based algorithms to achieve a further increase in system capacity

Performance Evaluation of a Self-Organising Scheme for Multi-Radio Wireless Mesh Networks

Multi-Radio Wireless Mesh Networks (MR-WMN) can substantially increase the aggregate capacity of the Wireless Mesh Networks (WMN) if the channels are assigned to the nodes in an intelligent way so that the overall interference is limited. We propose a generic self-organisation algorithm that addresses the two key challenges of scalability and stability in a WMN. The basic approach is that of a distributed, light-weight, co-operative multiagent system that guarantees scalability. The usefulness of our algorithm is exhibited by the performance evaluation results that are presented for different MR-WMN node densities and typical topologies. In addition, our work complements the Task Group 802.11s Extended Service Set (ESS) Mesh networking project work that is in progress

Validation of Two Distributed, Autonomous Self-Organisation Algorithms for 802.11 Mesh Networks by Simulation

Two algorithms in a "self-organisation of multi-radio mesh networks" project are described and validated by simulation. As they are to be deployed over large networks the two challenges have been the scalability and stability of the solution. The basic approach is that of a distributed, light-weight, cooperative multiagent system that guarantees scalability. As the solution is distributed it is unsuitable to achieve any global optimisation goal --- in any case, we argue that global optimisation of mesh network performance in any significant sense is not feasible in real situations that are subjected to unanticipated perturbations and external intervention. Our overall goal is simply to reduce maintenance costs for such networks by removing the need for humans to tune the network settings. So stability of the algorithms is our main concern

Intrusion Detection Systems for Community Wireless Mesh Networks

Wireless mesh networks are being increasingly used to provide affordable network connectivity to communities where wired deployment strategies are either not possible or are prohibitively expensive. Unfortunately, computer networks (including mesh networks) are frequently being exploited by increasingly profit-driven and insidious attackers, which can affect their utility for legitimate use. In response to this, a number of countermeasures have been developed, including intrusion detection systems that aim to detect anomalous behaviour caused by attacks. We present a set of socio-technical challenges associated with developing an intrusion detection system for a community wireless mesh network. The attack space on a mesh network is particularly large; we motivate the need for and describe the challenges of adopting an asset-driven approach to managing this space. Finally, we present an initial design of a modular architecture for intrusion detection, highlighting how it addresses the identified challenges

TechNews digests: Jan - Nov 2006

TechNews is a technology, news and analysis service aimed at anyone in the education sector keen to stay informed about technology developments, trends and issues. TechNews focuses on emerging technologies and other technology news. TechNews service : digests september 2004 till May 2010 Analysis pieces and News combined publish every 2 to 3 month

On a Joint Physical Layer and Medium Access Control Sublayer Design for Efficient Wireless Sensor Networks and Applications

Wireless sensor networks (WSNs) are distributed networks comprising small sensing devices equipped with a processor, memory, power source, and often with the capability for short range wireless communication. These networks are used in various applications, and have created interest in WSN research and commercial uses, including industrial, scientific, household, military, medical and environmental domains. These initiatives have also been stimulated by the finalisation of the IEEE 802.15.4 standard, which defines the medium access control (MAC) and physical layer (PHY) for low-rate wireless personal area networks (LR-WPAN). Future applications may require large WSNs consisting of huge numbers of inexpensive wireless sensor nodes with limited resources (energy, bandwidth), operating in harsh environmental conditions. WSNs must perform reliably despite novel resource constraints including limited bandwidth, channel errors, and nodes that have limited operating energy. Improving resource utilisation and quality-of-service (QoS), in terms of reliable connectivity and energy efficiency, are major challenges in WSNs. Hence, the development of new WSN applications with severe resource constraints will require innovative solutions to overcome the above issues as well as improving the robustness of network components, and developing sustainable and cost effective implementation models. The main purpose of this research is to investigate methods for improving the performance of WSNs to maintain reliable network connectivity, scalability and energy efficiency. The study focuses on the IEEE 802.15.4 MAC/PHY layers and the carrier sense multiple access with collision avoidance (CSMA/CA) based networks. First, transmission power control (TPC) is investigated in multi and single-hop WSNs using typical hardware platform parameters via simulation and numerical analysis. A novel approach to testing TPC at the physical layer is developed, and results show that contrary to what has been reported from previous studies, in multi-hop networks TPC does not save energy. Next, the network initialization/self-configuration phase is addressed through investigation of the 802.15.4 MAC beacon interval setting and the number of associating nodes, in terms of association delay with the coordinator. The results raise doubt whether that the association energy consumption will outweigh the benefit of duty cycle power management for larger beacon intervals as the number of associating nodes increases. The third main contribution of this thesis is a new cross layer (PHY-MAC) design to improve network energy efficiency, reliability and scalability by minimising packet collisions due to hidden nodes. This is undertaken in response to findings in this thesis on the IEEE 802.15.4 MAC performance in the presence of hidden nodes. Specifically, simulation results show that it is the random backoff exponent that is of paramount importance for resolving collisions and not the number of times the channel is sensed before transmitting. However, the random backoff is ineffective in the presence of hidden nodes. The proposed design uses a new algorithm to increase the sensing coverage area, and therefore greatly reduces the chance of packet collisions due to hidden nodes. Moreover, the design uses a new dynamic transmission power control (TPC) to further reduce energy consumption and interference. The above proposed changes can smoothly coexist with the legacy 802.15.4 CSMA/CA. Finally, an improved two dimensional discrete time Markov chain model is proposed to capture the performance of the slotted 802.15.4 CSMA/CA. This model rectifies minor issues apparent in previous studies. The relationship derived for the successful transmission probability, throughput and average energy consumption, will provide better performance predictions. It will also offer greater insight into the strengths and weaknesses of the MAC operation, and possible enhancement opportunities. Overall, the work presented in this thesis provides several significant insights into WSN performance improvements with both existing protocols and newly designed protocols. Finally, some of the numerous challenges for future research are described