Multiresolution analysis using wavelet, ridgelet, and curvelet transforms for medical image segmentation

Copyright @ 2011 Shadi AlZubi et al. This article has been made available through the Brunel Open Access Publishing Fund.The experimental study presented in this paper is aimed at the development of an automatic image segmentation system for classifying region of interest (ROI) in medical images which are obtained from different medical scanners such as PET, CT, or MRI. Multiresolution analysis (MRA) using wavelet, ridgelet, and curvelet transforms has been used in the proposed segmentation system. It is particularly a challenging task to classify cancers in human organs in scanners output using shape or gray-level information; organs shape changes throw different slices in medical stack and the gray-level intensity overlap in soft tissues. Curvelet transform is a new extension of wavelet and ridgelet transforms which aims to deal with interesting phenomena occurring along curves. Curvelet transforms has been tested on medical data sets, and results are compared with those obtained from the other transforms. Tests indicate that using curvelet significantly improves the classification of abnormal tissues in the scans and reduce the surrounding noise

A Fusion Framework for Camouflaged Moving Foreground Detection in the Wavelet Domain

Detecting camouflaged moving foreground objects has been known to be difficult due to the similarity between the foreground objects and the background. Conventional methods cannot distinguish the foreground from background due to the small differences between them and thus suffer from under-detection of the camouflaged foreground objects. In this paper, we present a fusion framework to address this problem in the wavelet domain. We first show that the small differences in the image domain can be highlighted in certain wavelet bands. Then the likelihood of each wavelet coefficient being foreground is estimated by formulating foreground and background models for each wavelet band. The proposed framework effectively aggregates the likelihoods from different wavelet bands based on the characteristics of the wavelet transform. Experimental results demonstrated that the proposed method significantly outperformed existing methods in detecting camouflaged foreground objects. Specifically, the average F-measure for the proposed algorithm was 0.87, compared to 0.71 to 0.8 for the other state-of-the-art methods.Comment: 13 pages, accepted by IEEE TI

Multiresolution analysis as an approach for tool path planning in NC machining

Wavelets permit multiresolution analysis of curves and surfaces. A complex curve can be decomposed using wavelet theory into lower resolution curves. The low-resolution (coarse) curves are similar to rough-cuts and high-resolution (fine) curves to finish-cuts in numerical controlled (NC) machining.;In this project, we investigate the applicability of multiresolution analysis using B-spline wavelets to NC machining of contoured 2D objects. High-resolution curves are used close to the object boundary similar to conventional offsetting, while lower resolution curves, straight lines and circular arcs are used farther away from the object boundary.;Experimental results indicate that wavelet-based multiresolution tool path planning improves machining efficiency. Tool path length is reduced, sharp corners are smoothed out thereby reducing uncut areas and larger tools can be selected for rough-cuts

Variable illumination and invariant features for detecting and classifying varnish defects

This work presents a method to detect and classify varnish defects on wood surfaces. Since these defects are only partially visible under certain illumination directions, one image doesn\u27t provide enough information for a recognition task. A classification requires inspecting the surface under different illumination directions, which results in image series. The information is distributed along this series and can be extracted by merging the knowledge about the defect shape and light direction

Automated image inspection using wavelet decomposition and fuzzy rule-based classifier

A general purpose image inspecting system has been developed for automatic flaw detection in industrial applications. The system has a general purpose image understanding architecture that performs local feature extraction and supervised classification. Local features of an image are extracted from the compactly supported wavelet transform of the image. The features extracted from the wavelet transform provide local harmonic analysis and multi-resolution representation of the image. Image segmentation is achieved by classifying image pixels based on features extracted within a local area near each pixel. The supervised classifier used in the segmentation process is a fuzzy rule-based classifier which is established from the training data. The fuzzy rule base that is used to control the performance of the classifier is optimized by combining similar training data into the same rule. Therefore an optimization is achieved for the established rule base to provide the maximum amount of information with the minimum amount of rules. The experimental results show that the features extracted from the wavelet decomposition give contextual information for the test images. The optimized fuzzy rule-based classifier gives the best performance in both the training and the classification stages. Flaws in the test images are detected automatically by the computer

Variable illumination and invariant features for detecting and classifying varnish defects

This work presents a method to detect and classify varnish defects on wood surfaces. Since these defects are only partially visible under certain illumination directions, one image doesn't provide enough information for a recognition task. A classification requires inspecting the surface under different illumination directions, which results in image series. The information is distributed along this series and can be extracted by merging the knowledge about the defect shape and light direction

Multi-scale data fusion for surface metrology

The major trends in manufacturing are miniaturization, convergence of the traditional research fields and creation of interdisciplinary research areas. These trends have resulted in the development of multi-scale models and multi-scale surfaces to optimize the performance. Multi-scale surfaces that exhibit specific properties at different scales for a specific purpose require multi-scale measurement and characterization. Researchers and instrument developers have developed instruments that are able to perform measurements at multiple scales but lack the much required multi- scale characterization capability. The primary focus of this research was to explore possible multi-scale data fusion strategies and options for surface metrology domain and to develop enabling software tools in order to obtain effective multi-scale surface characterization, maximizing fidelity while minimizing measurement cost and time. This research effort explored the fusion strategies for surface metrology domain and narrowed the focus on Discrete Wavelet Frame (DWF) based multi-scale decomposition. An optimized multi-scale data fusion strategy ‘FWR method’ was developed and was successfully demonstrated on both high aspect ratio surfaces and non-planar surfaces. It was demonstrated that the datum features can be effectively characterized at a lower resolution using one system (Vision CMM) and the actual features of interest could be characterized at a higher resolution using another system (Coherence Scanning Interferometer) with higher capability while minimizing the measurement time

Learning Rigid Image Registration - Utilizing Convolutional Neural Networks for Medical Image Registration

Many traditional computer vision tasks, such as segmentation, have seen large step-changes in accuracy and/or speed with the application of Convolutional Neural Networks (CNNs). Image registration, the alignment of two or more images to a common space, is a fundamental step in many medical imaging workflows. In this paper we investigate whether these techniques can also bring tangible benefits to the registration task. We describe and evaluate the use of convolutional neural networks (CNNs) for both mono- and multi- modality registration and compare their performance to more traditional schemes, namely multi-scale, iterative registration. This paper also investigates incorporating inverse consistency of the learned spatial transformations to impose additional constraints on the network during training and investigate any benefit in accuracy during detection. The approaches are validated with a series of artificial mono-modal registration tasks utilizing T1-weighted MR brain i mages from the Open Access Series of Imaging Studies (OASIS) study and IXI brain development dataset and a series of real multi-modality registration tasks using T1-weighted and T2-weighted MR brain images from the 2015 Ischemia Stroke Lesion segmentation (ISLES) challenge. The results demonstrate that CNNs give excellent performance for both mono- and multi- modality head and neck registration compared to the baseline method with significantly fewer outliers and lower mean errors