PROCESS FOR BREAKING DOWN THE LTE SIGNAL TO EXTRACT KEY INFORMATION

The increasingly important role of Long Term Evolution (LTE) has increased security concerns among the service providers and end users and made security of the network even more indispensable. The main thrust of this thesis is to investigate if the LTE signal can be broken down in a methodical way to obtain information that would otherwise be private; e.g., the Global Positioning System (GPS) location of the user equipment/base station or identity (ID) of the user. The study made use of signal simulators and software to analyze the LTE signal to develop a method to remove noise, breakdown the LTE signal and extract desired information. From the simulation results, it was possible to extract key information in the downlink like the Downlink Control Information (DCI), Cell-Radio Network Temporary Identifier (C-RNTI) and physical Cell Identity (Cell-ID). This information can be modified to cause service disruptions in the network within a reasonable amount of time and with modest computing resources.Defence Science and Technology Agency, SingaporeApproved for public release; distribution is unlimited

Traffic characteristics mechanism for detecting rogue access point in local area network

Rogue Access Point (RAP) is a network vulnerability involving illicit usage of wireless access point in a network environment. The existence of RAP can be identified using network traffic inspection. The purpose of this thesis is to present a study on the use of local area network (LAN) traffic characterisation for typifying wired and wireless network traffic through examination of packet exchange between sender and receiver by using inbound packet capturing with time stamping to indicate the existence of a RAP. The research is based on the analysis of synchronisation response (SYN/ACK), close connection respond (FIN/ACK), push respond (PSH/ACK), and data send (PAYLOAD) of the provider’s flags which are paired with their respective receiver acknowledgment (ACK). The timestamp of each pair is grouped using the Equal Group technique, which produced group means. These means were then categorised into three zones to form zone means. Subsequently, the zone means were used to generate a global mean that served as a threshold value for identifying RAP. A network testbed was developed from which real network traffic was captured and analysed. A mechanism to typify wired and wireless LAN traffic using the analysis of the global mean used in the RAP detection process has been proposed. The research calculated RAP detection threshold value of 0.002 ms for the wired IEEE 802.3 LAN, while wireless IEEE 802.11g is 0.014 ms and IEEE 802.11n is 0.033 ms respectively. This study has contributed a new mechanism for detecting a RAP through traffic characterisation by examining packet communication in the LAN environment. The detection of RAP is crucial in the effort to reduce vulnerability and to ensure integrity of data exchange in LA

ACUTA Journal of Telecommunications in Higher Education

In This Issue 5G\u27s Promise: 1,000 x Capacity, 1,000 x Challenges Higher-Speed WLANs About to Emerge State of the Residential Network 2013 LTE: The Next Wave of Wireless Evolution The 10 Most Costly Pitfalls of DAS Deployment and How to Avoid Them DAS on Campus: Solutions for Wireless Service Decision Criteria for Selecting a Wireless lntrusion Prevention System lnstitutional Excellence Award President\u27s Message From the CE

Quality of service differentiation for multimedia delivery in wireless LANs

Delivering multimedia content to heterogeneous devices over a variable networking environment while maintaining high quality levels involves many technical challenges. The research reported in this thesis presents a solution for Quality of Service (QoS)-based service differentiation when delivering multimedia content over the wireless LANs. This thesis has three major contributions outlined below: 1. A Model-based Bandwidth Estimation algorithm (MBE), which estimates the available bandwidth based on novel TCP and UDP throughput models over IEEE 802.11 WLANs. MBE has been modelled, implemented, and tested through simulations and real life testing. In comparison with other bandwidth estimation techniques, MBE shows better performance in terms of error rate, overhead, and loss. 2. An intelligent Prioritized Adaptive Scheme (iPAS), which provides QoS service differentiation for multimedia delivery in wireless networks. iPAS assigns dynamic priorities to various streams and determines their bandwidth share by employing a probabilistic approach-which makes use of stereotypes. The total bandwidth to be allocated is estimated using MBE. The priority level of individual stream is variable and dependent on stream-related characteristics and delivery QoS parameters. iPAS can be deployed seamlessly over the original IEEE 802.11 protocols and can be included in the IEEE 802.21 framework in order to optimize the control signal communication. iPAS has been modelled, implemented, and evaluated via simulations. The results demonstrate that iPAS achieves better performance than the equal channel access mechanism over IEEE 802.11 DCF and a service differentiation scheme on top of IEEE 802.11e EDCA, in terms of fairness, throughput, delay, loss, and estimated PSNR. Additionally, both objective and subjective video quality assessment have been performed using a prototype system. 3. A QoS-based Downlink/Uplink Fairness Scheme, which uses the stereotypes-based structure to balance the QoS parameters (i.e. throughput, delay, and loss) between downlink and uplink VoIP traffic. The proposed scheme has been modelled and tested through simulations. The results show that, in comparison with other downlink/uplink fairness-oriented solutions, the proposed scheme performs better in terms of VoIP capacity and fairness level between downlink and uplink traffic

Economically sustainable public security and emergency network exploiting a broadband communications satellite

The research contributes to work in Rapid Deployment of a National Public Security and Emergency Communications Network using Communication Satellite Broadband. Although studies in Public Security Communication networks have examined the use of communications satellite as an integral part of the Communication Infrastructure, there has not been an in-depth design analysis of an optimized regional broadband-based communication satellite in relation to the envisaged service coverage area, with little or no terrestrial last-mile telecommunications infrastructure for delivery of satellite solutions, applications and services. As such, the research provides a case study of a Nigerian Public Safety Security Communications Pilot project deployed in regions of the African continent with inadequate terrestrial last mile infrastructure and thus requiring a robust regional Communications Satellite complemented with variants of terrestrial wireless technologies to bridge the digital hiatus as a short and medium term measure apart from other strategic needs. The research not only addresses the pivotal role of a secured integrated communications Public safety network for security agencies and emergency service organizations with its potential to foster efficient information symmetry amongst their operations including during emergency and crisis management in a timely manner but demonstrates a working model of how analogue spectrum meant for Push-to-Talk (PTT) services can be re-farmed and digitalized as a “dedicated” broadband-based public communications system. The network’s sustainability can be secured by using excess capacity for the strategic commercial telecommunication needs of the state and its citizens. Utilization of scarce spectrum has been deployed for Nigeria’s Cashless policy pilot project for financial and digital inclusion. This effectively drives the universal access goals, without exclusivity, in a continent, which still remains the least wired in the world

Real-time wireless networks for industrial control systems

The next generation of industrial systems (Industry 4.0) will dramatically transform manyproductive sectors, integrating emerging concepts such as Internet of Things, artificialintelligence, big data, cloud robotics and virtual reality, to name a few. Most of thesetechnologies heavily rely on the availability of communication networks able to offernearly–istantaneous, secure and reliable data transfer. In the industrial sector, these tasks are nowadays mainly accomplished by wired networks, that combine the speed ofoptical fiber media with collision–free switching technology. However, driven by the pervasive deployment of mobile devices for personal com-munications in the last years, more and more industrial applications require wireless connectivity, which can bring enormous advantages in terms of cost reduction and flex-ibility. Designing timely, reliable and deterministic industrial wireless networks is a complicated task, due to the nature of the wireless channel, intrinsically error–prone andshared among all the devices transmitting on the same frequency band. In this thesis, several solutions to enhance the performance of wireless networks employed in industrial control applications are proposed. The presented approaches differ in terms of achieved performance and target applications, but they are all characterized by an improvement over existing industrial wireless solutions in terms of timeliness, reliability and determinism. When possible, an experimental validation of the designed solutions is provided. The obtained results prove that significant performance improvements are already possible, often using commercially available devices and preserving compliance to existing standards. Future research efforts, combined with the availability of new chipsets and standards, could lead to a world where wireless links effectively replace most of the existing cables in industrial environments, as it is already the case in the consumer market

Fast-tracking the digital revolution : broadband for Latin America and the Caribbean

This study is based on the premise that broadband is central to a technological, organizational and social innovation system, one which calls for new policies that are flexible, long-term approaches encompassing the objectives of greater productivity, innovation, competitiveness, social inclusion and sustainability. The study focuses on improving and developing broadband accessibility in Latin America and Caribbean (LAC) countries, alongside strategies for the development of public policies, including the role of the State, the role of regulation in market growth and service access, demand incentives, and the proper management of scarce resources such as spectrum availability