Fault tolerant control of a quadrotor using L-1 adaptive control

Purpose – The growing use of small unmanned rotorcraft in civilian applications means that safe operation is increasingly important. The purpose of this paper is to investigate the fault tolerant properties to faults in the actuators of an L1 adaptive controller for a quadrotor vehicle. Design/methodology/approach – L1 adaptive control provides fast adaptation along with decoupling between adaptation and robustness. This makes the approach a suitable candidate for fault tolerant control of quadrotor and other multirotor vehicles. In the paper, the design of an L1 adaptive controller is presented. The controller is compared to a fixed-gain LQR controller. Findings – The L1 adaptive controller is shown to have improved performance when subject to actuator faults, and a higher range of actuator fault tolerance. Research limitations/implications – The control scheme is tested in simulation of a simple model that ignores aerodynamic and gyroscopic effects. Hence for further work, testing with a more complete model is recommended followed by implementation on an actual platform and flight test. The effect of sensor noise should also be considered along with investigation into the influence of wind disturbances and tolerance to sensor failures. Furthermore, quadrotors cannot tolerate total failure of a rotor without loss of control of one of the degrees of freedom, this aspect requires further investigation. Practical implications – Applying the L1 adaptive controller to a hexrotor or octorotor would increase the reliability of such vehicles without recourse to methods that require fault detection schemes and control reallocation as well as providing tolerance to a total loss of a rotor. Social implications – In order for quadrotors and other similar unmanned air vehicles to undertake many proposed roles, a high level of safety is required. Hence the controllers should be fault tolerant. Originality/value – Fault tolerance to partial actuator/effector faults is demonstrated using an L1 adaptive controller

Nonlinear Feedback Control of Axisymmetric Aerial Vehicles

We investigate the use of simple aerodynamic models for the feedback control of aerial vehicles with large flight envelopes. Thrust-propelled vehicles with a body shape symmetric with respect to the thrust axis are considered. Upon a condition on the aerodynamic characteristics of the vehicle, we show that the equilibrium orientation can be explicitly determined as a function of the desired flight velocity. This allows for the adaptation of previously proposed control design approaches based on the thrust direction control paradigm. Simulation results conducted by using measured aerodynamic characteristics of quasi-axisymmetric bodies illustrate the soundness of the proposed approach

Backpropagating constraints-based trajectory tracking control of a quadrotor with constrained actuator dynamics and complex unknowns

In this paper, a backpropagating constraints-based trajectory tracking control (BCTTC) scheme is addressed for trajectory tracking of a quadrotor with complex unknowns and cascade constraints arising from constrained actuator dynamics, including saturations and dead zones. The entire quadrotor system including actuator dynamics is decomposed into five cascade subsystems connected by intermediate saturated nonlinearities. By virtue of the cascade structure, backpropagating constraints (BCs) on intermediate signals are derived from constrained actuator dynamics suffering from nonreversible rotations and nonnegative squares of rotors, and decouple subsystems with saturated connections. Combining with sliding-mode errors, BC-based virtual controls are individually designed by addressing underactuation and cascade constraints. In order to remove smoothness requirements on intermediate controls, first-order filters are employed, and thereby contributing to backstepping-like subcontrollers synthesizing in a recursive manner. Moreover, universal adaptive compensators are exclusively devised to dominate intermediate tracking residuals and complex unknowns. Eventually, the closed-loop BCTTC system stability can be ensured by the Lyapunov synthesis, and trajectory tracking errors can be made arbitrarily small. Simulation studies demonstrate the effectiveness and superiority of the proposed BCTTC scheme for a quadrotor with complex constrains and unknowns

Development Of A Quadrotor Testbed For Control And Sensor Development

A quadrotor is an under actuated unmanned aerial vehicle (UAV) which uses thrust from four rotors to provide six degrees of freedom. This thesis outlines the development of a general purpose test bed that can be used for sensor and control algorithm development. The system includes the means to simulate a proposed controller and then a hardware in the loop implementation using the same software. The test bed was assembled and verified with a linear controller for both attitude and position control using feedback from an IMU (Inertial measurement Unit) and a Global Position System (GPS) sensor. The linear controller was first implemented as a PID controller which attempts to control the attitude of the quadrotor. The controller was simulated successfully and then experiments were conducted on a DraganFlyer X-Pro quadrotor to verify the closed loop control. The experiments conducted checked the response of the quadrotor angles to the commanded angles. The controller gains were tuned to provide stable hover in all three angles. The Videre stereo vision system was investigated as a sensor to estimate height of the UAV above the ground. Experiments were performed that show that show static (no motion of the camera) estimates over the range 0.5 - 4 meters. The accuracy of these measurements suggest that the system may provide improved height estimation, over WAAS corrected GPS. A means to add this sensor into the UAV test bed is discussed

Bounded attitude control of rigid bodies: Real-time experimentation to a quadrotor mini-helicopter

International audienceA quaternion-based feedback is developed for the attitude stabilization of rigid bodies. The control design takes into account a priori input bounds and is based on nested saturation approach. It results in a very simple controller suitable for an embedded use with low computational resources available. The proposed method is generic not restricted to symmetric rigid bodies and does not require the knowledge of the inertia matrix of the body. The control law can be tuned to force closed-loop trajectories to enter in some a priori fixed neighborhood of the origin in a finite time and remain thereafter. The global stability is guaranteed in the case where angular velocities sensors have limited measurement range. The control law is experimentally applied to the attitude stabilization of a quadrotor mini-helicopter