4,686 research outputs found
Safety-related Tasks within the Set-Based Task-Priority Inverse Kinematics Framework
In this paper we present a framework that allows the motion control of a
robotic arm automatically handling different kinds of safety-related tasks. The
developed controller is based on a Task-Priority Inverse Kinematics algorithm
that allows the manipulator's motion while respecting constraints defined
either in the joint or in the operational space in the form of equality-based
or set-based tasks. This gives the possibility to define, among the others,
tasks as joint-limits, obstacle avoidance or limiting the workspace in the
operational space. Additionally, an algorithm for the real-time computation of
the minimum distance between the manipulator and other objects in the
environment using depth measurements has been implemented, effectively allowing
obstacle avoidance tasks. Experiments with a Jaco manipulator, operating in
an environment where an RGB-D sensor is used for the obstacles detection, show
the effectiveness of the developed system
Handling robot constraints within a Set-Based Multi-Task Priority Inverse Kinematics Framework
Set-Based Multi-Task Priority is a recent framework to handle inverse
kinematics for redundant structures. Both equality tasks, i.e., control
objectives to be driven to a desired value, and set-bases tasks, i.e., control
objectives to be satisfied with a set/range of values can be addressed in a
rigorous manner within a priority framework. In addition, optimization tasks,
driven by the gradient of a proper function, may be considered as well, usually
as lower priority tasks. In this paper the proper design of the tasks, their
priority and the use of a Set-Based Multi-Task Priority framework is proposed
in order to handle several constraints simultaneously in real-time. It is shown
that safety related tasks such as, e.g., joint limits or kinematic singularity,
may be properly handled by consider them both at an higher priority as
set-based task and at a lower within a proper optimization functional.
Experimental results on a 7DOF Jaco$^2
Dynamic whole-body motion generation under rigid contacts and other unilateral constraints
The most widely used technique for generating wholebody motions on a humanoid robot accounting for various tasks and constraints is inverse kinematics. Based on the task-function approach, this class of methods enables the coordination of robot movements to execute several tasks in parallel and account for the sensor feedback in real time, thanks to the low computation cost.
To some extent, it also enables us to deal with some of the robot constraints (e.g., joint limits or visibility) and manage the quasi-static balance of the robot. In order to fully use the whole range of possible motions, this paper proposes extending the task-function approach to handle the full dynamics of the robot multibody along with any constraint written as equality or inequality of the state and control variables. The definition of multiple objectives is made possible by ordering them inside a strict hierarchy. Several models of contact with the environment can be implemented in the framework. We propose a reduced formulation of the multiple rigid planar contact that keeps a low computation cost. The efficiency of this approach is illustrated by presenting several multicontact dynamic motions in simulation and on the real HRP-2 robot
Satellite-Based Tele-Operation of an Underwater Vehicle-Manipulator System. Preliminary Experimental Results
Within the European project DexROV the topic of underwater intervention is addressed. In particular, a remote control room is connected through a satellite communication link to surface vessel, which is in turn connected to an UVMS (Underwater Vehicle-Manipulator System) with an umbilical cable. The operator may interact with the system using a joystick or exoskeleton. Since a direct teleoperation is not feasible, a cognitive engine is in charge of handling communication latency or interruptions caused by the satellite link, and the UVMS should have sufficient autonomy in dealing with low level constraints or secondary objectives. To this purpose, a task-priority-based inverse kinematics algorithm has been developed in order to allow the operator to control only the end effector, while the algorithm is in charge of handling both operative and joint-space constraints. This paper describes some preliminary experimental results achieved during the DexROV campaign of July 2017 in Marseilles (France), where most of the components have been successfully integrated and the inverse kinematics nicely run
- âŚ