AN INVESTIGATION OF ELECTROMYOGRAPHIC (EMG) CONTROL OF DEXTROUS HAND PROSTHESES FOR TRANSRADIAL AMPUTEES

In reference to IEEE copyrighted material which is used with permission in this thesis, the IEEE does not endorse any of Plymouth University's products or services.There are many amputees around the world who have lost a limb through conflict, disease or an accident. Upper-limb prostheses controlled using surface Electromyography (sEMG) offer a solution to help the amputees; however, their functionality is limited by the small number of movements they can perform and their slow reaction times. Pattern recognition (PR)-based EMG control has been proposed to improve the functional performance of prostheses. It is a very promising approach, offering intuitive control, fast reaction times and the ability to control a large number of degrees of freedom (DOF). However, prostheses controlled with PR systems are not available for everyday use by amputees, because there are many major challenges and practical problems that need to be addressed before clinical implementation is possible. These include lack of individual finger control, an impractically large number of EMG electrodes, and the lack of deployment protocols for EMG electrodes site selection and movement optimisation. Moreover, the inability of PR systems to handle multiple forces is a further practical problem that needs to be addressed. The main aim of this project is to investigate the research challenges mentioned above via non-invasive EMG signal acquisition, and to propose practical solutions to help amputees. In a series of experiments, the PR systems presented here were tested with EMG signals acquired from seven transradial amputees, which is unique to this project. Previous studies have been conducted using non-amputees. In this work, the challenges described are addressed and a new protocol is proposed that delivers a fast clinical deployment of multi-functional upper limb prostheses controlled by PR systems. Controlling finger movement is a step towards the restoration of lost human capabilities, and is psychologically important, as well as physically. A central thread running through this work is the assertion that no two amputees are the same, each suffering different injuries and retaining differing nerve and muscle structures. This work is very much about individualised healthcare, and aims to provide the best possible solution for each affected individual on a case-by-case basis. Therefore, the approach has been to optimise the solution (in terms of function and reliability) for each individual, as opposed to developing a generic solution, where performance is optimised against a test population. This work is unique, in that it contributes to improving the quality of life for each individual amputee by optimising function and reliability. The main four contributions of the thesis are as follows: 1- Individual finger control was achieved with high accuracy for a large number of finger movements, using six optimally placed sEMG channels. This was validated on EMG signals for ten non-amputee and six amputee subjects. Thumb movements were classified successfully with high accuracy for the first time. The outcome of this investigation will help to add more movements to the prosthesis, and reduce hardware and computational complexity. 2- A new subject-specific protocol for sEMG site selection and reliable movement subset optimisation, based on the amputee’s needs, has been proposed and validated on seven amputees. This protocol will help clinicians to perform an efficient and fast deployment of prostheses, by finding the optimal number and locations of EMG channels. It will also find a reliable subset of movements that can be achieved with high performance. 3- The relationship between the force of contraction and the statistics of EMG signals has been investigated, utilising an experimental design where visual feedback from a Myoelectric Control Interface (MCI) helped the participants to produce the correct level of force. Kurtosis values were found to decrease monotonically when the contraction level increased, thus indicating that kurtosis can be used to distinguish different forces of contractions. 4- The real practical problem of the degradation of classification performance as a result of the variation of force levels during daily use of the prosthesis has been investigated, and solved by proposing a training approach and the use of a robust feature extraction method, based on the spectrum. The recommendations of this investigation improve the practical robustness of prostheses controlled with PR systems and progress a step further towards clinical implementation and improving the quality of life of amputees. The project showed that PR systems achieved a reliable performance for a large number of amputees, taking into account real life issues such as individual finger control for high dexterity, the effect of force level variation, and optimisation of the movements and EMG channels for each individual amputee. The findings of this thesis showed that the PR systems need to be appropriately tuned before usage, such as training with multiple forces to help to reduce the effect of force variation, aiming to improve practical robustness, and also finding the optimal EMG channel for each amputee, to improve the PR system’s performance. The outcome of this research enables the implementation of PR systems in real prostheses that can be used by amputees.Ministry of Higher Education and Scientific Research and Baghdad University- Baghdad/Ira

Feature Analysis for Classification of Physical Actions using surface EMG Data

Based on recent health statistics, there are several thousands of people with limb disability and gait disorders that require a medical assistance. A robot assisted rehabilitation therapy can help them recover and return to a normal life. In this scenario, a successful methodology is to use the EMG signal based information to control the support robotics. For this mechanism to function properly, the EMG signal from the muscles has to be sensed and then the biological motor intention has to be decoded and finally the resulting information has to be communicated to the controller of the robot. An accurate detection of the motor intention requires a pattern recognition based categorical identification. Hence in this paper, we propose an improved classification framework by identification of the relevant features that drive the pattern recognition algorithm. Major contributions include a set of modified spectral moment based features and another relevant inter-channel correlation feature that contribute to an improved classification performance. Next, we conducted a sensitivity analysis of the classification algorithm to different EMG channels. Finally, the classifier performance is compared to that of the other state-of the art algorithm

Transradial Amputee Gesture Classification Using an Optimal Number of sEMG Sensors: An Approach Using ICA Clustering

© 2001-2011 IEEE. Surface electromyography (sEMG)-based pattern recognition studies have been widely used to improve the classification accuracy of upper limb gestures. Information extracted from multiple sensors of the sEMG recording sites can be used as inputs to control powered upper limb prostheses. However, usage of multiple EMG sensors on the prosthetic hand is not practical and makes it difficult for amputees due to electrode shift/movement, and often amputees feel discomfort in wearing sEMG sensor array. Instead, using fewer numbers of sensors would greatly improve the controllability of prosthetic devices and it would add dexterity and flexibility in their operation. In this paper, we propose a novel myoelectric control technique for identification of various gestures using the minimum number of sensors based on independent component analysis (ICA) and Icasso clustering. The proposed method is a model-based approach where a combination of source separation and Icasso clustering was utilized to improve the classification performance of independent finger movements for transradial amputee subjects. Two sEMG sensor combinations were investigated based on the muscle morphology and Icasso clustering and compared to Sequential Forward Selection (SFS) and greedy search algorithm. The performance of the proposed method has been validated with five transradial amputees, which reports a higher classification accuracy (> 95%). The outcome of this study encourages possible extension of the proposed approach to real time prosthetic applications

Biceps brachii synergy and its contribution to target reaching tasks within a virtual cube

Ces dernières années, des travaux importants ont été observés dans le développement du contrôle prothétique afin d'aider les personnes amputées du membre supérieur à améliorer leur qualité de vie au quotidien. Certaines prothèses myoélectriques modernes des membres supérieurs disponibles dans le commerce ont de nombreux degrés de liberté et nécessitent de nombreux signaux de contrôle pour réaliser plusieurs tâches fréquemment utilisées dans la vie quotidienne. Pour obtenir plusieurs signaux de contrôle, de nombreux muscles sont requis mais pour les personnes ayant subi une amputation du membre supérieur, le nombre de muscles disponibles est plus ou moins réduit selon le niveau de l’amputation. Pour accroître le nombre de signaux de contrôle, nous nous sommes intéressés au biceps brachial, vu qu’anatomiquement il est formé de 2 chefs et que de la présence de compartiments a été observée sur sa face interne. Physiologiquement, il a été trouvé que les unités motrices du biceps sont activées à différents endroits du muscle lors de la production de diverses tâches fonctionnelles. De plus, il semblerait que le système nerveux central puisse se servir de la synergie musculaire pour arriver à facilement produire plusieurs mouvements. Dans un premier temps on a donc identifié que la synergie musculaire était présente chez le biceps de sujets normaux et on a montré que les caractéristiques de cette synergie permettaient d’identifier la posture statique de la main lorsque les signaux du biceps avaient été enregistrés. Dans un deuxième temps, on a réussi à démontrer qu’il était possible, dans un cube présenté sur écran, à contrôler la position d’une sphère en vue d’atteindre diverses cibles en utilisant la synergie musculaire du biceps. Les techniques de classification utilisées pourraient servir à faciliter le contrôle des prothèses myoélectriques.In recent years, important work has been done in the development of prosthetic control to help upper limb amputees improve their quality of life on a daily basis. Some modern commercially available upper limb myoelectric prostheses have many degrees of freedom and require many control signals to perform several tasks commonly used in everyday life. To obtain several control signals, many muscles are required, but for people with upper limb amputation, the number of muscles available is more or less reduced, depending on the level of amputation. To increase the number of control signals, we were interested in the biceps brachii, since it is anatomically composed of 2 heads and the presence of compartments was observed on its internal face. Physiologically, it has been found that the motor units of the biceps are activated at different places of the muscle during production of various functional tasks. In addition, it appears that the central nervous system can use muscle synergy to easily produce multiple movements. In this research, muscle synergy was first identified to be present in the biceps of normal subjects, and it was shown that the characteristics of this synergy allowed the identification of static posture of the hand when the biceps signals had been recorded. In a second investigation, we demonstrated that it was possible in a virtual cube presented on a screen to control online the position of a sphere to reach various targets by using muscle synergy of the biceps. Classification techniques have been used to improve the classification of muscular synergy features, and these classification techniques can be integrated with control algorithm that produces dynamic movement of myoelectric prostheses to facilitate the training of prosthetic control

Stationary wavelet processing and data imputing in myoelectric pattern recognition on a low-cost embedded system

Pattern recognition-based decoding of surface electromyography allows for intuitive and flexible control of prostheses but comes at the cost of sensitivity to in-band noise and sensor faults. System robustness can be improved with wavelet-based signal processing and data imputing, but no attempt has been made to implement such algorithms on real-time, portable systems. The aim of this work was to investigate the feasibility of low-latency, wavelet-based processing and data imputing on an embedded device capable of controlling upper-arm prostheses. Nine able-bodied subjects performed Motion Tests while inducing transient disturbances. Additional investigation was performed on pre-recorded Motion Tests from 15 able-bodied subjects with simulated disturbances. Results from real-time tests were inconclusive, likely due to the low number of disturbance episodes, but simulated tests showed significant improvements in most metrics for both algorithms. However, both algorithms also showed reduced responsiveness during disturbance episodes. These results suggest wavelet-based processing and data imputing can be implemented in portable, real-time systems to potentially improve robustness to signal distortion in prosthetic devices with the caveat of reduced responsiveness for the typically short duration of signal disturbances. The trade-off between large-scale signal corruption robustness and system responsiveness warrants further studies in daily life activities