Computationally light attitude controls for resource limited nano-spacecraft

Nano-spacecraft have emerged as practical alternatives to large conventional spacecraft for specific missions (e.g. as technology demonstrators) due to their low cost and short time to launch. However these spacecraft have a number of limitations compared to larger spacecraft: a tendency to tumble post-launch; lower computational power in relation to larger satellites and limited propulsion systems due to small payload capacity. As a result new methodologies for attitude control are required to meet the challenges associated with nano-spacecraft. This paper presents two novel attitude control methods to tackle two phases of a mission using zero-propellant (i) the detumbling post-launch and (ii) the repointing of nano-spacecraft. The first method consists of a time-delayed feedback control law which is applied to a magnetically actuated spacecraft and used for autonomous detumbling. The second uses geometric mechanics to construct zero propellant reference manoeuvres which are then tracked using quaternion feedback control. The problem of detumbling a magnetically actuated spacecraft in the first phase of a mission is conventionally tackled using BDOT control. This involves applying controls which are proportional to the rate of change of the magnetic field. However, real systems contain sensor noise which can lead to discontinuities in the signal and problems with computing the numerical derivative. This means that a noise filter must be used and this increases the computational overhead of the system. It is shown that a timedelayed feedback control law is advantageous as the use of a delayed signal rather than a derivative negates the need for such a filter, thus reducing computational overhead. The second phase of the mission is the repointing of the spacecraft to a desired target. Exploiting the analytic solutions of the angular velocities of a symmetric spacecraft and further using Lax pair integration it is possible to derive exact equations of the natural motions including the time evolution of the quaternions. It is shown that parametric optimisation of these solutions can be used to generate low torque reference motions that match prescribed boundary conditions on the initial and final configurations. Through numerical simulation it is shown that these references can be tracked using nanospacecraft reaction wheels while eigenaxis rotations, used for comparison, are more torque intensive. As the method requires parameter optimisation as opposed to optimisation methods that require numerical integration, the computational effort is reduced

An application of adaptive fault-tolerant control to nano-spacecraft

Since nano-spacecraft are small, low cost and do not undergo the same rigor of testing as conventional spacecraft, they have a greater risk of failure. In this paper we address the problem of attitude control of a nano-spacecraft that experiences different types of faults. Based on the traditional quaternion feedback control method, an adaptive fault-tolerant control method is developed, which can ensure that the control system still operates when the actuator fault happens. This paper derives the fault-tolerant control logic under both actuator gain fault mode and actuator deviation fault mode. Taking the parameters of the UKube-1 in the simulation model, a comparison between a traditional spacecraft control method and the adaptive fault-tolerant control method in the presence of a fault is undertaken. It is shown that the proposed controller copes with faults and is able to complete an effective attitude control manoeuver in the presence of a fault

Spacecraft Attitude Stabilization with Piecewise-constant Magnetic Dipole Moment

In actual implementations of magnetic control laws for spacecraft attitude stabilization, the time in which Earth magnetic field is measured must be separated from the time in which magnetic dipole moment is generated. The latter separation translates into the constraint of being able to genere only piecewise-constant magnetic dipole moment. In this work we present attitude stabilization laws using only magnetic actuators that take into account of the latter aspect. Both a state feedback and an output feedback are presented, and it is shown that the proposed design allows for a systematic selection of the sampling period.Comment: arXiv admin note: text overlap with arXiv:1411.275

All-propulsion design of the drag-free and attitude control of the European satellite GOCE

This paper concerns the drag-free and attitude control (DFAC) of the European Gravity field and steady-state Ocean Circulation Explorer satellite (GOCE), during the science phase. GOCE aims to determine the Earth's gravity field with high accuracy and spatial resolution, through complementary space techniques such as gravity gradiometry and precise orbit determination. Both techniques rely on accurate attitude and drag-free control, especially in the gradiometer measurement bandwidth (5-100mHz), where non-gravitational forces must be counteracted down to micronewton, and spacecraft attitude must track the local orbital reference frame with micro-radian accuracy. DFAC aims to enable the gravity gradiometer to operate so as to determine the Earth's gravity field especially in the so-called measurement bandwidth (5-100mHz), making use of ion and micro-thruster actuators. The DFAC unit has been designed entirely on a simplified discrete-time model (Embedded Model) derived from the fine dynamics of the spacecraft and its environment; the relevant control algorithms are implemented and tuned around the Embedded Model, which is the core of the control unit. The DFAC has been tested against uncertainties in spacecraft and environment and its code has been the preliminary model for final code development. The DFAC assumes an all-propulsion command authority, partly abandoned by the actual GOCE control system because of electric micro-propulsion not being fully developed. Since all-propulsion authority is expected to be imperative for future scientific and observation missions, design and simulated results are believed to be of interest to the space communit

A robust optimization approach for magnetic spacecraft attitude stabilization

Attitude stabilization of spacecraft using magnetorquers can be achieved by a proportional–derivative-like control algorithm. The gains of this algorithm are usually determined by using a trial-and-error approach within the large search space of the possible values of the gains. However, when finding the gains in this manner, only a small portion of the search space is actually explored. We propose here an innovative and systematic approach for finding the gains: they should be those that minimize the settling time of the attitude error. However, the settling time depends also on initial conditions. Consequently, gains that minimize the settling time for specific initial conditions cannot guarantee the minimum settling time under different initial conditions. Initial conditions are not known in advance. We overcome this obstacle by formulating a min–max problem whose solution provides robust gains, which are gains that minimize the settling time under the worst initial conditions, thus producing good average behavior. An additional difficulty is that the settling time cannot be expressed in analytical form as a function of gains and initial conditions. Hence, our approach uses some derivative-free optimization algorithms as building blocks. These algorithms work without the need to write the objective function analytically: they only need to compute it at a number of points. Results obtained in a case study are very promising

Drag-free and attitude control for the GOCE satellite

The paper concerns Drag-Free and Attitude Control of the European satellite Gravity field and steady-state Ocean Circulation Explorer (GOCE) during the science phase. Design has followed Embedded Model Control, where a spacecraft/environment discrete-time model becomes the realtime control core and is interfaced to actuators and sensors via tuneable feedback laws. Drag-free control implies cancelling non-gravitational forces and all torques, leaving the satellite to free fall subject only to gravity. In addition, for reasons of science, the spacecraft must be carefully aligned to the local orbital frame, retrieved from range and rate of a Global Positioning System receiver. Accurate drag-free and attitude control requires proportional and low-noise thrusting, which in turn raises the problem of propellant saving. Six-axis drag-free control is driven by accurate acceleration measurements provided by the mission payload. Their angular components must be combined with the star-tracker attitude so as to compensate accelerometer drift. Simulated results are presented and discusse

Determining optimal parameters in magnetic spacecraft stabilization via attitude feedback

The attitude control of a spacecraft using magnetorquers can be achieved by a feedback control law which has four design parameters. However, the practical determination of appropriate values for these parameters is a critical open issue. We propose here an innovative systematic approach for finding these values: they should be those that minimize the convergence time to the desired attitude. This a particularly diffcult optimization problem, for several reasons: 1) such time cannot be expressed in analytical form as a function of parameters and initial conditions; 2) design parameters may range over very wide intervals; 3) convergence time depends also on the initial conditions of the spacecraft, which are not known in advance. To overcome these diffculties, we present a solution approach based on derivative-free optimization. These algorithms do not need to write analytically the objective function: they only need to compute it in a number of points. We also propose a fast probing technique to identify which regions of the search space have to be explored densely. Finally, we formulate a min-max model to find robust parameters, namely design parameters that minimize convergence time under the worst initial conditions. Results are very promising

Robustness analysis of magnetic torquer controlled spacecraft attitude dynamics

This paper describes a systematic approach to the robustness analysis of linear periodically time-varying (LPTV) systems. The method uses the technique known as Lifting to transform the original time-varying uncertain system into linear fractional transformation (LFT) form. The stability and performance robustness of the system to structured parametric uncertainty can then be analysed non-conservatively using the structured singular value μ. The method is applied to analyse the stability robustness of an attitude control law for a spacecraft controlled by magnetic torquer bars, whose linearised dynamics can naturally be written in linear periodically time-varying form. The proposed method allows maximum allowable levels of uncertainty, as well as worst-case uncertainty combinations to be computed. The destabilising effect of these uncertain parameter combinations is verified in time-domain simulations

Global magnetic attitude control of spacecraft in the presence of gravity gradient

Published versio

Magnetic Levitation for Long-Life Space Mechanisms: Technology Assessment and Remaining Challenges

Spacecraft mechanisms and mechanical systems must operate reliably and without failure to enable successful, long-term space missions. Such requirements place demands upon the tribological elements, especially bearings, which are frequently difficult or impossible to satisfy. Several recent, high-profile bearing failures in coolant fluid pumps and attitude control system (ACS) momentum wheels provided the impetus to assess the state-of-the-art non-contacting magnetic levitation-based, rotor support technologies.Magnetic levitation technology continues to gain acceptance for terrestrial applications and has been spaceflight demonstrated in mechanical systems such as reaction wheels (RWs) but is not in widespread use. The specific reasons inhibiting this new technology are not readily clear but include cost, weight, performance, and perceived risk. These reasons arise from a variety of real and perceived technical limitations in areas like materials, controls, sensors, thermal management and others. This white paper seeks to determine, define, and quantify the technical hurdles and gaps that must be overcome to enable the broad adoption of non-contacting bearings for long-life space mechanisms. It is anticipated that a better understanding of this complex topic may guide resource investments and clear the path to improved performance mechanical systems for spacecraft