Dispersed operating time control of a mechanical switch actuated by an ultrasonic motor

The ultrasonic motor is an uncertain time-varying nonlinear system because of the nonlinearity of the piezoelectric material, the friction and the temperature. For example, the operating time of the mechanical switch actuated by the ultrasonic motor in regular stroke is highly dispersed. Unfortunately, it is difficult to establish accurate mathematical model. In this paper, an analytical autoregressive process model (AR) is employed to identify and control the ultrasonic motor. First of all, dispersed operating time of the mechanical switch actuated by the ultrasonic motor is investigated. Then, the AR model is established to predict the operating time of the ultrasonic motor on the basis of the statistical data to reduce the nonlinear behavior of the ultrasonic motor, and to improve the accuracy and obtain a good time response of the switch. The simulation results are agreed with experimental results, confirming the effectiveness of proposed model. Furthermore, we adopt the predicted result of the AR model to control the mechanical switch actuated by the ultrasonic motor. The analytical investigation is fulfilled with two target operating time ranges, namely 12 ms and 24 ms. Comparison of the results obtained from the AR model and the experimentation reveal that the standard deviations are less than 95.3 μs and 102.7 μs with maximum errors equal to 0.41 % and 0.44 % respectively. Thereby, the proposed dispersed operating time control is performed. Findings indicate that the maximum errors for the operating time of the mechanical switch are less than 140 μs and 110 μs with ±0.85 % and ±0.42 % respectively

Design and evaluation of an MRI-compatible linear motion stage.

PURPOSE: To develop and evaluate a tool for accurate, reproducible, and programmable motion control of imaging phantoms for use in motion sensitive magnetic resonance imaging (MRI) appli cations. METHODS: In this paper, the authors introduce a compact linear motion stage that is made of nonmagnetic material and is actuated with an ultrasonic motor. The stage can be positioned at arbitrary positions and orientations inside the scanner bore to move, push, or pull arbitrary phantoms. Using optical trackers, measuring microscopes, and navigators, the accuracy of the stage in motion control was evaluated. Also, the effect of the stage on image signal-to-noise ratio (SNR), artifacts, and B0 field homogeneity was evaluated. RESULTS: The error of the stage in reaching fixed positions was 0.025 ± 0.021 mm. In execution of dynamic motion profiles, the worst-case normalized root mean squared error was below 7% (for frequencies below 0.33 Hz). Experiments demonstrated that the stage did not introduce artifacts nor did it degrade the image SNR. The effect of the stage on the B0 field was less than 2 ppm. CONCLUSIONS: The results of the experiments indicate that the proposed system is MRI-compatible and can create reliable and reproducible motion that may be used for validation and assessment of motion related MRI applications

Advancements in Sensor Technologies and Control Strategies for Lower-Limb Rehabilitation Exoskeletons: A Comprehensive Review

Lower-limb rehabilitation exoskeletons offer a transformative approach to enhancing recovery in patients with movement disorders affecting the lower extremities. This comprehensive systematic review delves into the literature on sensor technologies and the control strategies integrated into these exoskeletons, evaluating their capacity to address user needs and scrutinizing their structural designs regarding sensor distribution as well as control algorithms. The review examines various sensing modalities, including electromyography (EMG), force, displacement, and other innovative sensor types, employed in these devices to facilitate accurate and responsive motion control. Furthermore, the review explores the strengths and limitations of a diverse array of lower-limb rehabilitation-exoskeleton designs, highlighting areas of improvement and potential avenues for further development. In addition, the review investigates the latest control algorithms and analysis methods that have been utilized in conjunction with these sensor systems to optimize exoskeleton performance and ensure safe and effective user interactions. By building a deeper understanding of the diverse sensor technologies and monitoring systems, this review aims to contribute to the ongoing advancement of lower-limb rehabilitation exoskeletons, ultimately improving the quality of life for patients with mobility impairments

Using Surface-Motions for Locomotion of Microscopic Robots in Viscous Fluids

Microscopic robots could perform tasks with high spatial precision, such as acting in biological tissues on the scale of individual cells, provided they can reach precise locations. This paper evaluates the feasibility of in vivo locomotion for micron-size robots. Two appealing methods rely only on surface motions: steady tangential motion and small amplitude oscillations. These methods contrast with common microorganism propulsion based on flagella or cilia, which are more likely to damage nearby cells if used by robots made of stiff materials. The power potentially available to robots in tissue supports speeds ranging from one to hundreds of microns per second, over the range of viscosities found in biological tissue. We discuss design trade-offs among propulsion method, speed, power, shear forces and robot shape, and relate those choices to robot task requirements. This study shows that realizing such locomotion requires substantial improvements in fabrication capabilities and material properties over current technology.Comment: 14 figures and two Quicktime animations of the locomotion methods described in the paper, each showing one period of the motion over a time of 0.5 milliseconds; version 2 has minor clarifications and corrected typo

A Proposed Approach to Mechatronics Design and Implementation Education-Oriented Methodology

Mechatronics engineer is expected to design engineering systems with synergy and integration toward constrains like higher performance, speed, precision, efficiency, lower costs and functionality. The key element in success of a mechatronics engineering education-program, and correspondingly, Mechatronics engineering graduates, is directly related to a well-structured mechatronic system design course and the applied structural design methodology. Guidelines for structural design methodology and tools for the development process of mechatronic products, that can be applied in educational process is highly required. This paper proposes mechatronics systems design education-oriented methodology, which aims to integrate multidisciplinary knowledge, in various stages through the design process and development of mechatronics product. The proposed mechatronics design methodology is described, discussed and applied with the help of example student final year graduation project; design and implementation of mechatronics mobile robotic guidance system in the from of smart wheelchair- Mechatronics Motawif, to help and support people with disabilities and special needs to perform specific predetermined tasks, particularly, performing Al Omrah and motion around holy Kaba, Makka. Keywords: Mechatronics, Design methodology, Parallel design, Synergistic integration, Modeling/ Simulation, Prototyping, Mobile robot, Motawif

The low-level guidance of an experimental autonomous vehicle

This thesis describes the data processing and the control that constitutes a method of guidance for an autonomous guided vehicle (AGV) operating in a predefined and structured environment such as a warehouse or factory. A simple battery driven vehicle has been constructed which houses an MC68000 based microcomputer and a number of electronic interface cards. In order to provide a user interface, and in order to integrate the various aspects of the proposed guidance method, a modular software package has been developed. This, along with the research vehicle, has been used to support an experimental approach to the research. The vehicle's guidance method requires a series of concatenated curved and straight imaginary Unes to be passed to the vehicle as a representation of a planned path within its environment. Global position specifications for each line and the associated AGV direction and demand speed for each fine constitute commands which are queued and executed in sequence. In order to execute commands, the AGV is equipped with low level sensors (ultrasonic transducers and optical shaft encoders) which allow it to estimate and correct its global position continually. In addition to a queue of commands, the AGV also has a pre-programmed knowledge of the position of a number of correction boards within its environment. These are simply wooden boards approximately 25cm high and between 2 and 5 metres long with small protrusions ("notches") 4cm deep and 10cm long at regular (Im) intervals along its length. When the AGV passes such a correction board, it can measure its perpendicular distance and orientation relative to that board using two sets of its ultrasonic sensors, one set at the rear of the vehicle near to the drive wheels and one set at the front of the vehicle. Data collected as the vehicle moves parallel to a correction board is digitally filtered and subsequently a least squares line fitting procedure is adopted. As well as improving the reliability and accuracy of orientation and distance measurements relative to the board, this provides the basis for an algorithm with which to detect and measure the position of the protrusions on the correction board. Since measurements in three planar, local coordinates can be made (these are: x, the distance travelled parallel to a correction board; and y,the perpendicular distance relative to a correction board; and Ɵ, the clockwise planar orientation relative to the correction board), global position estimation can be corrected. When position corrections are made, it can be seen that they appear as step disturbances to the control system. This control system has been designed to allow the vehicle to move back onto its imaginary line after a position correction in a critically damped fashion and, in the steady state, to track both linear and curved command segments with minimum error

DESIGN OF AVIONICS AND CONTROLLERS FOR AUTONOMOUS TAKEOFF, HOVER AND LANDING OF A MINI-TANDEM HELICOPTER

Robotics autonomy is an active research area these days and promises very useful applications. A lot of research has been carried out on Vertical Takeoff and Landing (VTOL) vehicles especially single rotor small scale helicopters. This thesis focuses on a small scale twin rotor helicopter. These helicopters are more useful because of their power efficiency, scalability, long range of center of gravity, shorter blades and most importantly their "all lift" feature. By "all lift" we mean that unlike single rotor helicopters where tail rotor's power is wasted just to cancel the torque of the main rotor both of its rotors are used for generating lift. This makes twin rotors ideal for lifting heavy weights. This thesis considers avionics systems and the controllers development for a twin rotor. It involves electronic component selection and integration, software development, system identification and design of zero rate compensators. The compensators designed are responsible for autonomous take-off, hover and landing of this unmanned aerial vehicle (UAV). Both time and frequency domain system identification approaches were evaluated and a selection was made based on hardware limitations. A systematic approach is developed to demonstrate that a rapid prototyping UAV can be designed from cheap off-the-shelf components that are readily available and functionally compatible. At the end some modifications to existing mechanical structure are proposed for more robust outdoor hovering

Introduction to Control Engineering

This is an introductory level textbook for control engineering.https://digitalcommons.lsu.edu/etext/1000/thumbnail.jp

Implementation of Automatic DC Motor Braking PID Control System on (Disc Brakes)

The vital role of an automated braking system in ensuring the safety of motorized vehicles and their passengers cannot be overstated. It simplifies the braking process during driving, enhancing control and reducing the chances of accidents. This study is centered on the design of an automatic braking device for DC motors utilizing disc brakes. The instrument employed in this study was designed to accelerate the vehicle in two primary scenarios - before the collision with an obstacle and upon crossing the safety threshold. It achieves this by implementing the Proportional Integral Derivative (PID) control method. A significant part of this system comprises ultrasonic sensors, used for detecting the distance to obstructions, and rotary encoder sensors, which are utilized to measure the motor's rotational speed. These distance and speed readings serve as essential reference points for the braking process. The system is engineered to initiate braking when the distance value equals or falls below 60cm or when the speed surpasses 8000rpm. During such events, the disc brake is activated to reduce the motor's rotary motion. The suppression of the disc brake lever is executed pneumatically, informed by the sensor readings. Applying the PID method to the automatic braking system improved braking outcomes compared to a system without the PID method. This was proven by more effective braking results when the sensors detected specific distance and speed values. Numerous PID tuning tests achieved optimal results with K_p = 5, K_i = 1, and K_d = 3. These values can be integrated into automatic braking systems for improved performance. The PID method yielded more responsive braking outcomes when applied in distance testing. On the contrary, the braking results were largely unchanged in the absence of PID. Regarding speed testing, the PID method significantly improved the slowing down of the motor speed when it exceeded the maximum speed limit of 8000 rpm. This eliminates the possibility of sudden braking, thus maintaining the system within a safe threshold. The average time taken by the system to apply braking was 01.09 seconds, an indication of its quick responsiveness. This research is a valuable addition to control science, applying the PID control method to automatic DC motor braking. It provides valuable insights and concrete applications of PID control to complex mechatronic systems. It is also noteworthy for its development and optimization of suitable PID parameters to achieve responsive and stable braking. The study, therefore, offers a profound understanding of how PID control can be employed to manage braking systems on automatic DC motors, thereby advancing knowledge and application of control in control science and mechatronics