5,233 research outputs found
Flora robotica -- An Architectural System Combining Living Natural Plants and Distributed Robots
Key to our project flora robotica is the idea of creating a bio-hybrid system
of tightly coupled natural plants and distributed robots to grow architectural
artifacts and spaces. Our motivation with this ground research project is to
lay a principled foundation towards the design and implementation of living
architectural systems that provide functionalities beyond those of orthodox
building practice, such as self-repair, material accumulation and
self-organization. Plants and robots work together to create a living organism
that is inhabited by human beings. User-defined design objectives help to steer
the directional growth of the plants, but also the system's interactions with
its inhabitants determine locations where growth is prohibited or desired
(e.g., partitions, windows, occupiable space). We report our plant species
selection process and aspects of living architecture. A leitmotif of our
project is the rich concept of braiding: braids are produced by robots from
continuous material and serve as both scaffolds and initial architectural
artifacts before plants take over and grow the desired architecture. We use
light and hormones as attraction stimuli and far-red light as repelling
stimulus to influence the plants. Applied sensors range from simple proximity
sensing to detect the presence of plants to sophisticated sensing technology,
such as electrophysiology and measurements of sap flow. We conclude by
discussing our anticipated final demonstrator that integrates key features of
flora robotica, such as the continuous growth process of architectural
artifacts and self-repair of living architecture.Comment: 16 pages, 12 figure
Optimal mapping of joint faults into healthy joint velocity space for fault-tolerant redundant manipulators
redundant manipulator
Recommended from our members
Articular human joint modelling
Copyright @ Cambridge University Press 2009.The work reported in this paper encapsulates the theories and algorithms developed to drive the core analysis modules of the software which has been developed to model a musculoskeletal structure of anatomic joints. Due to local bone surface and contact geometry based joint kinematics, newly developed algorithms make the proposed modeller different from currently available modellers. There are many modellers that are capable of modelling gross human body motion. Nevertheless, none of the available modellers offer complete elements of joint modelling. It appears that joint modelling is an extension of their core analysis capability, which, in every case, appears to be musculoskeletal motion dynamics. It is felt that an analysis framework that is focused on human joints would have significant benefit and potential to be used in many orthopaedic applications. The local mobility of joints has a significant influence in human motion analysis, in understanding of joint loading, tissue behaviour and contact forces. However, in order to develop a bone surface based joint modeller, there are a number of major problems, from tissue idealizations to surface geometry discretization and non-linear motion analysis. This paper presents the following: (a) The physical deformation of biological tissues as linear or non-linear viscoelastic deformation, based on spring-dashpot elements. (b) The linear dynamic multibody modelling, where the linear formulation is established for small motions and is particularly useful for calculating the equilibrium position of the joint. This model can also be used for finding small motion behaviour or loading under static conditions. It also has the potential of quantifying the joint laxity. (c) The non-linear dynamic multibody modelling, where a non-matrix and algorithmic formulation is presented. The approach allows handling complex material and geometrical nonlinearity easily. (d) Shortest path algorithms for calculating soft tissue line of action geometries. The developed algorithms are based on calculating minimum ‘surface mass’ and ‘surface covariance’. An improved version of the ‘surface covariance’ algorithm is described as ‘residual covariance’. The resulting path is used to establish the direction of forces and moments acting on joints. This information is needed for linear or non-linear treatment of the joint motion. (e) The final contribution of the paper is the treatment of the collision. In the virtual world, the difficulty in analysing bodies in motion arises due to body interpenetrations. The collision algorithm proposed in the paper involves finding the shortest projected ray from one body to the other. The projection of the body is determined by the resultant forces acting on it due to soft tissue connections under tension. This enables the calculation of collision condition of non-convex objects accurately. After the initial collision detection, the analysis involves attaching special springs (stiffness only normal to the surfaces) at the ‘potentially colliding points’ and motion of bodies is recalculated. The collision algorithm incorporates the rotation as well as translation. The algorithm continues until the joint equilibrium is achieved. Finally, the results obtained based on the software are compared with experimental results obtained using cadaveric joints
Myoelectric forearm prostheses: State of the art from a user-centered perspective
User acceptance of myoelectric forearm prostheses is currently low. Awkward control, lack of feedback, and difficult training are cited as primary reasons. Recently, researchers have focused on exploiting the new possibilities offered by advancements in prosthetic technology. Alternatively, researchers could focus on prosthesis acceptance by developing functional requirements based on activities users are likely to perform. In this article, we describe the process of determining such requirements and then the application of these requirements to evaluating the state of the art in myoelectric forearm prosthesis research. As part of a needs assessment, a workshop was organized involving clinicians (representing end users), academics, and engineers. The resulting needs included an increased number of functions, lower reaction and execution times, and intuitiveness of both control and feedback systems. Reviewing the state of the art of research in the main prosthetic subsystems (electromyographic [EMG] sensing, control, and feedback) showed that modern research prototypes only partly fulfill the requirements. We found that focus should be on validating EMG-sensing results with patients, improving simultaneous control of wrist movements and grasps, deriving optimal parameters for force and position feedback, and taking into account the psychophysical aspects of feedback, such as intensity perception and spatial acuity
Dynamics of the Orthoglide parallel robot
Recursive matrix relations for kinematics and dynamics of the Orthoglide
parallel robot having three concurrent prismatic actuators are established in
this paper. These are arranged according to the Cartesian coordinate system
with fixed orientation, which means that the actuating directions are normal to
each other. Three identical legs connecting to the moving platform are located
on three planes being perpendicular to each other too. Knowing the position and
the translation motion of the platform, we develop the inverse kinematics
problem and determine the position, velocity and acceleration of each element
of the robot. Further, the principle of virtual work is used in the inverse
dynamic problem. Some matrix equations offer iterative expressions and graphs
for the input forces and the powers of the three actuators
Dynamic Modeling and Simulation of a Rotating Single Link Flexible Robotic Manipulator Subject to Quick Stops
Single link robotic manipulators are extensively used in industry and research operations. The main design requirement of such manipulators is to minimize link dynamic deflection and its active end vibrations, and obtain high position accuracy during its high speed motion. To achieve these requirements, accurate mathematical modeling and simulation of the initial design, to increase system stability and precision and to obtain very small amplitudes of vibration, should be considered. In this paper the modeling of such robotic arm with a rigid guide and a flexible extensible link subject to quick stops after each complete revolution is considered and its dynamical behavior analyzed. The extensible link which rotates with constant angular velocity has one end constrained to a predefined trajectory. The constrained trajectory allows trajectory control and obstacle avoidance for the active end of the robotic arm. The dynamic evolution of the system is investigated and the flexural response of the flexible link analyzed under the combined effect of clearance and flexibility.
Point trajectory planning of flexible redundant robot manipulators using genetic algorithms
The paper focuses on the problem of point-to-point trajectory planning for flexible redundant robot manipulators (FRM) in joint space. Compared with irredundant flexible manipulators, a FRM possesses additional possibilities during point-to-point trajectory planning due to its kinematics redundancy. A trajectory planning method to minimize vibration and/or executing time of a point-to-point motion is presented for FRMs based on Genetic Algorithms (GAs). Kinematics redundancy is integrated into the presented method as planning variables. Quadrinomial and quintic polynomial are used to describe the segments that connect the initial, intermediate, and final points in joint space. The trajectory planning of FRM is formulated as a problem of optimization with constraints. A planar FRM with three flexible links is used in simulation. Case studies show that the method is applicable
- …