Robotic Motion using Harmonic Functions and Finite Elements

The harmonic functions have proved to be a powerful technique for motion planning in a known environment. They have two important properties: given an initial point and an objective in a connected domain, a unique path exists between those points. This path is the maximum gradient path of the harmonic function that begins in the initial point and ends in the goal point. The second property is that the harmonic function cannot have local minima in the interior of the domain (the objective point is considered as a border). This paper proposes a new method to solve Laplace's equation. The harmonic function solution with mixed boundary conditions provides paths that verify the smoothness and safety considerations required for mobile robot path planning. The proposed approach uses the Finite Elements Method to solve Laplace's equation, and this allows us to deal with complicated shapes of obstacles and walls. Mixed boundary conditions are applied to the harmonic function to improve the quality of the trajectories. In this way, the trajectories are smooth, avoiding the corners of walls and obstacles, and the potential slope is not too small, avoiding the difficulty of the numerical calculus of the trajectory. Results show that this method is able to deal with moving obstacles, and even for non-holonomic vehicles. The proposed method can be generalized to 3D or more dimensions and it can be used to move robot manipulators

Modelling and identification of a six axes industrial robot

This paper deals with the modelling and identification of a six axes industrial St ¨aubli RX90 robot. A non-linear finite element method is used to generate the dynamic equations of motion in a form suitable for both simulation and identification. The latter requires that the equations of motion are linear in the inertia parameters. Joint friction is described by a friction model that describes the friction behaviour in the full velocity range necessary for identification. Experimental parameter identification by means of linear least squares techniques showed to be very suited for identification of the unknown parameters, provided that the problem is properly scaled and that the influence of disturbances is sufficiently analysed and managed. An analysis of the least squares problem by means of a singular value decomposition is preferred as it not only solves the problem of rank deficiency, but it also can correctly deal with measurement noise and unmodelled dynamics

Distributed cooperation of multiple robots under operational constraints via lean communication

Η αυτόνομη λειτουργία των ρομπότ εντός περίπλοκων χώρων εργασίας αποτελεί ένα επίκαιρο θέμα έρευνας και η αυτόνομη πλοήγηση είναι αναμφισβήτητα ένα θεμελιώδες κομμάτι αυτής. Επιπλέον, καθώς οι εργασίες που τα ρομπότ καλούνται να εκπληρώσουν αυξάνονται σε πολυπλοκότητα μέρα με τη μέρα, η χρήση πολύ-ρομποτικών συστημάτων, τα οποία εμφανίζουν γενικά υψηλότερη ευρωστία και ευελιξία, αυξάνεται προοδευτικά. Ως εκ τούτου, τα προβλήματα αυτόνομης πλοήγησης που πρέπει να επιλυθούν γίνονται όλο και πιο απαιτητικά, αυξάνοντας την ανάγκη για πιο αποτελεσματικά και σθεναρά σχήματα σχεδιασμού πορείας και κίνησης

Natural Motion for Energy Saving in Robotic and Mechatronic Systems

Energy saving in robotic and mechatronic systems is becoming an evermore important topic in both industry and academia. One strategy to reduce the energy consumption, especially for cyclic tasks, is exploiting natural motion. We define natural motion as the system response caused by the conversion of potential elastic energy into kinetic energy. This motion can be both a forced response assisted by a motor or a free response. The application of the natural motion concepts allows for energy saving in tasks characterized by repetitive or cyclic motion. This review paper proposes a classification of several approaches to natural motion, starting from the compliant elements and the actuators needed for its implementation. Then several approaches to natural motion are discussed based on the trajectory followed by the system, providing useful information to the researchers dealing with natural motion

A field programmable gate array based modular motion control platform

The expectations from motion control systems have been rising day by day. As the systems become more complex, conventional motion control systems can not achieve to meet all the specifications with optimized results. This creates the necessity of fundamental changes in the infrastructure of the system. Field programmable gate array (FPGA) technology enables the reconfiguration of the digital hardware, thus dissolving the necessity of infrastructural changes for minor manipulations in the hardware even if the system is deployed. An FPGA based hardware system shrinks the size of the hardware hence the cost. FPGAs also provide better power ratings for the systems as well as a more reliable system with improved performance. As a trade off, the development is rather more difficult than software based systems, which also affects the research and development time of the overall system. In this paper a level of abstraction is introduced in order to diminish the requirement of advanced hardware description language (HDL) knowledge for implementing motion control systems thoroughly on an FPGA. The intellectual property library consists of synthesizable hardware modules specifically implemented for motion control purposes. Other parts of a motion control system, like user interface and trajectory generation, are implemented as software functions in order to protect the modularity of the system. There are also several external hardware designs for interfacing and driving various types of actuators

Structural dynamics branch research and accomplishments for fiscal year 1987

This publication contains a collection of fiscal year 1987 research highlights from the Structural Dynamics Branch at NASA Lewis Research Center. Highlights from the branch's four major work areas, Aeroelasticity, Vibration Control, Dynamic Systems, and Computational Structural Methods, are included in the report as well as a complete listing of the FY87 branch publications

Nonlinear control for Two-Link flexible manipulator

Recently the use of robot manipulators has been increasing in many applications such as medical applications, automobile, construction, manufacturing, military, space, etc. However, current rigid manipulators have high inertia and use actuators with large energy consumption. Moreover, rigid manipulators are slow and have low payload-to arm-mass ratios because link deformation is not allowed. The main advantages of flexible manipulators over rigid manipulators are light in weight, higher speed of operation, larger workspace, smaller actuator, lower energy consumption and lower cost. However, there is no adequate closed-form solutions exist for flexible manipulators. This is mainly because flexible dynamics are modeled with partial differential equations, which give rise to infinite dimensional dynamical systems that are, in general, not possible to represent exactly or efficiently on a computer which makes modeling a challenging task. In addition, if flexibility nature wasn\u27t considered, there will be calculation errors in the calculated torque requirement for the motors and in the calculated position of the end-effecter. As for the control task, it is considered as a complex task since flexible manipulators are non-minimum phase system, under-actuated system and Multi-Input/Multi-Output (MIMO) nonlinear system. This thesis focuses on the development of dynamic formulation model and three control techniques aiming to achieve accurate position control and improving dynamic stability for Two-Link Flexible Manipulators (TLFMs). LQR controller is designed based on the linearized model of the TLFM; however, it is applied on both linearized and nonlinear models. In addition to LQR, Backstepping and Sliding mode controllers are designed as nonlinear control approaches and applied on both the nonlinear model of the TLFM and the physical system. The three developed control techniques are tested through simulation based on the developed dynamic formulation model using MATLAB/SIMULINK. Stability and performance analysis were conducted and tuned to obtain the best results. Then, the performance and stability results obtained through simulation are compared. Finally, the developed control techniques were implemented and analyzed on the 2-DOF Serial Flexible Link Robot experimental system from Quanser and the results are illustrated and compared with that obtained through simulation