ARITHMETIC LOGIC UNIT ARCHITECTURES WITH DYNAMICALLY DEFINED PRECISION

Modern central processing units (CPUs) employ arithmetic logic units (ALUs) that support statically defined precisions, often adhering to industry standards. Although CPU manufacturers highly optimize their ALUs, industry standard precisions embody accuracy and performance compromises for general purpose deployment. Hence, optimizing ALU precision holds great potential for improving speed and energy efficiency. Previous research on multiple precision ALUs focused on predefined, static precisions. Little previous work addressed ALU architectures with customized, dynamically defined precision. This dissertation presents approaches for developing dynamic precision ALU architectures for both fixed-point and floating-point to enable better performance, energy efficiency, and numeric accuracy. These new architectures enable dynamically defined precision, including support for vectorization. The new architectures also prevent performance and energy loss due to applying unnecessarily high precision on computations, which often happens with statically defined standard precisions. The new ALU architectures support different precisions through the use of configurable sub-blocks, with this dissertation including demonstration implementations for floating point adder, multiply, and fused multiply-add (FMA) circuits with 4-bit sub-blocks. For these circuits, the dynamic precision ALU speed is nearly the same as traditional ALU approaches, although the dynamic precision ALU is nearly twice as large

Decimal Floating-point Fused Multiply Add with Redundant Number Systems

The IEEE standard of decimal floating-point arithmetic was officially released in 2008. The new decimal floating-point (DFP) format and arithmetic can be applied to remedy the conversion error caused by representing decimal floating-point numbers in binary floating-point format and to improve the computing performance of the decimal processing in commercial and financial applications. Nowadays, many architectures and algorithms of individual arithmetic functions for decimal floating-point numbers are proposed and investigated (e.g., addition, multiplication, division, and square root). However, because of the less efficiency of representing decimal number in binary devices, the area consumption and performance of the DFP arithmetic units are not comparable with the binary counterparts. IBM proposed a binary fused multiply-add (FMA) function in the POWER series of processors in order to improve the performance of floating-point computations and to reduce the complexity of hardware design in reduced instruction set computing (RISC) systems. Such an instruction also has been approved to be suitable for efficiently implementing not only stand-alone addition and multiplication, but also division, square root, and other transcendental functions. Additionally, unconventional number systems including digit sets and encodings have displayed advantages on performance and area efficiency in many applications of computer arithmetic. In this research, by analyzing the typical binary floating-point FMA designs and the design strategy of unconventional number systems, ``a high performance decimal floating-point fused multiply-add (DFMA) with redundant internal encodings" was proposed. First, the fixed-point components inside the DFMA (i.e., addition and multiplication) were studied and investigated as the basis of the FMA architecture. The specific number systems were also applied to improve the basic decimal fixed-point arithmetic. The superiority of redundant number systems in stand-alone decimal fixed-point addition and multiplication has been proved by the synthesis results. Afterwards, a new DFMA architecture which exploits the specific redundant internal operands was proposed. Overall, the specific number system improved, not only the efficiency of the fixed-point addition and multiplication inside the FMA, but also the architecture and algorithms to build up the FMA itself. The functional division, square root, reciprocal, reciprocal square root, and many other functions, which exploit the Newton's or other similar methods, can benefit from the proposed DFMA architecture. With few necessary on-chip memory devices (e.g., Look-up tables) or even only software routines, these functions can be implemented on the basis of the hardwired FMA function. Therefore, the proposed DFMA can be implemented on chip solely as a key component to reduce the hardware cost. Additionally, our research on the decimal arithmetic with unconventional number systems expands the way of performing other high-performance decimal arithmetic (e.g., stand-alone division and square root) upon the basic binary devices (i.e., AND gate, OR gate, and binary full adder). The proposed techniques are also expected to be helpful to other non-binary based applications

A Study on Efficient Designs of Approximate Arithmetic Circuits

Approximate computing is a popular field where accuracy is traded with energy. It can benefit applications such as multimedia, mobile computing and machine learning which are inherently error resilient. Error introduced in these applications to a certain degree is beyond human perception. This flexibility can be exploited to design area, delay and power efficient architectures. However, care must be taken on how approximation compromises the correctness of results. This research work aims to provide approximate hardware architectures with error metrics and design metrics analyzed and their effects in image processing applications. Firstly, we study and propose unsigned array multipliers based on probability statistics and with approximate 4-2 compressors, full adders and half adders. This work deals with a new design approach for approximation of multipliers. The partial products of the multiplier are altered to introduce varying probability terms. Logic complexity of approximation is varied for the accumulation of altered partial products based on their probability. The proposed approximation is utilized in two variants of 16-bit multipliers. Synthesis results reveal that two proposed multipliers achieve power savings of 72% and 38% respectively compared to an exact multiplier. They have better precision when compared to existing approximate multipliers. Mean relative error distance (MRED) figures are as low as 7.6% and 0.02% for the proposed approximate multipliers, which are better than the previous state-of-the-art works. Performance of the proposed multipliers is evaluated with geometric mean filtering application, where one of the proposed models achieves the highest peak signal to noise ratio (PSNR). Second, approximation is proposed for signed Booth multiplication. Approximation is introduced in partial product generation and partial product accumulation circuits. In this work, three multipliers (ABM-M1, ABM-M2, and ABM-M3) are proposed in which the modified Booth algorithm is approximated. In all three designs, approximate Booth partial product generators are designed with different variations of approximation. The approximations are performed by reducing the logic complexity of the Booth partial product generator, and the accumulation of partial products is slightly modified to improve circuit performance. Compared to the exact Booth multiplier, ABM-M1 achieves up to 15% reduction in power consumption with an MRED value of 7.9 × 10-4. ABM-M2 has power savings of up to 60% with an MRED of 1.1 × 10-1. ABM-M3 has power savings of up to 50% with an MRED of 3.4 × 10-3. Compared to existing approximate Booth multipliers, the proposed multipliers ABM-M1 and ABM-M3 achieve up to a 41% reduction in power consumption while exhibiting very similar error metrics. Image multiplication and matrix multiplication are used as case studies to illustrate the high performance of the proposed approximate multipliers. Third, distributed arithmetic based sum of products units approximation is analyzed. Sum of products units are key elements in many digital signal processing applications. Three approximate sum of products models which are based on distributed arithmetic are proposed. They are designed for different levels of accuracy. First model of approximate sum of products achieves an improvement up to 64% on area and 70% on power, when compared to conventional unit. Other two models provide an improvement of 32% and 48% on area and 54% and 58% on power, respectively, with a reduced error rate compared to the first model. Third model achieves MRED and normalized mean error distance (NMED) as low as 0.05% and 0.009%. Performance of approximate units is evaluated with a noisy image smoothing application, where the proposed models are capable of achieving higher PSNR than existing state of the art techniques. Fourth, approximation is applied in division architecture. Two approximation models are proposed for restoring divider. In the first design, approximation is performed at circuit level, where approximate divider cells are utilized in place of exact ones by simplifying the logic equations. In the second model, restoring divider is analyzed strategically and number of restoring divider cells are reduced by finding the portions of divisor and dividend with significant information. An approximation factor $p$ is used in both designs. In model 1, the design with p=8 has a 58% reduction in both area and power consumption compared to exact design, with a Q-MRED of 1.909 × 10-2 and Q-NMED of 0.449 × 10-2. The second model with an approximation factor p=4 has 54% area savings and 62% power savings compared to exact design. The proposed models are found to have better error metrics compared to existing designs, with better performance at similar error values. A change detection image processing application is used for real time assessment of proposed and existing approximate dividers and one of the models achieves a PSNR of 54.27 dB

Fast decimal floating-point division

A new implementation for decimal floating-point (DFP) division is introduced. The algorithm is based on high-radix SRT division The SRT division algorithm is named after D. Sweeney, J. E. Robertson, and T. D. Tocher. with the recurrence in a new decimal signed-digit format. Quotient digits are selected using comparison multiples, where the magnitude of the quotient digit is calculated by comparing the truncated partial remainder with limited precision multiples of the divisor. The sign is determined concurrently by investigating the polarity of the truncated partial remainder. A timing evaluation using a logic synthesis shows a significant decrease in the division execution time in contrast with one of the fastest DFP dividers reported in the open literatureHooman Nikmehr, Braden Phillips and Cheng-Chew Li

Low-Power, Low-Cost, & High-Performance Digital Designs : Multi-bit Signed Multiplier design using 32nm CMOS Technology

Binary multipliers are ubiquitous in digital hardware. Digital multipliers along with the adders play a major role in computing, communicating, and controlling devices. Multipliers are used majorly in the areas of digital signal and image processing, central processing unit (CPU) of the computers, high-performance and parallel scientific computing, machine learning, physical layer design of the communication equipment, etc. The predominant presence and increasing demand for low-power, low-cost, and high-performance digital hardware led to this work of developing optimized multiplier designs. Two optimized designs are proposed in this work. One is an optimized 8 x 8 Booth multiplier architecture which is implemented using 32nm CMOS technology. Synthesis (pre-layout) and post-layout results show that the delay is reduced by 24.7% and 25.6% respectively, the area is reduced by 5.5% and 15% respectively, the power consumption is reduced by 21.5% and 26.6% respectively, and the area-delay-product is reduced by 28.8% and 36.8% respectively when compared to the performance results obtained for the state-of-the-art 8 x 8 Booth multiplier designed using 32nm CMOS technology with 1.05 V supply voltage at 500 MHz input frequency. Another is a novel radix-8 structure with 3-bit grouping to reduce the number of partial products along with the effective partial product reduction schemes for 8 x 8, 16 x 16, 32 x 32, and 64 x 64 signed multipliers. Comparing the performance results of the (synthesized, post-layout) designs of sizes 32 x 32, and 64 x 64 based on the simple novel radix-8 structure with the estimated performance measurements for the optimized Booth multiplier design presented in this work, reduction in delay by (2.64%, 0.47%) and (2.74%, 18.04%) respectively, and reduction in area-delay-product by (12.12%, -5.17%) and (17.82%, 12.91%) respectively can be observed. With the use of the higher radix structure, delay, area, and power consumption can be further reduced. Appropriate adder deployment, further exploring the optimized grouping or compression strategies, and applying more low-power design techniques such as power-gating, multi-Vt MOS transistor utilization, multi-VDD domain creation, etc., help, along with the higher radix structures, realizing the more efficient multiplier designs

Profile-directed specialisation of custom floating-point hardware

We present a methodology for generating floating-point arithmetic hardware designs which are, for suitable applications, much reduced in size, while still retaining performance and IEEE-754 compliance. Our system uses three key parts: a profiling tool, a set of customisable floating-point units and a selection of system integration methods. We use a profiling tool for floating-point behaviour to identify arithmetic operations where fundamental elements of IEEE-754 floating-point may be compromised, without generating erroneous results in the common case. In the uncommon case, we use simple detection logic to determine when operands lie outside the range of capabilities of the optimised hardware. Out-of-range operations are handled by a separate, fully capable, floatingpoint implementation, either on-chip or by returning calculations to a host processor. We present methods of system integration to achieve this errorcorrection. Thus the system suffers no compromise in IEEE-754 compliance, even when the synthesised hardware would generate erroneous results. In particular, we identify from input operands the shift amounts required for input operand alignment and post-operation normalisation. For operations where these are small, we synthesise hardware with reduced-size barrel-shifters. We also propose optimisations to take advantage of other profile-exposed behaviours, including removing the hardware required to swap operands in a floating-point adder or subtractor, and reducing the exponent range to fit observed values. We present profiling results for a range of applications, including a selection of computational science programs, Spec FP 95 benchmarks and the FFMPEG media processing tool, indicating which would be amenable to our method. Selected applications which demonstrate potential for optimisation are then taken through to a hardware implementation. We show up to a 45% decrease in hardware size for a floating-point datapath, with a correctable error-rate of less then 3%, even with non-profiled datasets

A high-speed integrated circuit with applications to RSA Cryptography

Merged with duplicate record 10026.1/833 on 01.02.2017 by CS (TIS)The rapid growth in the use of computers and networks in government, commercial and private communications systems has led to an increasing need for these systems to be secure against unauthorised access and eavesdropping. To this end, modern computer security systems employ public-key ciphers, of which probably the most well known is the RSA ciphersystem, to provide both secrecy and authentication facilities. The basic RSA cryptographic operation is a modular exponentiation where the modulus and exponent are integers typically greater than 500 bits long. Therefore, to obtain reasonable encryption rates using the RSA cipher requires that it be implemented in hardware. This thesis presents the design of a high-performance VLSI device, called the WHiSpER chip, that can perform the modular exponentiations required by the RSA cryptosystem for moduli and exponents up to 506 bits long. The design has an expected throughput in excess of 64kbit/s making it attractive for use both as a general RSA processor within the security function provider of a security system, and for direct use on moderate-speed public communication networks such as ISDN. The thesis investigates the low-level techniques used for implementing high-speed arithmetic hardware in general, and reviews the methods used by designers of existing modular multiplication/exponentiation circuits with respect to circuit speed and efficiency. A new modular multiplication algorithm, MMDDAMMM, based on Montgomery arithmetic, together with an efficient multiplier architecture, are proposed that remove the speed bottleneck of previous designs. Finally, the implementation of the new algorithm and architecture within the WHiSpER chip is detailed, along with a discussion of the application of the chip to ciphering and key generation

A Solder-Defined Computer Architecture for Backdoor and Malware Resistance

This research is about securing control of those devices we most depend on for integrity and confidentiality. An emerging concern is that complex integrated circuits may be subject to exploitable defects or backdoors, and measures for inspection and audit of these chips are neither supported nor scalable. One approach for providing a “supply chain firewall” may be to forgo such components, and instead to build central processing units (CPUs) and other complex logic from simple, generic parts. This work investigates the capability and speed ceiling when open-source hardware methodologies are fused with maker-scale assembly tools and visible-scale final inspection. The author has designed, and demonstrated in simulation, a 36-bit CPU and protected memory subsystem that use only synchronous static random access memory (SRAM) and trivial glue logic integrated circuits as components. The design presently lacks preemptive multitasking, ability to load firmware into the SRAMs used as logic elements, and input/output. Strategies are presented for adding these missing subsystems, again using only SRAM and trivial glue logic. A load-store architecture is employed with four clock cycles per instruction. Simulations indicate that a clock speed of at least 64 MHz is probable, corresponding to 16 million instructions per second (16 MIPS), despite the architecture containing no microprocessors, field programmable gate arrays, programmable logic devices, application specific integrated circuits, or other purchased complex logic. The lower speed, larger size, higher power consumption, and higher cost of an “SRAM minicomputer,” compared to traditional microcontrollers, may be offset by the fully open architecture—hardware and firmware—along with more rigorous user control, reliability, transparency, and auditability of the system. SRAM logic is also particularly well suited for building arithmetic logic units, and can implement complex operations such as population count, a hash function for associative arrays, or a pseudorandom number generator with good statistical properties in as few as eight clock cycles per 36-bit word processed. 36-bit unsigned multiplication can be implemented in software in 47 instructions or fewer (188 clock cycles). A general theory is developed for fast SRAM parallel multipliers should they be needed