5 research outputs found
Relaying in the Internet of Things (IoT): A Survey
The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions
A Comprehensive Overview on 5G-and-Beyond Networks with UAVs: From Communications to Sensing and Intelligence
Due to the advancements in cellular technologies and the dense deployment of
cellular infrastructure, integrating unmanned aerial vehicles (UAVs) into the
fifth-generation (5G) and beyond cellular networks is a promising solution to
achieve safe UAV operation as well as enabling diversified applications with
mission-specific payload data delivery. In particular, 5G networks need to
support three typical usage scenarios, namely, enhanced mobile broadband
(eMBB), ultra-reliable low-latency communications (URLLC), and massive
machine-type communications (mMTC). On the one hand, UAVs can be leveraged as
cost-effective aerial platforms to provide ground users with enhanced
communication services by exploiting their high cruising altitude and
controllable maneuverability in three-dimensional (3D) space. On the other
hand, providing such communication services simultaneously for both UAV and
ground users poses new challenges due to the need for ubiquitous 3D signal
coverage as well as the strong air-ground network interference. Besides the
requirement of high-performance wireless communications, the ability to support
effective and efficient sensing as well as network intelligence is also
essential for 5G-and-beyond 3D heterogeneous wireless networks with coexisting
aerial and ground users. In this paper, we provide a comprehensive overview of
the latest research efforts on integrating UAVs into cellular networks, with an
emphasis on how to exploit advanced techniques (e.g., intelligent reflecting
surface, short packet transmission, energy harvesting, joint communication and
radar sensing, and edge intelligence) to meet the diversified service
requirements of next-generation wireless systems. Moreover, we highlight
important directions for further investigation in future work.Comment: Accepted by IEEE JSA
Low-latency Networking: Where Latency Lurks and How to Tame It
While the current generation of mobile and fixed communication networks has
been standardized for mobile broadband services, the next generation is driven
by the vision of the Internet of Things and mission critical communication
services requiring latency in the order of milliseconds or sub-milliseconds.
However, these new stringent requirements have a large technical impact on the
design of all layers of the communication protocol stack. The cross layer
interactions are complex due to the multiple design principles and technologies
that contribute to the layers' design and fundamental performance limitations.
We will be able to develop low-latency networks only if we address the problem
of these complex interactions from the new point of view of sub-milliseconds
latency. In this article, we propose a holistic analysis and classification of
the main design principles and enabling technologies that will make it possible
to deploy low-latency wireless communication networks. We argue that these
design principles and enabling technologies must be carefully orchestrated to
meet the stringent requirements and to manage the inherent trade-offs between
low latency and traditional performance metrics. We also review currently
ongoing standardization activities in prominent standards associations, and
discuss open problems for future research
one6G white paper, 6G technology overview:Second Edition, November 2022
6G is supposed to address the demands for consumption of mobile networking services in 2030 and beyond. These are characterized by a variety of diverse, often conflicting requirements, from technical ones such as extremely high data rates, unprecedented scale of communicating devices, high coverage, low communicating latency, flexibility of extension, etc., to non-technical ones such as enabling sustainable growth of the society as a whole, e.g., through energy efficiency of deployed networks. On the one hand, 6G is expected to fulfil all these individual requirements, extending thus the limits set by the previous generations of mobile networks (e.g., ten times lower latencies, or hundred times higher data rates than in 5G). On the other hand, 6G should also enable use cases characterized by combinations of these requirements never seen before, e.g., both extremely high data rates and extremely low communication latency). In this white paper, we give an overview of the key enabling technologies that constitute the pillars for the evolution towards 6G. They include: terahertz frequencies (Section 1), 6G radio access (Section 2), next generation MIMO (Section 3), integrated sensing and communication (Section 4), distributed and federated artificial intelligence (Section 5), intelligent user plane (Section 6) and flexible programmable infrastructures (Section 7). For each enabling technology, we first give the background on how and why the technology is relevant to 6G, backed up by a number of relevant use cases. After that, we describe the technology in detail, outline the key problems and difficulties, and give a comprehensive overview of the state of the art in that technology. 6G is, however, not limited to these seven technologies. They merely present our current understanding of the technological environment in which 6G is being born. Future versions of this white paper may include other relevant technologies too, as well as discuss how these technologies can be glued together in a coherent system