212 research outputs found
Peak-to-Average-Power-Ratio (PAPR) Reduction Techniques for Orthogonal-Frequency-Division- Multiplexing (OFDM) Transmission
Wireless communication has experienced an incredible growth in the last decade. Two decades ago,the number of mobile subscribers was less than 1% of the world\u27s population. As of 2011, the number of mobile subscribers has increased tremendously to 79.86% of the world\u27s population.
Robust and high-rate data transmission in mobile environments faces severe problems due to the time-variant channel conditions, multipath fading and shadow fading. Fading is the main limitation on wireless communication channels. Frequency selective interference and fading, such as multipath fading, is a bandwidth bottleneck in the last mile which runs from the access point to the user. The last mile problem in wireless communication networks is caused by the environment of free space channels through which the signal propagates. Orthogonal Frequency Division Multiplexing (OFDM) is a promising modulation and multiplexing technique due to its robustness against multipath fading. Nevertheless, OFDM suffers from high Peak-to-Average- Power-Ratio (PAPR), which results in a complex OFDM signal.
In this research, reduction of PAPR considering the out-of-band radiation and the regeneration of the time-domain signal peaks caused by filtering has been studied and is presented. Our PAPR reduction was 30% of the Discrete Fourier Transform (DFT) with Interleaved Frequency Division Multiple Access (IFDMA) utilizing Quadrature Phase Shift Keying (QPSK) and varying the roll-off factor. We show that pulse shaping does not affect the PAPR of Localized Frequency Division Multiple Access (LFDMA) as much as it affects the PAPR of IFDMA. Therefore, IFDMA has an important trade-off relationship between excess bandwidth and PAPR performance, since excess bandwidth increases as the roll-off factor increases. In addition, we studied a low complexity clipping scheme, applicable to IFDMA uplink and OFDM downlink systems for PAPR reduction. We show that the performance of the PAPR of the Interleaved-FDMA scheme is better than traditional OFDMA for the uplink
transmission system. Our reduction of PAPR is 53% when IFDMA is used instead of OFDMA in the uplink direction. Furthermore, we also examined an important trade-off relationship between clipping distortion and quantization noise when the clipping scheme is used for OFDM downlink systems. Our results show a significant reduction in the PAPR and the out-of-band radiation caused by clipping for OFDM downlink transmission system
Multicarrier modulation with variable peak‐to‐average power ratio using partial fast Fourier transform
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/166180/1/cmu2bf01398.pd
A New Scheme For Reduction Of Peak-To-A Verage Power Ratio In Orthogonal Frequency Division Multiplexing
Orthogonal Frequency Division Multiplexing (OFDM) is an attractive
modulation method for channels with a non-flat frequency response. as it saves the need
for complex equalizers. However. its main disadvantage is the high peak-to-average
power ratio (PAPR) of the output signal. which may take values within a range that is
proportional to the number of carriers in the system. As a result, a linear behavior of the
system over a large dynamic range is needed and therefore the efficiency of the output
amplifier is reduced. Many methods have been proposed to reduce the PAPR of the
OFDM signal. among them a clipping technique which has been focused and
investigated.OFDM signal, among them a clipping technique which has been focused and
investigated.
This thesis proposes a new scheme to reduce the PAPR. We name it Off technique.
Further the effects of clipping scheme as well as the new scheme on the OFDM system
performance in terms of Bit Error Rate (BER) and PAPR reduction is investigated. The
results obtained indicate that both parameters, i .e. the reduction in PAPR and BER of
this scheme were worse than those of the Clipping Scheme. In conclusion, results
indicate that Off Technique does not offer a better solution to PAPR reduction in the
OFDM system
Energy Efficient Design of Extreme MIMO
Ever since the invention of Bell Laboratories Layer Space-Time (BLAST) in mid
1990s, the focus of MIMO research and development has been largely on pushing
the limit of spectral efficiency. While massive MIMO technologies laid the
foundation of high throughput in 5G and beyond, energy efficiency of the
associated radio system leaves much room for improvement. With the substantial
negative implications of climate change looming ever closer, enabling
sustainability is of paramount importance for any future technology, and
minimizing energy use is a key dimension of achieving sustainability. Thus,
every aspect of future extreme MIMO system design, implementation, and
operation will be scrutinized to maximize energy efficiency. An analysis of the
massive MIMO 5G radio energy consumption at different loads leads to
qualitative energy efficiency design goals for emerging extreme MIMO systems.
Following this, we focus on novel operational and component technology
innovations to minimize energy consumption.Comment: This work has been submitted to the IEEE for possible publication.
Copyright may be transferred without notice (Revised to focus on extreme
MIMO
Low Complex PAPR Reduction Schemes for OFDM Systems
In this thesis, three low-complex PAPR reduction schemes for OFDM systems are proposed. All the proposed schemes can be considered as modi ed versions of the conventional SLM scheme, which can signi cantly reduce high PAPR of OFDM signals with no distortion. In the rst proposed scheme, a new set of the candidate sequences is generated by partial phase weighting in the time domain and the combination of sub-blocks by applying IFFT properties. In the second scheme which is based on a combination of SLM and PTS, a simple phase optimization technique is introduced. The third scheme forms di erent 16-QAM signals from 2 QPSK signals. Also, the circular convolution part in TPPW-SLM, which is also a part of Class-III SLM, is applied
Peak To Average Power Ratio Reduction In Wireless Orthogonal Frequency Division Multiplexing
Orthogonal Frequency Division Multiplexing (OFDM) offers an attractive multicarrier technique with high spectral efficiency, simple implementation and robustness against multipath fading. A trend of OFDM development is to increase the number of subcarriers to enhance efficiency. However, when the number of subcarriers increases, certain time domain OFDM coefficients are likely to acquire excessively large magnitudes. As such, the OFDM baseband waveform is susceptible to high PAPR value and may suffer from non linear distortion at subsequent power amplifier stage. This high PAPR can limit the transmitter power efficiency, cause spectral spreading and reduce the bit-error-rate (BER) performance. To alleviate these potential performance problems, two novel computationally efficient and low cost PAPR reduction methods are proposed. The first method, called DCT-OFDM Method, seeks to apply alternative structure for transmitting the high speed data in the OFDM system. The character of the DCT energy focused is made use of in the frequency domain and it helps to reduce the PAPR engendered by IFFT at the transmitter statistically, avoiding the nonlinear distortion in OFDM systems due to great change of PAPR. It is mathematically verified that this method is potent to reduce PAPR. Simulation results show that about 2.2 dB reduction in PAPR value is achieved by this technique. Statistical Redistribution Method (SRM) which makes use of a non linear companding operation is selected and applied on the OFDM outputs signals has been used as a combination with Selected Mapping Method (SLM). The proposed scheme utilizes Selected Mapping (SLM) followed by the companding SRM technique to further reduce the PAPR of the OFDM signal. Simulation results indicate that about 5 dB reduction in PAPR is achieved compared with the conventional SLM algorithm
Peak-to-average power ratio reduction for DCO-OFDM underwater optical wireless communication system based on an interleaving technique
In underwater direct current-biased optical orthogonal frequency-division multiplexing (DCO-OFDM) system, high peak-to-average power ratio (PAPR) brings in-band distortion and out-of-band power. It also decreases the signal-to-quantization noise ratio of the analog-to-digital converter and the digital-to-analog converter. A time–frequency-domain interleaved subbanding scheme is proposed to reduce the PAPR of underwater DCO-OFDM system with low computation complexity and bit error rate (BER). The system BER is evaluated by the distances of the underwater optical wireless communication (UOWC), as well as by the signal attenuation of the UOWC channel. A least-square channel estimation method is adopted for adaptive power amplification at the receiver side, to further decrease the system BER
Satellite fixed communications service: A forecast of potential domestic demand through the year 2000. Volume 3: Appendices
Voice applications, data applications, video applications, impacted baseline forecasts, market distribution model, net long haul forecasts, trunking earth station definition and costs, trunking space segment cost, trunking entrance/exit links, trunking network costs and crossover distances with terrestrial tariffs, net addressable forecasts, capacity requirements, improving spectrum utilization, satellite system market development, and the 30/20 net accessible market are considered
An Overview of the ATSC 3.0 Physical Layer Specification
"(c) 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.")This paper provides an overview of the physical layer specification of Advanced Television Systems Committee (ATSC) 3.0, the next-generation digital terrestrial broadcasting standard. ATSC 3.0 does not have any backwards-compatibility constraint with existing ATSC standards, and it uses orthogonal frequency division multiplexing-based waveforms along with powerful low-density parity check (LDPC) forward error correction codes similar to existing state-of-the-art. However, it introduces many new technological features such as 2-D non-uniform constellations, improved and ultra-robust LDPC codes, power-based layered division multiplexing to efficiently provide mobile and fixed services in the same radio frequency (RF) channel, as well as a novel frequency pre-distortion multiple-input single-output antenna scheme. ATSC 3.0 also allows bonding of two RF channels to increase the service peak data rate and to exploit inter-RF channel frequency diversity, and to employ dual-polarized multiple-input multiple-output antenna system. Furthermore, ATSC 3.0 provides great flexibility in terms of configuration parameters (e.g., 12 coding rates, 6 modulation orders, 16 pilot patterns, 12 guard intervals, and 2 time interleavers), and also a very flexible data multiplexing scheme using time, frequency, and power dimensions. As a consequence, ATSC 3.0 not only improves the spectral efficiency and robustness well beyond the first generation ATSC broadcast television standard, but also it is positioned to become the reference terrestrial broadcasting technology worldwide due to its unprecedented performance and flexibility. Another key aspect of ATSC 3.0 is its extensible signaling, which will allow including new technologies in the future without disrupting ATSC 3.0 services. This paper provides an overview of the physical layer technologies of ATSC 3.0, covering the ATSC A/321 standard that describes the so-called bootstrap, which is the universal entry point to an ATSC 3.0 signal, and the ATSC A/322 standard that describes the physical layer downlink signals after the bootstrap. A summary comparison between ATSC 3.0 and DVB-T2 is also provided.Fay, L.; Michael, L.; Gómez Barquero, D.; Ammar, N.; Caldwell, MW. (2016). An Overview of the ATSC 3.0 Physical Layer Specification. IEEE Transactions on Broadcasting. 62(1):159-171. doi:10.1109/TBC.2015.2505417S15917162
Estudio de la métrica cúbica en sistemas multiportadora
En el estándar LTE, tradicionalmente se ha usado el parámetro PAPR para medir
la pérdida de eficiencia en el amplificador de potencia. Actualmente, se recomienda
el uso del parámetro denominado métrica cúbica (Cubic Metric, CM) para tal fin.
En trabajos previos se han utilizado técnicas de reducción de la CM, pero no se
ha tenido en cuenta la distorsión del amplificador ni se ha comprobado mediante un
cálculo de tasa de errores.
El objetivo de este trabajo es comparar ambos parámetros PAPR y CM dentro de
un sistema completo, teniendo en cuenta un amplificador y calculando la tasa de
errores.Traditionally, in LTE standard the parameter PAPR has been used to measure the
power amplifier efficiency loss. Using the named cubic metric (CM) parameter for this
purpose is recommended currently.
In previous research it has been used techniques to reduce the CM, but neither
amplifier distortion was taken into account nor a bit error rate verification.
The aim of this project is to compare both PAPR and CM parameters within a
complete system, taking into account an amplifier and the bit error rate.Grado en Ingeniería en Sistemas de Telecomunicació
- …