45,276 research outputs found
Photovoltaic sample-and-hold circuit enabling MPPT indoors for low-power systems
Photovoltaic (PV) energy harvesting is commonly used to power autonomous devices, and maximum power point tracking (MPPT) is often used to optimize its efficiency. This paper describes an ultra low-power MPPT circuit with a novel sample-and-hold and cold-start arrangement, enabling MPPT across the range of light intensities found indoors, which has not been reported before. The circuit has been validated in practice and found to cold-start and operate from 100 lux (typical of dim indoor lighting) up to 5000 lux with a 55cm2 amorphous silicon PV module. It is more efficient than non-MPPT circuits, which are the state-of-the-art for indoor PV systems. The proposed circuit maximizes the active time of the PV module by carrying out samples only once per minute. The MPPT control arrangement draws a quiescent current draw of only 8uA, and does not require an additional light sensor as has been required by previously-reported low-power MPPT circuits
Data Augmentation of Wearable Sensor Data for Parkinson's Disease Monitoring using Convolutional Neural Networks
While convolutional neural networks (CNNs) have been successfully applied to
many challenging classification applications, they typically require large
datasets for training. When the availability of labeled data is limited, data
augmentation is a critical preprocessing step for CNNs. However, data
augmentation for wearable sensor data has not been deeply investigated yet.
In this paper, various data augmentation methods for wearable sensor data are
proposed. The proposed methods and CNNs are applied to the classification of
the motor state of Parkinson's Disease patients, which is challenging due to
small dataset size, noisy labels, and large intra-class variability.
Appropriate augmentation improves the classification performance from 77.54\%
to 86.88\%.Comment: ICMI2017 (oral session
An evaluation of the spatial resolution of soil moisture information
Rainfall-amount patterns in the central regions of the U.S. were assessed. The spatial scales of surface features and their corresponding microwave responses in the mid western U.S. were investigated. The usefulness for U.S. government agencies of soil moisture information at scales of 10 km and 1 km. was ascertained. From an investigation of 494 storms, it was found that the rainfall resulting from the passage of most types of storms produces patterns which can be resolved on a 10 km scale. The land features causing the greatest problem in the sensing of soil moisture over large agricultural areas with a radiometer are bodies of water. Over the mid-western portions of the U.S., water occupies less than 2% of the total area, the consequently, the water bodies will not have a significant impact on the mapping of soil moisture. Over most of the areas, measurements at a 10-km resolution would adequately define the distribution of soil moisture. Crop yield models and hydrological models would give improved results if soil moisture information at scales of 10 km was available
Aerospace medicine and biology: A continuing bibliography with indexes (supplement 333)
This bibliography lists 122 reports, articles and other documents introduced into the NASA Scientific and Technical Information System during January, 1990. Subject coverage includes: aerospace medicine and psychology, life support systems and controlled environments, safety equipment, exobiology and extraterrestrial life, and flight crew behavior and performance
Review of sensors for remote patient monitoring
Remote patient monitoring (RPM) of physiological
measurements can provide an efficient method and high
quality care to patients. The physiological signals
measurement is the initial and the most important factor
in RPM. This paper discusses the characteristics of the
most popular sensors, which are used to obtain vital
clinical signals in prevalent RPM systems.
The sensors discussed in this paper are used to measure
ECG, heart sound, pulse rate, oxygen saturation, blood
pressure and respiration rate, which are treated as the
most important vital data in patient monitoring and
medical examination
Recommended from our members
Experimental Apparatus for the Study of micro Heat Exchangers with Inlet Temperatures between -200 and 200 °C and Elevated Pressures
This paper was presented at the 4th Micro and Nano Flows Conference (MNF2014), which was held at University College, London, UK. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute, ASME Press, LCN London Centre for Nanotechnology, UCL University College London, UCL Engineering, the International NanoScience Community, www.nanopaprika.eu.The current paper presents a test bench for micro-fabricated Recuperative Counter Flow Heat
Exchanger (RCFHE). The bench is suitable for up to 200 K difference between inlets temperatures and
operating pressures up to 32 MPa. The experimental setup allows controlling the physical state of the gas
(i.e. temperature, pressure and flow rate) at the RCFHE inlets. The bench has 5 controlled parameters and 5
more that are monitored and enables studying each of the hot and cold channels separately. We demonstrate
a steady supply of liquid nitrogen into the device for 10 minutes without thermal insulation of the specimen.
Another run is a steady state experiment with a temperature difference of about 20-30 K between inlets.
These show that the apparatus is capable of characterizing heat exchangers and serve as preliminary results
PHALANX: Expendable Projectile Sensor Networks for Planetary Exploration
Technologies enabling long-term, wide-ranging measurement in hard-to-reach areas are a critical need for planetary science inquiry. Phenomena of interest include flows or variations in volatiles, gas composition or concentration, particulate density, or even simply temperature. Improved measurement of these processes enables understanding of exotic geologies and distributions or correlating indicators of trapped water or biological activity. However, such data is often needed in unsafe areas such as caves, lava tubes, or steep ravines not easily reached by current spacecraft and planetary robots. To address this capability gap, we have developed miniaturized, expendable sensors which can be ballistically lobbed from a robotic rover or static lander - or even dropped during a flyover. These projectiles can perform sensing during flight and after anchoring to terrain features. By augmenting exploration systems with these sensors, we can extend situational awareness, perform long-duration monitoring, and reduce utilization of primary mobility resources, all of which are crucial in surface missions. We call the integrated payload that includes a cold gas launcher, smart projectiles, planning software, network discovery, and science sensing: PHALANX. In this paper, we introduce the mission architecture for PHALANX and describe an exploration concept that pairs projectile sensors with a rover mothership. Science use cases explored include reconnaissance using ballistic cameras, volatiles detection, and building timelapse maps of temperature and illumination conditions. Strategies to autonomously coordinate constellations of deployed sensors to self-discover and localize with peer ranging (i.e. a local GPS) are summarized, thus providing communications infrastructure beyond-line-of-sight (BLOS) of the rover. Capabilities were demonstrated through both simulation and physical testing with a terrestrial prototype. The approach to developing a terrestrial prototype is discussed, including design of the launching mechanism, projectile optimization, micro-electronics fabrication, and sensor selection. Results from early testing and characterization of commercial-off-the-shelf (COTS) components are reported. Nodes were subjected to successful burn-in tests over 48 hours at full logging duty cycle. Integrated field tests were conducted in the Roverscape, a half-acre planetary analog environment at NASA Ames, where we tested up to 10 sensor nodes simultaneously coordinating with an exploration rover. Ranging accuracy has been demonstrated to be within +/-10cm over 20m using commodity radios when compared to high-resolution laser scanner ground truthing. Evolution of the design, including progressive miniaturization of the electronics and iterated modifications of the enclosure housing for streamlining and optimized radio performance are described. Finally, lessons learned to date, gaps toward eventual flight mission implementation, and continuing future development plans are discussed
Enabling Micro-level Demand-Side Grid Flexiblity in Resource Constrained Environments
The increased penetration of uncertain and variable renewable energy presents
various resource and operational electric grid challenges. Micro-level
(household and small commercial) demand-side grid flexibility could be a
cost-effective strategy to integrate high penetrations of wind and solar
energy, but literature and field deployments exploring the necessary
information and communication technologies (ICTs) are scant. This paper
presents an exploratory framework for enabling information driven grid
flexibility through the Internet of Things (IoT), and a proof-of-concept
wireless sensor gateway (FlexBox) to collect the necessary parameters for
adequately monitoring and actuating the micro-level demand-side. In the summer
of 2015, thirty sensor gateways were deployed in the city of Managua
(Nicaragua) to develop a baseline for a near future small-scale demand response
pilot implementation. FlexBox field data has begun shedding light on
relationships between ambient temperature and load energy consumption, load and
building envelope energy efficiency challenges, latency communication network
challenges, and opportunities to engage existing demand-side user behavioral
patterns. Information driven grid flexibility strategies present great
opportunity to develop new technologies, system architectures, and
implementation approaches that can easily scale across regions, incomes, and
levels of development
- âŠ