17,632 research outputs found
Recommended from our members
Building thermal load prediction through shallow machine learning and deep learning
Building thermal load prediction informs the optimization of cooling plant and thermal energy storage. Physics-based prediction models of building thermal load are constrained by the model and input complexity. In this study, we developed 12 data-driven models (7 shallow learning, 2 deep learning, and 3 heuristic methods) to predict building thermal load and compared shallow machine learning and deep learning. The 12 prediction models were compared with the measured cooling demand. It was found XGBoost (Extreme Gradient Boost) and LSTM (Long Short Term Memory) provided the most accurate load prediction in the shallow and deep learning category, and both outperformed the best baseline model, which uses the previous day's data for prediction. Then, we discussed how the prediction horizon and input uncertainty would influence the load prediction accuracy. Major conclusions are twofold: first, LSTM performs well in short-term prediction (1 h ahead) but not in long term prediction (24 h ahead), because the sequential information becomes less relevant and accordingly not so useful when the prediction horizon is long. Second, the presence of weather forecast uncertainty deteriorates XGBoost's accuracy and favors LSTM, because the sequential information makes the model more robust to input uncertainty. Training the model with the uncertain rather than accurate weather data could enhance the model's robustness. Our findings have two implications for practice. First, LSTM is recommended for short-term load prediction given that weather forecast uncertainty is unavoidable. Second, XGBoost is recommended for long term prediction, and the model should be trained with the presence of input uncertainty
Recommended from our members
A novel improved model for building energy consumption prediction based on model integration
Building energy consumption prediction plays an irreplaceable role in energy planning, management, and conservation. Constantly improving the performance of prediction models is the key to ensuring the efficient operation of energy systems. Moreover, accuracy is no longer the only factor in revealing model performance, it is more important to evaluate the model from multiple perspectives, considering the characteristics of engineering applications. Based on the idea of model integration, this paper proposes a novel improved integration model (stacking model) that can be used to forecast building energy consumption. The stacking model combines advantages of various base prediction algorithms and forms them into “meta-features” to ensure that the final model can observe datasets from different spatial and structural angles. Two cases are used to demonstrate practical engineering applications of the stacking model. A comparative analysis is performed to evaluate the prediction performance of the stacking model in contrast with existing well-known prediction models including Random Forest, Gradient Boosted Decision Tree, Extreme Gradient Boosting, Support Vector Machine, and K-Nearest Neighbor. The results indicate that the stacking method achieves better performance than other models, regarding accuracy (improvement of 9.5%–31.6% for Case A and 16.2%–49.4% for Case B), generalization (improvement of 6.7%–29.5% for Case A and 7.1%-34.6% for Case B), and robustness (improvement of 1.5%–34.1% for Case A and 1.8%–19.3% for Case B). The proposed model enriches the diversity of algorithm libraries of empirical models
Building energy performance characterisation based on dynamic analysis and co-heating test
A demonstration zero-carbon neighborhood is being raised in the city of Kortrijk, Belgium in the framework of the ECO-Life project within the CONCERTO initiative. A holistic approach is applied to achieve the zero-carbon targets, considering all aspects that are relevant for energy supply. Accordingly, alongside the integration of renewable energy sources in the community, a low-temperature district heating system is being implemented to cover the heat demand. In this context, full scale testing of building thermal performances, by use of a co-heating test and flux measurements, can be useful to analyze the thermal performance of the building envelope in situ. For that reason, as part of a more general study regarding low-energy building, co-heating test, blower-door test and flux measurements in several apartments were executed. Therefore, the paper focuses on characterization of the thermal dynamic behavior of an apartment, as a first approximation of data analysis of a monitoring system involving whole buildings. In addition, in the present study, the capability of linear regression techniques to characterize the thermal behavior of a newly built low-energy apartment in Belgium is investigated. The strengths and weaknesses of different models are identified. The limitation and possibilities of regression models are evaluated in the face of their applicability as a simplified building equation model. The identified model structure is going to be used within a complex simulation model of an entire district heating system with around 200 dwelling. Finally, the potential of this kind of regression models to be used as part of the operational control scheme of a district heating system is presented
An Integrated Multi-Time-Scale Modeling for Solar Irradiance Forecasting Using Deep Learning
For short-term solar irradiance forecasting, the traditional point
forecasting methods are rendered less useful due to the non-stationary
characteristic of solar power. The amount of operating reserves required to
maintain reliable operation of the electric grid rises due to the variability
of solar energy. The higher the uncertainty in the generation, the greater the
operating-reserve requirements, which translates to an increased cost of
operation. In this research work, we propose a unified architecture for
multi-time-scale predictions for intra-day solar irradiance forecasting using
recurrent neural networks (RNN) and long-short-term memory networks (LSTMs).
This paper also lays out a framework for extending this modeling approach to
intra-hour forecasting horizons thus, making it a multi-time-horizon
forecasting approach, capable of predicting intra-hour as well as intra-day
solar irradiance. We develop an end-to-end pipeline to effectuate the proposed
architecture. The performance of the prediction model is tested and validated
by the methodical implementation. The robustness of the approach is
demonstrated with case studies conducted for geographically scattered sites
across the United States. The predictions demonstrate that our proposed unified
architecture-based approach is effective for multi-time-scale solar forecasts
and achieves a lower root-mean-square prediction error when benchmarked against
the best-performing methods documented in the literature that use separate
models for each time-scale during the day. Our proposed method results in a
71.5% reduction in the mean RMSE averaged across all the test sites compared to
the ML-based best-performing method reported in the literature. Additionally,
the proposed method enables multi-time-horizon forecasts with real-time inputs,
which have a significant potential for practical industry applications in the
evolving grid.Comment: 19 pages, 12 figures, 3 tables, under review for journal submissio
Collinsville solar thermal project: yield forecasting (final report)
Executive Summary
1 Introduction
This report’s primary aim is to provide yield projections for the proposed Linear Fresnel Reflector (LFR) technology plant at Collinsville, Queensland, Australia. However, the techniques developed in this report to overcome inadequate datasets at Collinsville to produce the yield projections are of interest to a wider audience because inadequate datasets for renewable energy projects are commonplace. Our subsequent report called ‘Energy economics and dispatch forecasting’ (Bell, Wild & Foster 2014a) uses the yield projections from this report to produce long-term wholesale market price and dispatch forecasts for the plant.
2 Literature review
The literature review discusses the four drivers for yield for LFR technology:
DNI (Direct Normal Irradiance)
Temperature
Humidity
Pressure
Collinsville lacks complete historical datasets of the four drivers to develop yield projections but its three nearby neighbours possess complete datasets, so could act as proxies for Collinsville. However, analysing the four drivers for Collinsville and its three nearby sites shows that there is considerable difference in their climates. This difference makes them unsuitable to act as proxies for yield calculations. Therefore, the review investigates modelling the four drivers for Collinsville.
We introduce the term “effective” DNI to help clarify and ameliorate concerns over the dust and dew effects on terrestrial DNI measurement and LFR technology.
We also introduce a modified Typical Metrological Year (TMY) technique to overcome technology specific TMYs. We discuss the effect of climate change and the El Niño Southern Oscillation (ENSO) on yield and their implications for a TMY.
2.1 Research questions
Research questions arising from the literature review include:
The overarching research question:
Can modelling the weather with limited datasets produce greater yield predictive power than using the historically more complete datasets from nearby sites?
This overarching question has a number of smaller supporting research questions:
Does BoM adequately adjust its DNI satellite dataset for cloud cover at Collinsville?
Given the dust and dew effects, is using raw satellite data sufficient to model yield?
Does elevation between Collinsville and nearby sites affect yield?
How does the ENSO cycle affect yield?
Given the 2007-12 electricity demand data constraint, will the 2007-13 based TMY provide a “Typical” year over the ENSO cycle?
How does climate change affect yield?
Is the method to use raw satellite DNI data to calculate yield and retrospectively adjusting the calculated yield with an effective to satellite DNI energy per area ratio suitable?
How has climate change affected the ENSO cycle?
A further research question arises in the methodology but is included here for completeness.
What is the expected frequency of oversupply from the Linear Fresnel Novatec Solar Boiler?
3 Methodology
In the methodology section, we discuss the data preparation and the model selection process for the four drivers of yield. We also discuss the development of the technology specific TMY and sensitivity analysis to address the research questions on climate change and elevation.
4 Results and analysis
In the results section we present the selection process for the four driver models. We also present the effective to satellite DNI ratio, the annual variation in gross yield, the selection of TMMs for the TMY based on monthly yield, the sensitivity analysis results on climate change and elevation, and the frequency of gross yield exceeding 30 MW.
5 Discussion
We analyse the results within a wider context, in particular, we make a comparison with the yield calculations for Rockhampton to address the overarching research question. We find that the modelling of weather at Collinsville using incomplete weather data has higher predictive performance that using the complete weather data at Rockhampton but recommend using the BoM’s one-minute solar data to improve the comparative test. Other findings include the requirement to increase the current TMM’s selection period 2007-13 to incorporate more of the ENSO cycle. There is less than 0.3% change in gross yield from the plant in the most likely case of climate change but there is a requirement to determine the effect of climate change on electricity demand and the ensuing change in wholesale electricity prices.
6 Conclusion
In this report, we have addressed the key research questions, produced the yield projections for our subsequent report ‘Energy economics and dispatch forecasting’ (Bell, Wild & Foster 2014a) and made recommendations for further research
Simulation of a model-based optimal controller for heating systems under realistic hypothesis
An optimal controller for auxiliary heating of passive solar buildings and commercial buildings with high internal gains is tested in simulation. Some of the most restrictive simplifications that were used in previous studies of that controller (Kummert et al., 2001) are lifted: the controller is applied to a multizone building, and a detailed model is used for the HVAC system. The model-based control algorithm is not modified. It is based on a simplified internal model
- …