Generic Connectivity-Based CGRA Mapping via Integer Linear Programming

Coarse-grained reconfigurable architectures (CGRAs) are programmable logic devices with large coarse-grained ALU-like logic blocks, and multi-bit datapath-style routing. CGRAs often have relatively restricted data routing networks, so they attract CAD mapping tools that use exact methods, such as Integer Linear Programming (ILP). However, tools that target general architectures must use large constraint systems to fully describe an architecture's flexibility, resulting in lengthy run-times. In this paper, we propose to derive connectivity information from an otherwise generic device model, and use this to create simpler ILPs, which we combine in an iterative schedule and retain most of the exactness of a fully-generic ILP approach. This new approach has a speed-up geometric mean of 5.88x when considering benchmarks that do not hit a time-limit of 7.5 hours on the fully-generic ILP, and 37.6x otherwise. This was measured using the set of benchmarks used to originally evaluate the fully-generic approach and several more benchmarks representing computation tasks, over three different CGRA architectures. All run-times of the new approach are less than 20 minutes, with 90th percentile time of 410 seconds. The proposed mapping techniques are integrated into, and evaluated using the open-source CGRA-ME architecture modelling and exploration framework.Comment: 8 pages of content; 8 figures; 3 tables; to appear in FCCM 2019; Uses the CGRA-ME framework at http://cgra-me.ece.utoronto.ca

Re-targetable tools and methodologies for the efficient deployment of high-level source code on coarse-grained dynamically reconfigurable architectures

Reconfigurable computing traditionally consists of a data path machine (such as an FPGA) acting as a co-processor to a conventional microprocessor. This involves partitioning the application such that the data path intensive parts are implemented on the reconfigurable fabric, and the control flow intensive parts are implemented on the microprocessor. Often the two parts have to be written in different languages. New highly parallel data path architectures allow parallelism approaching that of FPGAs, but are able to be reconfigured very rapidly. As a result, it is possible to use these architectures to perform control flow in a manner similar to a microprocessor, and thus a complete program can be described from an unmodified high-level language (in particular C). This overcomes the historical instruction-level parallelism (ILP) wall.To make full use of the available parallelism , existing microprocessor tool flows are insufficient. Data path machines are typically programmed via HDL tools from the ASIC design world. This expresses algorithm s at a low er level than the application algorithm s are typically developed in. The work in this thesis builds upon earlier work to allow applications to be described from high-level languages, by employing low-level optimisations in the compiler back-end and working from the assembly, to maximise parallel efficiency. This consists of scheduling, where known techniques are used to pack instructions into basic blocks that map well to the reconfigurable core (optimising spatial efficiency); then automatic pipelining is applied to dramatically improve the achievable throughput (optimising temporal efficiency). Together these can be thought of as “instruction-level parallelism done right”. Speed-ups of more than an order of magnitude were achieved, yielding throughputs of 180-380M Pixels/s on typical image signal processing tasks, matching the performance of hard-wired ASICs.Furthermore, conventional software-based simulation technologies for data path machines are too slow for use in application verification. This thesis demonstrates how a high-speed software emulator can be created for self-controlled dynamically reconfigurable data path machines, using a static serialisation of the data paths in each configuration context. This yields run-time performance several orders of magnitude higher than existing techniques, making it suitable for use in feedback-directed optimisation

Virtual Runtime Application Partitions for Resource Management in Massively Parallel Architectures

This thesis presents a novel design paradigm, called Virtual Runtime Application Partitions (VRAP), to judiciously utilize the on-chip resources. As the dark silicon era approaches, where the power considerations will allow only a fraction chip to be powered on, judicious resource management will become a key consideration in future designs. Most of the works on resource management treat only the physical components (i.e. computation, communication, and memory blocks) as resources and manipulate the component to application mapping to optimize various parameters (e.g. energy efficiency). To further enhance the optimization potential, in addition to the physical resources we propose to manipulate abstract resources (i.e. voltage/frequency operating point, the fault-tolerance strength, the degree of parallelism, and the configuration architecture). The proposed framework (i.e. VRAP) encapsulates methods, algorithms, and hardware blocks to provide each application with the abstract resources tailored to its needs. To test the efficacy of this concept, we have developed three distinct self adaptive environments: (i) Private Operating Environment (POE), (ii) Private Reliability Environment (PRE), and (iii) Private Configuration Environment (PCE) that collectively ensure that each application meets its deadlines using minimal platform resources. In this work several novel architectural enhancements, algorithms and policies are presented to realize the virtual runtime application partitions efficiently. Considering the future design trends, we have chosen Coarse Grained Reconfigurable Architectures (CGRAs) and Network on Chips (NoCs) to test the feasibility of our approach. Specifically, we have chosen Dynamically Reconfigurable Resource Array (DRRA) and McNoC as the representative CGRA and NoC platforms. The proposed techniques are compared and evaluated using a variety of quantitative experiments. Synthesis and simulation results demonstrate VRAP significantly enhances the energy and power efficiency compared to state of the art.Siirretty Doriast

A Reconfigurable Processor for Heterogeneous Multi-Core Architectures

A reconfigurable processor is a general-purpose processor coupled with an FPGA-like reconfigurable fabric. By deploying application-specific accelerators, performance for a wide range of applications can be improved with such a system. In this work concepts are designed for the use of reconfigurable processors in multi-tasking scenarios and as part of multi-core systems

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

Scalable Register File Architecture for CGRA Accelerators

abstract: Coarse-grained Reconfigurable Arrays (CGRAs) are promising accelerators capable of accelerating even non-parallel loops and loops with low trip-counts. One challenge in compiling for CGRAs is to manage both recurring and nonrecurring variables in the register file (RF) of the CGRA. Although prior works have managed recurring variables via rotating RF, they access the nonrecurring variables through either a global RF or from a constant memory. The former does not scale well, and the latter degrades the mapping quality. This work proposes a hardware-software codesign approach in order to manage all the variables in a local nonrotating RF. Hardware provides modulo addition based indexing mechanism to enable correct addressing of recurring variables in a nonrotating RF. The compiler determines the number of registers required for each recurring variable and configures the boundary between the registers used for recurring and nonrecurring variables. The compiler also pre-loads the read-only variables and constants into the local registers in the prologue of the schedule. Synthesis and place-and-route results of the previous and the proposed RF design show that proposed solution achieves 17% better cycle time. Experiments of mapping several important and performance-critical loops collected from MiBench show proposed approach improves performance (through better mapping) by 18%, compared to using constant memory.Dissertation/ThesisMasters Thesis Computer Science 201