Adaptive fuzzy pole placement for stabilization of non-linear systems

A new approach for pole placement of nonlinear systems using state feedback and fuzzy system is proposed. We use a new online fuzzy training method to identify and to obtain a fuzzy model for the unknown nonlinear system using only the system input and output. Then, we linearized this identified model at each sampling time to have an approximate linear time varying system. In order to stabilize the obtained linear system, we first choose the desired time invariant closed loop matrix and then a time varying state feedback is used. Then, the behavior of the closed loop nonlinear system will be as a linear time invariant (LTI) system. Therefore, the advantage of proposed method is global asymptotical exponential stability of unknown nonlinear system. Because of the high speed convergence of proposed adaptive fuzzy training method, the closed loop system is robust against uncertainty in system parameters. Finally the comparison has been done with the boundary layer sliding mode control (SMC)

Synthesis of nonseparable 3-D spatiotemporal bandpass filters on analog networks

Published versio

A functional link network based adaptive power system stabilizer

An on-line identifier using Functional Link Network (FLN) and Pole-shift (PS) controller for power system stabilizer (PSS) application are presented in this thesis. To have the satisfactory performance of the PSS controller, over a wide range of operating conditions, it is desirable to adapt PSS parameters in real time. Artificial Neural Networks (ANNs) transform the inputs in a low-dimensional space to high-dimensional nonlinear hidden unit space and they have the ability to model the nonlinear characteristics of the power system. The ability of ANNs to learn makes them more suitable for use in adaptive control techniques. On-line identification obtains a mathematical model at each sampling period to track the dynamic behavior of the plant. The ANN identifier consisting of a Functional link Network (FLN) is used for identifying the model parameters. A FLN model eliminates the need of hidden layer while retaining the nonlinear mapping capability of the neural network by using enhanced inputs. This network may be conveniently used for function approximation with faster convergence rate and lesser computational load. The most commonly used Pole Assignment (PA) algorithm for adaptive control purposes assign the pole locations to fixed locations within the unit circle in the z-plane. It may not be optimum for different operating conditions. In this thesis, PS type of adaptive control algorithm is used. This algorithm, instead of assigning the closed-loop poles to fixed locations within the unit circle in the z-plane, this algorithm assumes that the pole characteristic polynomial of the closed-loop system has the same form as the pole characteristic of the open-loop system and shifts the open-loop poles radially towards the centre of the unit circle in the z-plane by a shifting factor α according to some rules. In this control algorithm, no coefficients need to be tuned manually, so manual parameter tuning (which is a drawback in conventional power system stabilizer) is minimized. The PS control algorithm uses the on-line updated ARMA parameters to calculate the new closed-loop poles of the system that are always inside the unit circle in the z-plane. Simulation studies on a single-machine infinite bus and on a multi-machine power system for various operating condition changes, verify the effectiveness of the combined model of FLN identifier and PS control in damping the local and multi-mode oscillations occurring in the system. Simulation studies prove that the APSSs have significant benefits over conventional PSSs: performance improvement and no requirement for parameter tuning

Ultrasound based Silent Speech Interface using Deep Learning

Silent Speech Interface (SSI) is a technology able to synthesize speech in the absence of any acoustic signal. It can be useful in cases like laryngectomy patients, noisy environments or silent calls. This thesis explores the particular case of SSI using ultrasound images of the tongue as input signals. A 'direct synthesis' approach based on Deep Neural Networks and Mel-generalized cepstral coefficients is proposed. This document is an extension of Csapó et al. "DNN-based Ultrasound-to-Speech Conversion for a Silent Speech Interface". Several deep learning models, such as the basic Feed-forward Neural Networks, Convolutional Neural Networks and Recurrent Neural Networks are presented and discussed. A denoising pre-processing based on a Deep Convolutional Autoencoder has also been studied. A considerable number of experiments using a set of different deep learning architectures and an extensive hyperperameter optimization study have been realized. The different experiments have been testing and rating several objective and subjective quality measures. According to the experiments, an architecture based on a CNN and bidirectional LSTM layers has shown the best results in both objective and subjective terms.Silent Speech Interface (SSI) is a technology able to synthesize speech in the absence of any acoustic signal. It can be useful in cases like laryngectomy patients, noisy environments or silent calls. This thesis explores the particular case of SSI using ultrasound images of the tongue as input signals. A 'direct synthesis' approach based on Deep Neural Networks and Mel-generalized cepstral coefficients is proposed. This document is an extension of Csapó et al. "DNN-based Ultrasound-to-Speech Conversion for a Silent Speech Interface". Several deep learning models, such as the basic Feed-forward Neural Networks, Convolutional Neural Networks and Recurrent Neural Networks are presented and discussed. A denoising pre-processing based on a Deep Convolutional Autoencoder has also been studied. A considerable number of experiments using a set of different deep learning architectures and an extensive hyperperameter optimization study have been realized. The different experiments have been testing and rating several objective and subjective quality measures. According to the experiments, an architecture based on a CNN and bidirectional LSTM layers has shown the best results in both objective and subjective terms.Silent Speech Interface (SSI) és una tecnologia capaç de sintetitzar veu partint únicament de senyals no-acústiques. Pot tenir gran utilitat en casos com pacients de laringectomia, ambients sorollosos o trucades silencioses. Aquesta tèsis explora el cas particular de SSI utilitzant imatges de la llengua captades amb ultrasons com a senyals d'entrada. Es proposa un enfocament de 'síntesis directa' basat en Xarxes Neuronals Profundes i coeficients Mel-generalized cepstral. Aquest document és una extensió del treball de Csapó et al. "DNN-based Ultrasound-to-Speech Conversion for a Silent Speech Interface" . Diversos models de xarxes neuronals són presentats i discutits, com les bàsiques xarxes neuronals directes, xarxes neuronals convolucionals o xarxes neuronals recurrents. També s'ha estudiat un pre-processat reductor de soroll basat en un Autoencoder convolucional profund. S'ha portat a terme un nombre considerable d'experiments utilitzant diverses arquitectures de Deep Learning, així com un extens estudi d'optimització d'hyperparàmetres. Els diferents experiments han estat evaluar i qualificar a partir de diferentes mesures de qualitat objectives i subjectives. Els millors resultats, tant en termes objectius com subjectius, els ha presentat una arquitectura basada en una CNN i capes bidireccionals de LSTMs

Dynamic Performance Analysis of a Five-Phase PMSM Drive Using Model Reference Adaptive System and Enhanced Sliding Mode Observer

This paper aims to evaluate the dynamic performance of a five-phase PMSM drive using two different observers: sliding mode (SMO) and model reference adaptive system (MRAS). The design of the vector control for the drive is firstly introduced in details to visualize the proper selection of speed and current controllers’ gains, then the construction of the two observers are presented. The stability check for the two observers are also presented and analyzed, and finally the evaluation results are presented to visualize the features of each sensorless technique and identify the advantages and shortages as well. The obtained results reveal that the de-signed SMO exhibits better performance and enhanced robustness compared with the MRAS under different operating conditions. This fact is approved through the obtained results considering a mismatch in the values of stator resistance and stator inductance as well. Large deviation in the values of estimated speed and rotor position are observed under MRAS, and this is also accompanied with high speed and torque oscillations

Oracle-Guided Design and Analysis of Learning-Based Cyber-Physical Systems

We are in world where autonomous systems, such as self-driving cars, surgical robots, robotic manipulators are becoming a reality. Such systems are considered \textit{safety-critical} since they interact with humans on a regular basis. Hence, before such systems can be integrated into our day to day life, we need to guarantee their safety. Recent success in machine learning (ML) and artificial intelligence (AI) has led to an increase in their use in real world robotic systems. For example, complex perception modules in self-driving cars and deep reinforcement learning controllers in robotic manipulators. Although powerful, they introduce an additional level of complexity when it comes to the formal analysis of autonomous systems. In this thesis, such systems are designated as Learning-Based Cyber-Physical Systems~(LB-CPS). In this thesis, we take inspiration from the Oracle-Guided Inductive Synthesis~(OGIS) paradigm to develop frameworks which can aid in achieving formal guarantees in different stages of an autonomous system design and analysis pipeline. Furthermore, we show that to guarantee the safety of LB-CPS, the design (synthesis) and analysis (verification) must consider feedback from the other. We consider five important parts of the design and analysis process and show a strong coupling among them, namely (i) Robust Control Synthesis from High Level Safety Specifications; (ii) Diagnosis and Repair of Safety Requirements for Control Synthesis; (iii) Counter-example Guided Data Augmentation for training high-accuracy ML models; (iv) Simulation-Guided Falsification and Verification against Adversarial Environments; and (v) Bridging Model and Real-World Gap. Finally, we introduce a software toolkit \verifai{} for the design and analysis of AI based systems, which was developed to provide a common formal platform to implement design and analysis frameworks for LB-CPS

Trajectory prediction of moving objects by means of neural networks

Thesis (Master)--Izmir Institute of Technology, Computer Engineering, Izmir, 1997Includes bibliographical references (leaves: 103-105)Text in English; Abstract: Turkish and Englishviii, 105 leavesEstimating the three-dimensional motion of an object from a sequence of object positions and orientation is of significant importance in variety of applications in control and robotics. For instance, autonomous navigation, manipulation, servo, tracking, planning and surveillance needs prediction of motion parameters. Although "motion estimation" is an old problem (the formulations date back to the beginning of the century), only recently scientists have provided with the tools from nonlinear system estimation theory to solve this problem eural Networks are the ones which have recently been used in many nonlinear dynamic system parameter estimation context. The approximating ability of the neural network is used to identifY the relation between system variables and parameters of a dynamic system. The position, velocity and acceleration of the object are estimated by several neural networks using the II most recent measurements of the object coordinates as input to the system Several neural network topologies with different configurations are introduced and utilized in the solution of the problem. Training schemes for each configuration are given in detail. Simulation results for prediction of motion having different characteristics via different architectures with alternative configurations are presented comparatively

Design Optimization of Wind Energy Conversion Systems with Applications

Modern and larger horizontal-axis wind turbines with power capacity reaching 15 MW and rotors of more than 235-meter diameter are under continuous development for the merit of minimizing the unit cost of energy production (total annual cost/annual energy produced). Such valuable advances in this competitive source of clean energy have made numerous research contributions in developing wind industry technologies worldwide. This book provides important information on the optimum design of wind energy conversion systems (WECS) with a comprehensive and self-contained handling of design fundamentals of wind turbines. Section I deals with optimal production of energy, multi-disciplinary optimization of wind turbines, aerodynamic and structural dynamic optimization and aeroelasticity of the rotating blades. Section II considers operational monitoring, reliability and optimal control of wind turbine components