Bipedal walking trajectory energy minimization through a learned hip height trajectory

This thesis describes methods used to optimize energy consumption of an offine bipedal walking trajectories through hip height control. The experiments were carried out on a miniature humanoid robot within the simulation environment Webots. Zero Moment Point (ZMP) preview control methods were implemented in Matlab to produce a stable walking trajectory for the robot with a fixed hip height. The hip height trajectory was then developed using an observation based Q-learning method that consider both stability and energy consumption. Through the Q-learning methods there was approximately a 9% decrease in the average energy consumption. Additionally, an increase in stability was observed.M.S., Mechanical Engineering and Mechanics -- Drexel University, 201

From walking to running: robust and 3D humanoid gait generation via MPC

Humanoid robots are platforms that can succeed in tasks conceived for humans. From locomotion in unstructured environments, to driving cars, or working in industrial plants, these robots have a potential that is yet to be disclosed in systematic every-day-life applications. Such a perspective, however, is opposed by the need of solving complex engineering problems under the hardware and software point of view. In this thesis, we focus on the software side of the problem, and in particular on locomotion control. The operativity of a legged humanoid is subordinate to its capability of realizing a reliable locomotion. In many settings, perturbations may undermine the balance and make the robot fall. Moreover, complex and dynamic motions might be required by the context, as for instance it could be needed to start running or climbing stairs to achieve a certain location in the shortest time. We present gait generation schemes based on Model Predictive Control (MPC) that tackle both the problem of robustness and tridimensional dynamic motions. The proposed control schemes adopt the typical paradigm of centroidal MPC for reference motion generation, enforcing dynamic balance through the Zero Moment Point condition, plus a whole-body controller that maps the generated trajectories to joint commands. Each of the described predictive controllers also feature a so-called stability constraint, preventing the generation of diverging Center of Mass trajectories with respect to the Zero Moment Point. Robustness is addressed by modeling the humanoid as a Linear Inverted Pendulum and devising two types of strategies. For persistent perturbations, a way to use a disturbance observer and a technique for constraint tightening (to ensure robust constraint satisfaction) are presented. In the case of impulsive pushes instead, techniques for footstep and timing adaptation are introduced. The underlying approach is to interpret robustness as a MPC feasibility problem, thus aiming at ensuring the existence of a solution for the constrained optimization problem to be solved at each iteration in spite of the perturbations. This perspective allows to devise simple solutions to complex problems, favoring a reliable real-time implementation. For the tridimensional locomotion, on the other hand, the humanoid is modeled as a Variable Height Inverted Pendulum. Based on it, a two stage MPC is introduced with particular emphasis on the implementation of the stability constraint. The overall result is a gait generation scheme that allows the robot to overcome relatively complex environments constituted by a non-flat terrain, with also the capability of realizing running gaits. The proposed methods are validated in different settings: from conceptual simulations in Matlab to validations in the DART dynamic environment, up to experimental tests on the NAO and the OP3 platforms

A Stability-Estimator to Unify Humanoid Locomotion: Walking, Stair-Climbing and Ladder-Climbing

The field of Humanoid robotics research has often struggled to find a unique niche that is not better served by other forms of robot. Unlike more traditional industrials robots with a specific purpose, a humanoid robot is not necessarily optimized for any particular task, due to the complexity and balance issues of being bipedal. However, the versatility of a humanoid robot may be ideal for applications such as search and rescue. Disaster sites with chemical, biological, or radiation contamination mean that human rescue workers may face untenable risk. Using a humanoid robot in these dangerous circumstances could make emergency response faster and save human lives. Despite the many successes of existing mobile robots in search and rescue, stair and ladder climbing remains a challenging task due to their form. To execute ladder climbing motions effectively, a humanoid robot requires a reliable estimate of stability. Traditional methods such as Zero Moment Point are not applicable to vertical climbing, and do not account for force limits imposed on end-effectors. This dissertation implements a simple contact wrench space method using a linear combination of contact wrenches. Experiments in simulation showed ZMP equivalence on flat ground. Furthermore, the estimator was able to predict stability with four point contact on a vertical ladder. Finally, an extension of the presented method is proposed based on these findings to address the limitations of the linear combination.Ph.D., Mechanical Engineering and Mechanics -- Drexel University, 201

Optimization of Humanoid's Motions under Multiple Constraints in Vehicle-Handling Task

In this dissertation, an approach on whole body motion optimization is presented for humanoid vehicle-handling task. To achieve this goal, the author built a reinforcement-learning-agent based trajectory-optimization framework. The framework planned and optimized a guideline input trajectory with respect to various kinematic and dynamic constraints. A path planner module designed an initial suboptimal motion. Reinforcement learning was then implemented to optimize the trajectories with respect to time-varying constraints at the body and joint level. The cost functions in the body level calculated a robot's static balancing ability, collisions and validity of the end-effector movement. Quasi-static balancing and collisions were computed from kinematic models of the robot and the vehicle. Various costs such as joint angle and velocity limits were computed in the joint level. Energy consumption such as torque limit obedience was also checked at the joint level. Such physical limits of each joint ensured both spatial and temporal smoothness of the generated trajectories. Keeping overall structure of the framework, cost functions and learning algorithm were selected adaptively based on the requirements of given tasks. After the optimization process, experimental tests of the presented approach are demonstrated through simulations using a virtual robot model. Verification-and-validation process then confirmed the efficacy of the optimized trajectory approach using the robot's real physical platform. For both test and verification process, different types of robot and vehicle were used to prove potentials for extension of the trajectory-optimization framework.Ph.D., Mechanical Engineering and Mechanics -- Drexel University, 201

Climbing and Walking Robots

Nowadays robotics is one of the most dynamic fields of scientific researches. The shift of robotics researches from manufacturing to services applications is clear. During the last decades interest in studying climbing and walking robots has been increased. This increasing interest has been in many areas that most important ones of them are: mechanics, electronics, medical engineering, cybernetics, controls, and computers. Today’s climbing and walking robots are a combination of manipulative, perceptive, communicative, and cognitive abilities and they are capable of performing many tasks in industrial and non- industrial environments. Surveillance, planetary exploration, emergence rescue operations, reconnaissance, petrochemical applications, construction, entertainment, personal services, intervention in severe environments, transportation, medical and etc are some applications from a very diverse application fields of climbing and walking robots. By great progress in this area of robotics it is anticipated that next generation climbing and walking robots will enhance lives and will change the way the human works, thinks and makes decisions. This book presents the state of the art achievments, recent developments, applications and future challenges of climbing and walking robots. These are presented in 24 chapters by authors throughtot the world The book serves as a reference especially for the researchers who are interested in mobile robots. It also is useful for industrial engineers and graduate students in advanced study

Bio-Inspired Robotics

Modern robotic technologies have enabled robots to operate in a variety of unstructured and dynamically-changing environments, in addition to traditional structured environments. Robots have, thus, become an important element in our everyday lives. One key approach to develop such intelligent and autonomous robots is to draw inspiration from biological systems. Biological structure, mechanisms, and underlying principles have the potential to provide new ideas to support the improvement of conventional robotic designs and control. Such biological principles usually originate from animal or even plant models, for robots, which can sense, think, walk, swim, crawl, jump or even fly. Thus, it is believed that these bio-inspired methods are becoming increasingly important in the face of complex applications. Bio-inspired robotics is leading to the study of innovative structures and computing with sensory–motor coordination and learning to achieve intelligence, flexibility, stability, and adaptation for emergent robotic applications, such as manipulation, learning, and control. This Special Issue invites original papers of innovative ideas and concepts, new discoveries and improvements, and novel applications and business models relevant to the selected topics of ``Bio-Inspired Robotics''. Bio-Inspired Robotics is a broad topic and an ongoing expanding field. This Special Issue collates 30 papers that address some of the important challenges and opportunities in this broad and expanding field

Locomoção bípede adaptativa a partir de uma única demonstração usando primitivas de movimento

Doutoramento em Engenharia EletrotécnicaEste trabalho aborda o problema de capacidade de imitação da locomoção humana através da utilização de trajetórias de baixo nível codificadas com primitivas de movimento e utilizá-las para depois generalizar para novas situações, partindo apenas de uma demonstração única. Assim, nesta linha de pensamento, os principais objetivos deste trabalho são dois: o primeiro é analisar, extrair e codificar demonstrações efetuadas por um humano, obtidas por um sistema de captura de movimento de forma a modelar tarefas de locomoção bípede. Contudo, esta transferência não está limitada à simples reprodução desses movimentos, requerendo uma evolução das capacidades para adaptação a novas situações, assim como lidar com perturbações inesperadas. Assim, o segundo objetivo é o desenvolvimento e avaliação de uma estrutura de controlo com capacidade de modelação das ações, de tal forma que a demonstração única apreendida possa ser modificada para o robô se adaptar a diversas situações, tendo em conta a sua dinâmica e o ambiente onde está inserido. A ideia por detrás desta abordagem é resolver o problema da generalização a partir de uma demonstração única, combinando para isso duas estruturas básicas. A primeira consiste num sistema gerador de padrões baseado em primitivas de movimento utilizando sistemas dinâmicos (DS). Esta abordagem de codificação de movimentos possui propriedades desejáveis que a torna ideal para geração de trajetórias, tais como a possibilidade de modificar determinados parâmetros em tempo real, tais como a amplitude ou a frequência do ciclo do movimento e robustez a pequenas perturbações. A segunda estrutura, que está embebida na anterior, é composta por um conjunto de osciladores acoplados em fase que organizam as ações de unidades funcionais de forma coordenada. Mudanças em determinadas condições, como o instante de contacto ou impactos com o solo, levam a modelos com múltiplas fases. Assim, em vez de forçar o movimento do robô a situações pré-determinadas de forma temporal, o gerador de padrões de movimento proposto explora a transição entre diferentes fases que surgem da interação do robô com o ambiente, despoletadas por eventos sensoriais. A abordagem proposta é testada numa estrutura de simulação dinâmica, sendo que várias experiências são efetuadas para avaliar os métodos e o desempenho dos mesmos.This work addresses the problem of learning to imitate human locomotion actions through low-level trajectories encoded with motion primitives and generalizing them to new situations from a single demonstration. In this line of thought, the main objectives of this work are twofold: The first is to analyze, extract and encode human demonstrations taken from motion capture data in order to model biped locomotion tasks. However, transferring motion skills from humans to robots is not limited to the simple reproduction, but requires the evaluation of their ability to adapt to new situations, as well as to deal with unexpected disturbances. Therefore, the second objective is to develop and evaluate a control framework for action shaping such that the single-demonstration can be modulated to varying situations, taking into account the dynamics of the robot and its environment. The idea behind the approach is to address the problem of generalization from a single-demonstration by combining two basic structures. The first structure is a pattern generator system consisting of movement primitives learned and modelled by dynamical systems (DS). This encoding approach possesses desirable properties that make them well-suited for trajectory generation, namely the possibility to change parameters online such as the amplitude and the frequency of the limit cycle and the intrinsic robustness against small perturbations. The second structure, which is embedded in the previous one, consists of coupled phase oscillators that organize actions into functional coordinated units. The changing contact conditions plus the associated impacts with the ground lead to models with multiple phases. Instead of forcing the robot’s motion into a predefined fixed timing, the proposed pattern generator explores transition between phases that emerge from the interaction of the robot system with the environment, triggered by sensor-driven events. The proposed approach is tested in a dynamics simulation framework and several experiments are conducted to validate the methods and to assess the performance of a humanoid robot

Humanoid Robots

For many years, the human being has been trying, in all ways, to recreate the complex mechanisms that form the human body. Such task is extremely complicated and the results are not totally satisfactory. However, with increasing technological advances based on theoretical and experimental researches, man gets, in a way, to copy or to imitate some systems of the human body. These researches not only intended to create humanoid robots, great part of them constituting autonomous systems, but also, in some way, to offer a higher knowledge of the systems that form the human body, objectifying possible applications in the technology of rehabilitation of human beings, gathering in a whole studies related not only to Robotics, but also to Biomechanics, Biomimmetics, Cybernetics, among other areas. This book presents a series of researches inspired by this ideal, carried through by various researchers worldwide, looking for to analyze and to discuss diverse subjects related to humanoid robots. The presented contributions explore aspects about robotic hands, learning, language, vision and locomotion

Télé-opération Corps Complet de Robots Humanoïdes

This thesis aims to investigate systems and tools for teleoperating a humanoid robot. Robotteleoperation is crucial to send and control robots in environments that are dangerous or inaccessiblefor humans (e.g., disaster response scenarios, contaminated environments, or extraterrestrialsites). The term teleoperation most commonly refers to direct and continuous control of a robot.In this case, the human operator guides the motion of the robot with her/his own physical motionor through some physical input device. One of the main challenges is to control the robot in a waythat guarantees its dynamical balance while trying to follow the human references. In addition,the human operator needs some feedback about the state of the robot and its work site through remotesensors in order to comprehend the situation or feel physically present at the site, producingeffective robot behaviors. Complications arise when the communication network is non-ideal. Inthis case the commands from human to robot together with the feedback from robot to human canbe delayed. These delays can be very disturbing for the human operator, who cannot teleoperatetheir robot avatar in an effective way.Another crucial point to consider when setting up a teleoperation system is the large numberof parameters that have to be tuned to effectively control the teleoperated robots. Machinelearning approaches and stochastic optimizers can be used to automate the learning of some of theparameters.In this thesis, we proposed a teleoperation system that has been tested on the humanoid robotiCub. We used an inertial-technology-based motion capture suit as input device to control thehumanoid and a virtual reality headset connected to the robot cameras to get some visual feedback.We first translated the human movements into equivalent robot ones by developping a motionretargeting approach that achieves human-likeness while trying to ensure the feasibility of thetransferred motion. We then implemented a whole-body controller to enable the robot to trackthe retargeted human motion. The controller has been later optimized in simulation to achieve agood tracking of the whole-body reference movements, by recurring to a multi-objective stochasticoptimizer, which allowed us to find robust solutions working on the real robot in few trials.To teleoperate walking motions, we implemented a higher-level teleoperation mode in whichthe user can use a joystick to send reference commands to the robot. We integrated this setting inthe teleoperation system, which allows the user to switch between the two different modes.A major problem preventing the deployment of such systems in real applications is the presenceof communication delays between the human input and the feedback from the robot: evena few hundred milliseconds of delay can irremediably disturb the operator, let alone a few seconds.To overcome these delays, we introduced a system in which a humanoid robot executescommands before it actually receives them, so that the visual feedback appears to be synchronizedto the operator, whereas the robot executed the commands in the past. To do so, the robot continuouslypredicts future commands by querying a machine learning model that is trained on pasttrajectories and conditioned on the last received commands.Cette thèse vise à étudier des systèmes et des outils pour la télé-opération d’un robot humanoïde.La téléopération de robots est cruciale pour envoyer et contrôler les robots dans des environnementsdangereux ou inaccessibles pour les humains (par exemple, des scénarios d’interventionen cas de catastrophe, des environnements contaminés ou des sites extraterrestres). Le terme téléopérationdésigne le plus souvent le contrôle direct et continu d’un robot. Dans ce cas, l’opérateurhumain guide le mouvement du robot avec son propre mouvement physique ou via un dispositifde contrôle. L’un des principaux défis est de contrôler le robot de manière à garantir son équilibredynamique tout en essayant de suivre les références humaines. De plus, l’opérateur humain abesoin d’un retour d’information sur l’état du robot et de son site via des capteurs à distance afind’appréhender la situation ou de se sentir physiquement présent sur le site, produisant des comportementsde robot efficaces. Des complications surviennent lorsque le réseau de communicationn’est pas idéal. Dans ce cas, les commandes de l’homme au robot ainsi que la rétroaction du robotà l’homme peuvent être retardées. Ces délais peuvent être très gênants pour l’opérateur humain,qui ne peut pas télé-opérer efficacement son avatar robotique.Un autre point crucial à considérer lors de la mise en place d’un système de télé-opérationest le grand nombre de paramètres qui doivent être réglés pour contrôler efficacement les robotstélé-opérés. Des approches d’apprentissage automatique et des optimiseurs stochastiques peuventêtre utilisés pour automatiser l’apprentissage de certains paramètres.Dans cette thèse, nous avons proposé un système de télé-opération qui a été testé sur le robothumanoïde iCub. Nous avons utilisé une combinaison de capture de mouvement basée sur latechnologie inertielle comme périphérique de contrôle pour l’humanoïde et un casque de réalitévirtuelle connecté aux caméras du robot pour obtenir un retour visuel. Nous avons d’abord traduitles mouvements humains en mouvements robotiques équivalents en développant une approchede retargeting de mouvement qui atteint la ressemblance humaine tout en essayant d’assurer lafaisabilité du mouvement transféré. Nous avons ensuite implémenté un contrôleur du corps entierpour permettre au robot de suivre le mouvement humain reciblé. Le contrôleur a ensuite étéoptimisé en simulation pour obtenir un bon suivi des mouvements de référence du corps entier,en recourant à un optimiseur stochastique multi-objectifs, ce qui nous a permis de trouver dessolutions robustes fonctionnant sur le robot réel en quelques essais.Pour télé-opérer les mouvements de marche, nous avons implémenté un mode de télé-opérationde niveau supérieur dans lequel l’utilisateur peut utiliser un joystick pour envoyer des commandesde référence au robot. Nous avons intégré ce paramètre dans le système de télé-opération, ce quipermet à l’utilisateur de basculer entre les deux modes différents.Un problème majeur empêchant le déploiement de tels systèmes dans des applications réellesest la présence de retards de communication entre l’entrée humaine et le retour du robot: mêmequelques centaines de millisecondes de retard peuvent irrémédiablement perturber l’opérateur,encore plus quelques secondes. Pour surmonter ces retards, nous avons introduit un système danslequel un robot humanoïde exécute des commandes avant de les recevoir, de sorte que le retourvisuel semble être synchronisé avec l’opérateur, alors que le robot exécutait les commandes dansle passé. Pour ce faire, le robot prédit en permanence les commandes futures en interrogeant unmodèle d’apprentissage automatique formé sur les trajectoires passées et conditionné aux dernièrescommandes reçues

Climbing and Walking Robots

With the advancement of technology, new exciting approaches enable us to render mobile robotic systems more versatile, robust and cost-efficient. Some researchers combine climbing and walking techniques with a modular approach, a reconfigurable approach, or a swarm approach to realize novel prototypes as flexible mobile robotic platforms featuring all necessary locomotion capabilities. The purpose of this book is to provide an overview of the latest wide-range achievements in climbing and walking robotic technology to researchers, scientists, and engineers throughout the world. Different aspects including control simulation, locomotion realization, methodology, and system integration are presented from the scientific and from the technical point of view. This book consists of two main parts, one dealing with walking robots, the second with climbing robots. The content is also grouped by theoretical research and applicative realization. Every chapter offers a considerable amount of interesting and useful information