Energetic analysis of industrial robots for pick-and-place operations

none4restrictedF. Vidussi, P. Boscariol, L. Scalera, A. GasparettoVidussi, F.; Boscariol, P.; Scalera, L.; Gasparetto, A

Natural Motion for Energy Saving in Robotic and Mechatronic Systems

Energy saving in robotic and mechatronic systems is becoming an evermore important topic in both industry and academia. One strategy to reduce the energy consumption, especially for cyclic tasks, is exploiting natural motion. We define natural motion as the system response caused by the conversion of potential elastic energy into kinetic energy. This motion can be both a forced response assisted by a motor or a free response. The application of the natural motion concepts allows for energy saving in tasks characterized by repetitive or cyclic motion. This review paper proposes a classification of several approaches to natural motion, starting from the compliant elements and the actuators needed for its implementation. Then several approaches to natural motion are discussed based on the trajectory followed by the system, providing useful information to the researchers dealing with natural motion

Increasing energy efficiency of high-speed parallel robots by using variable stiffness springs and optimal motion generation

International audienceThe classical approach to decrease the energy consumption of high-speed robots is by lowering the moving elements mass in order to have a lightweight structure. Even if this allows reducing the energy consumed, the lightweight architecture affects the robot stiffness, worsening the accuracy of the mechanism. Recently, variable stiffness actuators (VSAs) have been used in order to reduce the energy consumption of high-speed pick-and-place robots. The idea is to smartly tune online the stiffness of VSA springs so that the robot is put in near a resonance mode, thus considerably decreasing the energy consumption during fast pseudo-periodic pick-and-place motions. However, the serial configuration of springs and motors in the VSA leads to uncontrolled robot deflections at high-speeds and, thus, to a poor positioning accuracy of its end-effector. In order to avoid these drawbacks and to increase the energy efficiency while ensuring the accuracy, this paper proposes the use of parallel arrangement of variable stiffness springs (VSS) and motors, combined with an energy-based optimal trajectory planner. The VSS are used as energy storage for carrying out the reduction of the energy consumption and their parallel configuration with the motors ensure the load balancing at high-speed without losing the accuracy of the robot. Simulations of the suggested approach on a five-bar mechanism are performed and show the increase on energy efficiency. 1 INTRODUCTION It is well-known that in industrial applications, such as high-speed pick-and-place operations, parallel robots are widely used [1, 2]. Repeatability and accuracy are typically the most important criteria to measure their performance. Nevertheless, the design trends to operate at high speeds are shifting to the design of robots with lightweight architectures [3] in order to decrease the energy consumed by the motors, and measure as well the robot performance based on its energy efficiency [4]. For slow motions, gravity-balancing techniques [5-8] have been proposed in order to compensate the input efforts required to move the links of a pick-and-place robot, and thus to avoid consuming energy. Even if these methods have shown their effectiveness at slow speeds, it is not the case for high-speed operations in which the inertial effects are preponderant. A first solution introduced the series elastic actuators (SEAs) [9] to cope with the energy storage issues. The SEAs are compliant actua-tors composed by a motor which is linked to a spring in series that serves as energy storage, and whose stiffness is set by the spring constant. SEAs were first used to absorb contact shocks and to reduce the peak forces due to the impacts in bipedal walking robots [10]. The limitation of the SEAs is that the stiffness is fixed and cannot be altered during motion, thus limiting the level of compliance to adapt for different tasks. Therefore, a recent second solution proposed the use of variable stiffness actuators (VSAs) [11-13] to handle with energy storage issues. VSAs co

Design and Preliminary Testing of a Magnetic Spring as an Energy-Storing System for Reduced Power Consumption of a Humanoid Arm

The increasing use of robots in the industry, the growing energy prices, and higher environmental awareness have driven research to find new solutions for reducing energy consumption. In additional, in most robotic tasks, energy is used to overcome the forces of gravity, but in a few industrial applications, the force of gravity is used as a source of energy. For this reason, the use of magnetic springs with actuators may reduce the energy consumption of robots performing trajectories due their high-hardness magnetic properties of energy storage. Accordingly, this paper proposes a magnetic spring configuration as an energy-storing system for a two DoF humanoid arm. Thus, an integration of the magnetic spring system in the robot is described. A control strategy is proposed to enable autonomous use. In this paper, the proposed device is modeled and analyzed with simulations as: mechanical energy consumption and kinetic energy rotational and multibody dynamics. Furthermore, a prototype was manufactured and validated experimentally. A preliminary test to check the interaction between the magnetic spring system with the mechanism and the trajectory performance was carried out. Finally, an energy consumption comparison with and without the magnetic spring is also presented

Overview of microgrippers and design of a micro-manipulation station based on a MMOC microgripper

International audienceThis paper deals with an overview of recent microgrippers. As the end-effectors of micromanipulation systems, microgrippers are crucial point of such systems for their efficiency and their reliability. The performances of current microgrippers are presented and offer a stroke extending from 50 m to approximately 2mm and a maximum forces varying from 0,1mN to 600 mN. Then, micromanipulation system based on a piezoelectric microgripper and a SCARA robot is presented

Design, evaluation, and control of nexus: a multiscale additive manufacturing platform with integrated 3D printing and robotic assembly.

Additive manufacturing (AM) technology is an emerging approach to creating three-dimensional (3D) objects and has seen numerous applications in medical implants, transportation, aerospace, energy, consumer products, etc. Compared with manufacturing by forming and machining, additive manufacturing techniques provide more rapid, economical, efficient, reliable, and complex manufacturing processes. However, additive manufacturing also has limitations on print strength and dimensional tolerance, while traditional additive manufacturing hardware platforms for 3D printing have limited flexibility. In particular, part geometry and materials are limited to most 3D printing hardware. In addition, for multiscale and complex products, samples must be printed, fabricated, and transferred among different additive manufacturing platforms in different locations, which leads to high cost, long process time, and low yield of products. This thesis investigates methods to design, evaluate, and control the NeXus, which is a novel custom robotic platform for multiscale additive manufacturing with integrated 3D printing and robotic assembly. NeXus can be used to prototype miniature devices and systems, such as wearable MEMS sensor fabrics, microrobots for wafer-scale microfactories, tactile robot skins, next generation energy storage (solar cells), nanostructure plasmonic devices, and biosensors. The NeXus has the flexibility to fixture, position, transport, and assemble components across a wide spectrum of length scales (Macro-Meso-Micro-Nano, 1m to 100nm) and provides unparalleled additive process capabilities such as 3D printing through both aerosol jetting and ultrasonic bonding and forming, thin-film photonic sintering, fiber loom weaving, and in-situ Micro-Electro-Mechanical System (MEMS) packaging and interconnect formation. The NeXus system has a footprint of around 4m x 3.5m x 2.4m (X-Y-Z) and includes two industrial robotic arms, precision positioners, multiple manipulation tools, and additive manufacturing processes and packaging capabilities. The design of the NeXus platform adopted the Lean Robotic Micromanufacturing (LRM) design principles and simulation tools to mitigate development risks. The NeXus has more than 50 degrees of freedom (DOF) from different instruments, precise evaluation of the custom robots and positioners is indispensable before employing them in complex and multiscale applications. The integration and control of multi-functional instruments is also a challenge in the NeXus system due to different communication protocols and compatibility. Thus, the NeXus system is controlled by National Instruments (NI) LabVIEW real-time operating system (RTOS) with NI PXI controller and a LabVIEW State Machine User Interface (SMUI) and was programmed considering the synchronization of various instruments and sequencing of additive manufacturing processes for different tasks. The operation sequences of each robot along with relevant tools must be organized in safe mode to avoid crashes and damage to tools during robots’ motions. This thesis also describes two demonstrators that are realized by the NeXus system in detail: skin tactile sensor arrays and electronic textiles. The fabrication process of the skin tactile sensor uses the automated manufacturing line in the NeXus with pattern design, precise calibration, synchronization of an Aerosol Jet printer, and a custom positioner. The fabrication process for electronic textiles is a combination of MEMS fabrication techniques in the cleanroom and the collaboration of multiple NeXus robots including two industrial robotic arms and a custom high-precision positioner for the deterministic alignment process

Process automation for analytical measurements providing high precise sample preparation in life science applications

Laboratories providing life science applications will gain on improved analysis´ efficiency and reliability by automating sample pretreatment. However, commercially available automated systems are especially suitable for the standardized MTP-format allowing for biological assays, whereas automating analytical sample pretreatment is still an unsolved challenge. Therefore, the purpose of this presentation is the design, the realization, and evaluation of an automated system that supplies multistep analytical sample pretreatment and high flexibility for easy upgrading and performance adaption

Kinematics and Robot Design II (KaRD2019) and III (KaRD2020)

This volume collects papers published in two Special Issues “Kinematics and Robot Design II, KaRD2019” (https://www.mdpi.com/journal/robotics/special_issues/KRD2019) and “Kinematics and Robot Design III, KaRD2020” (https://www.mdpi.com/journal/robotics/special_issues/KaRD2020), which are the second and third issues of the KaRD Special Issue series hosted by the open access journal robotics.The KaRD series is an open environment where researchers present their works and discuss all topics focused on the many aspects that involve kinematics in the design of robotic/automatic systems. It aims at being an established reference for researchers in the field as other serial international conferences/publications are. Even though the KaRD series publishes one Special Issue per year, all the received papers are peer-reviewed as soon as they are submitted and, if accepted, they are immediately published in MDPI Robotics. Kinematics is so intimately related to the design of robotic/automatic systems that the admitted topics of the KaRD series practically cover all the subjects normally present in well-established international conferences on “mechanisms and robotics”.KaRD2019 together with KaRD2020 received 22 papers and, after the peer-review process, accepted only 17 papers. The accepted papers cover problems related to theoretical/computational kinematics, to biomedical engineering and to other design/applicative aspects

Parameter identification and model based control of direct drive robots

Imperial Users onl

International Workshop on MicroFactories (IWMF 2012): 17th-20th June 2012 Tampere Hall Tampere, Finland

This Workshop provides a forum for researchers and practitioners in industry working on the diverse issues of micro and desktop factories, as well as technologies and processes applicable for micro and desktop factories. Micro and desktop factories decrease the need of factory floor space, and reduce energy consumption and improve material and resource utilization thus strongly supporting the new sustainable manufacturing paradigm. They can be seen also as a proper solution to point-of-need manufacturing of customized and personalized products near the point of need