Recalibration and Validation of the SMAP L-Band Radiometer

SMAP mission was launched on 31st January 2015 in a 6 AM 6 PM sun-synchronous orbit at 685 km altitude to measure soil moisture and freethaw globally. The passive instrument of SMAP is a fully polarimetric L-band radiometer (1.4GHz) operating with a bandwidth of 24MHz. The radiometer L1B data product version 3 has been released for public science activities. Post-launch calibration and validation activities are described in [4,5]. Validation results show that SMAP antenna temperature (TA) is 2.6 K warmer over galactic Cold Sky (CS), and land TB is 2.6 K colder comparing to SMOS land TB (compared at the top of the atmosphere) after the update of the reflectors thermal model. Due to the biases, the SMAP radiometer is under re-calibration for next data release in 2018.We present the updated calibration approaches for the SMAP radiometer product. We will discuss the various radiometer calibration parameters and part of the validation process and result

SMAP Mission Status and Plan

The prime mission phase of National Aeronautics Space Administration's (NASA's) Soil Moisture Active Passive (SMAP) project was successfully completed in June 2018. The extended phase has been approved by NASA for operation through 2021 (with option to 2023). SMAP data have been well calibrated and have enabled diverse scientific investigations in water, energy and carbon cycle research, terrestrial ecology and ocean science. This paper will provide the highlights of algorithm updates to radiometric calibration and soil moisture retrieval algorithms. A summary of extended phase activities, in particular the SMAPVEX19 campaign, for product enhancements will be provided

Improved Hydrological Simulation Using SMAP Data: Relative Impacts of Model Calibration and Data Assimilation

The assimilation of remotely sensed soil moisture information into a land surface model has been shown in past studies to contribute accuracy to the simulated hydrological variables. Remotely sensed data, however, can also be used to improve the model itself through the calibration of the model's parameters, and this can also increase the accuracy of model products. Here, data provided by the Soil Moisture Active/Passive (SMAP) satellite mission are applied to the land surface component of the NASA GEOS Earth system model using both data assimilation and model calibration in order to quantify the relative degrees to which each strategy improves the estimation of near-surface soil moisture and streamflow. The two approaches show significant complementarity in their ability to extract useful information from the SMAP data record. Data assimilation reduces the ubRMSE (the RMSE after removing the long-term bias) of soil moisture estimates and improves the timing of streamflow variations, whereas model calibration reduces the model biases in both soil moisture and streamflow. While both approaches lead to an improved timing of simulated soil moisture, these contributions are largely independent; joint use of both approaches provides the highest soil moisture simulation accuracy

Estimating Live Fuel Moisture Using SMAP L-Band Radiometer Soil Moisture for Southern California, USA

Live fuel moisture (LFM) is a field-measured indicator of vegetation water content and a crucial observation of vegetation flammability. This study presents a new multi-variant regression model to estimate LFM in the Mediterranean ecosystem of Southern California, USA, using the Soil Moisture Active Passive (SMAP) L-band radiometer soil moisture (SMAP SM) from April 2015 to December 2018 over 12 chamise (Adenostoma fasciculatum) LFM sites. The two-month lag between SMAP SM and LFM was utilized either as steps to synchronize the SMAP SM to the LFM series or as the leading time window to calculate the accumulative SMAP SM. Cumulative growing degree days (CGDDs) were also employed to address the impact from heat. Models were constructed separately for the green-up and brown-down periods. An inverse exponential weight function was applied in the calculation of accumulative SMAP SM to address the different contribution to the LFM between the earlier and present SMAP SM. The model using the weighted accumulative SMAP SM and CGDDs yielded the best results and outperformed the reference model using the Moderate Resolution Imaging Spectroradiometer (MODIS) Visible Atmospherically Resistance Index. Our study provides a new way to empirically estimate the LFM in chaparral areas and extends the application of SMAP SM in the study of wildfire risk

Global Assessment of the SMAP Level-4 Soil Moisture Product Using Assimilation Diagnostics

The Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product provides 3-hourly, 9-km resolution, global estimates of surface (0-5 cm) and root-zone (0-100 cm) soil moisture and related land surface variables from 31 March 2015 to present with approx. 2.5-day latency. The ensemble-based L4_SM algorithm assimilates SMAP brightness temperature (Tb) observations into the Catchment land surface model. This study describes the spatially distributed L4_SM analysis and assesses the observation-minus-forecast (O-F) Tb residuals and the soil moisture and temperature analysis increments. Owing to the climatological rescaling of the Tb observations prior to assimilation, the analysis is essentially unbiased, with global mean values of approx. 0.37 K for the O-F Tb residuals and practically zero for the soil moisture and temperature increments. There are, however, modest regional (absolute) biases in the O-F residuals (under approx. 3 K), the soil moisture increments (under approx. 0.01 cu m/cu m), and the surface soil temperature increments (under approx. 1 K). Typical instantaneous values are approx. 6 K for O-F residuals, approx. 0.01 (approx. 0.003) cu m/cu m for surface (root-zone) soil moisture increments, and approx. 0.6 K for surface soil temperature increments. The O-F diagnostics indicate that the actual errors in the system are overestimated in deserts and densely vegetated regions and underestimated in agricultural regions and transition zones between dry and wet climates. The O-F auto-correlations suggest that the SMAP observations are used efficiently in western North America, the Sahel, and Australia, but not in many forested regions and the high northern latitudes. A case study in Australia demonstrates that assimilating SMAP observations successfully corrects short-term errors in the L4_SM rainfall forcing

Version 3 of the SMAP Level 4 Soil Moisture Product

The NASA Soil Moisture Active Passive (SMAP) Level 4 Soil Moisture (L4_SM) product provides 3-hourly, 9-km resolution, global estimates of surface (0-5 cm) and root zone (0-100 cm) soil moisture as well as related land surface states and fluxes from 31 March 2015 to present with a latency of 2.5 days. The ensemble-based L4_SM algorithm is a variant of the Goddard Earth Observing System version 5 (GEOS-5) land data assimilation system and ingests SMAP L-band (1.4 GHz) Level 1 brightness temperature observations into the Catchment land surface model. The soil moisture analysis is non-local (spatially distributed), performs downscaling from the 36-km resolution of the observations to that of the model, and respects the relative uncertainties of the modeled and observed brightness temperatures. Prior to assimilation, a climatological rescaling is applied to the assimilated brightness temperatures using a 6 year record of SMOS observations. A new feature in Version 3 of the L4_SM data product is the use of 2 years of SMAP observations for rescaling where SMOS observations are not available because of radio frequency interference, which expands the impact of SMAP observations on the L4_SM estimates into large regions of northern Africa and Asia. This presentation investigates the performance and data assimilation diagnostics of the Version 3 L4_SM data product. The L4_SM soil moisture estimates meet the 0.04 m3m3 (unbiased) RMSE requirement. We further demonstrate that there is little bias in the soil moisture analysis. Finally, we illustrate where the assimilation system overestimates or underestimates the actual errors in the system

Using Data Assimilation Diagnostics to Assess the SMAP Level-4 Soil Moisture Product

The Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product provides 3-hourly, 9-km resolution, global estimates of surface (0-5 cm) and root-zone (0-100 cm) soil moisture and related land surface variables from 31 March 2015 to present with approx.2.5-day latency. The ensemble-based L4_SM algorithm assimilates SMAP brightness temperature (Tb) observations into the Catchment land surface model. This study describes the spatially distributed L4_SM analysis and assesses the observation-minus-forecast (O-F) Tb residuals and the soil moisture and temperature analysis increments. Owing to the climatological rescaling of the Tb observations prior to assimilation, the analysis is essentially unbiased, with global mean values of approx. 0.37 K for the O-F Tb residuals and practically zero for the soil moisture and temperature increments. There are, however, modest regional (absolute) biases in the O-F residuals (under approx. 3 K), the soil moisture increments (under approx. 0.01 cu m/cu m), and the surface soil temperature increments (under approx. 1 K). Typical instantaneous values are approx. 6 K for O-F residuals, approx. 0.01 (approx. 0.003) cu m/cu m for surface (root-zone) soil moisture increments, and approx. 0.6 K for surface soil temperature increments. The O-F diagnostics indicate that the actual errors in the system are overestimated in deserts and densely vegetated regions and underestimated in agricultural regions and transition zones between dry and wet climates. The O-F auto-correlations suggest that the SMAP observations are used efficiently in western North America, the Sahel, and Australia, but not in many forested regions and the high northern latitudes. A case study in Australia demonstrates that assimilating SMAP observations successfully corrects short-term errors in the L4_SM rainfall forcing

Using Satellite Observations of Soil Moisture to Improve Modeling of Terrestrial Water Cycles

Terrestrial evapotranspiration (ET) describes the flux of water from the Earth’s surface to the atmosphere, calculated as the sum of evaporation from soil and leaf surfaces, and transpiration through plant stomata. ET is the largest terrestrial water flux, returning over half of the precipitation that falls on land back to the atmosphere, annually. Additionally, ET plays a key role in Earth’s carbon, water, and energy cycles, linking them together via the movement of water and CO2 through plant stomata. Because of its important role in these Earth system processes, it is essential that existing methods of measuring and modeling ET are accurate. A common method for estimating and monitoring ET at global scales is through satellite remote sensing. The remote sensing-based models use a combination of satellite observed vegetation and surface meteorology to estimate ET. Although these models can be effective at representing global patterns of ET, a common shortfall is that few use soil moisture as a direct model input. The lack of soil moisture information in these models can significantly degrade ET estimates, as soil moisture is tightly linked to both soil evaporation and plant transpiration. This thesis addresses this gap by introducing a satellite observed soil moisture control to an existing operational remote sensing-based ET model, MOD16. The results show that introducing a soil moisture control to MOD16 improves estimates of ET across a wide range of climates and vegetation types within the contiguous United States study area. This research provides an improved regional representation of ET and clarifies the role of soil moisture in regulating terrestrial ET and the water cycle. These results can be used to better understand and predict shifts in the regional water cycle induced by drought and climate change