Analysis on DV-Hop Algorithm and its variants by considering threshold

Wireless Sensor networks is a network of lowpriced, small sized and energy constraint sensor nodes where each sensor node is programmed to sense the events and send it to the Base station using multi-hop communication. In almost all applications of Wireless Sensor Networks, event detection information is required along with the location of the event. Thus, to find the location of event, node localization plays an important role. Many researchers have put tremendous efforts in designing localization algorithms. In the literature, it is confirmed that DV-Hop algorithm and its variants are the most suitable range-free based algorithms for node localization, due to its cost effectiveness, simplicity and feasibility for medium to large scale networks, but these algorithms consume very high energy. The DV-Hop algorithm works in three phases. The first phase allows all the nodes to get their distance from few localized nodes called anchors in terms of hop. The hop is the count of neighboring nodes between two nodes. Then in second phase, the anchor nodes find out their approximate distances from every node. The third phase computes the location of node using the information obtained from first two phases and by applying trilateration method. The high energy is consumed due to transmission of large number of packets in the first two phases by anchor nodes. In order to reduce communication overhead of the first two phase of DV-Hop, an improved DV-Hop is proposed that considers only k-hop transmission of the anchor packet which reduces the communication overheads to the large extent. Simulation experiments and results prove that the proposed method reduces the energy consumption by approximately 50% compare to the traditional DV-Hop algorithm

A Multi-hop Topology Control Based on Inter-node Range Measurement for Wireless Sensor Networks Node Localization

In centralized range-based localization techniques, sufficiency of inter-node range information received by the base station strongly affects node position estimation results. Successful data aggregation is influenced by link stability of each connection of routes, especially in a multi-hop topology model. In general, measuring the inter-node range is only performed for position determination purposes. This research introduces the use of inter-node range measurement information for link selection in a multi-hop route composition in order to increase the rate of data aggregation. Due to irregularity problems of wireless media, two areas of node communication have been considered. The regular communication area is the area in which other nodes are able to perform symmetrical communication to the node without failure. The irregular area is the area in which other nodes are seldom able to communicate. Due to its instability, some existing methods tried to avoid the irregular area completely. The proposed method, named Virtual Boundaries (VBs) prioritizes these areas. The regular communication area’s nodes have high priority to be selected as link vertices; however, when there is no link candidate inside this area, nodes within the irregular area will be selected with respect to their range to the parent node. This technique resulted in a more robust multi-hop topology that can reduce isolated node numbers and increase the percentage of data collected by the base station accordingly

Overlapping Multi-hop Clustering for Wireless Sensor Networks

Clustering is a standard approach for achieving efficient and scalable performance in wireless sensor networks. Traditionally, clustering algorithms aim at generating a number of disjoint clusters that satisfy some criteria. In this paper, we formulate a novel clustering problem that aims at generating overlapping multi-hop clusters. Overlapping clusters are useful in many sensor network applications, including inter-cluster routing, node localization, and time synchronization protocols. We also propose a randomized, distributed multi-hop clustering algorithm (KOCA) for solving the overlapping clustering problem. KOCA aims at generating connected overlapping clusters that cover the entire sensor network with a specific average overlapping degree. Through analysis and simulation experiments we show how to select the different values of the parameters to achieve the clustering process objectives. Moreover, the results show that KOCA produces approximately equal-sized clusters, which allows distributing the load evenly over different clusters. In addition, KOCA is scalable; the clustering formation terminates in a constant time regardless of the network size

Reference Nodes Selection for Anchor-Free Localization in Wireless Sensor Networks

Dizertační práce se zabývá návrhem nového bezkotevního lokalizačního algoritmu sloužícího pro výpočet pozice uzlů v bezdrátových senzorových sítích. Provedené studie ukázaly, že dosavadní bezkotevní lokalizační algoritmy, pracující v paralelním režimu, dosahují malých lokalizačních chyb. Jejich nevýhodou ovšem je, že při sestavení množiny referenčních uzlu spotřebovávají daleko větší množství energie než algoritmy pracující v inkrementálním režimu. Paralelní lokalizační algoritmy využívají pro určení pozice referenční uzly nacházející se na protilehlých hranách bezdrátové sítě. Nový lokalizační algoritmus označený jako BRL (Boundary Recognition aided Localization) je založen na myšlence decentralizovaně detekovat uzly ležící na hranici síti a pouze z této množiny vybrat potřebný počet referenčních uzlu. Pomocí navrženého přístupu lze znažně snížit množství energie spotřebované v průběhu procesu výběru referenčních uzlů v senzorovém poli. Dalším přínosem ke snížení energetických nároku a zároveň zachování nízké lokalizační chyby je využití procesu multilaterace se třemi, eventuálně čtyřmi referenčními body. V rámci práce byly provedeny simulace několika dílčích algoritmu a jejich funkčnost byla ověřena experimentálně v reálné senzorové síti. Navržený algoritmus BRL byl porovnán z hlediska lokalizační chyby a počtu zpracovaných paketů s několika známými lokalizačními algoritmy. Výsledky simulací dokázaly, že navržený algoritmus představuje efektivní řešení pro přesnou a zároveň nízkoenergetickou lokalizaci uzlů v bezdrátových senzorových sítích.The doctoral thesis is focused on a design of a novel anchor free localization algorithm for wireless sensor networks. As introduction, the incremental and concurrent anchor free localization algorithms are presented and their performance is compared. It was found that contemporary anchor free localization algorithms working in the concurrent manner achieve a low localization error, but dissipate signicant energy reserves. A new Boundary Recognition Aided Localization algorithm presented in this thesis is based on an idea to recognize the nodes placed on the boundary of network and thus reduce the number of transmission realized during the reference nodes selection phase of the algorithm. For the position estimation, the algorithm employs the multilateration technique that work eectively with the low number of the reference nodes. Proposed algorithms are tested through the simulations and validated by the real experiment with the wireless sensor network. The novel Boundary Recognition Aided Localization algorithm is compared with the known algorithms in terms of localization error and the communication cost. The results show that the novel algorithm presents powerful solution for the anchor free localization.

Dead Reckoning Localization Technique for Mobile Wireless Sensor Networks

Localization in wireless sensor networks not only provides a node with its geographical location but also a basic requirement for other applications such as geographical routing. Although a rich literature is available for localization in static WSN, not enough work is done for mobile WSNs, owing to the complexity due to node mobility. Most of the existing techniques for localization in mobile WSNs uses Monte-Carlo localization, which is not only time-consuming but also memory intensive. They, consider either the unknown nodes or anchor nodes to be static. In this paper, we propose a technique called Dead Reckoning Localization for mobile WSNs. In the proposed technique all nodes (unknown nodes as well as anchor nodes) are mobile. Localization in DRLMSN is done at discrete time intervals called checkpoints. Unknown nodes are localized for the first time using three anchor nodes. For their subsequent localizations, only two anchor nodes are used. The proposed technique estimates two possible locations of a node Using Bezouts theorem. A dead reckoning approach is used to select one of the two estimated locations. We have evaluated DRLMSN through simulation using Castalia simulator, and is compared with a similar technique called RSS-MCL proposed by Wang and Zhu .Comment: Journal Paper, IET Wireless Sensor Systems, 201

Distributed Recognition of Reference Nodes for Wireless Sensor Network Localization

All known localization techniques for wireless sensor and ad-hoc networks require certain set of reference nodes being used for position estimation. The anchor-free techniques in contrast to anchor-based do not require reference nodes called anchors to be placed in the network area before localization operation itself, but they can establish own reference coordinate system to be used for the relative position estimation. We observed that contemporary anchor-free localization algorithms achieve a low localization error, but dissipate significant energy reserves during the recognition of reference nodes used for the position estimation. Therefore, we have proposed the optimized anchor-free localization algorithm referred to as BRL (Boundary Recognition aided Localization), which achieves a low localization error and mainly reduces the communication cost of the reference nodes recognition phase. The proposed BRL algorithm was investigated throughout the extensive simulations on the database of networks with the different number of nodes and densities and was compared in terms of communication cost and localization error with the known related algorithms such as AFL and CRP. Through the extensive simulations we have observed network conditions where novel BRL algorithm excels in comparison with the state of art