Key Signal Processing Technologies for High-speed Passive Optical Networks

With emerging technologies such as high-definition video, virtual reality, and cloud computing, bandwidth demand in the access networks is ever-increasing. Passive optical network (PON) has become a promising architecture thanks to its low cost and easy management. IEEE and ITU-T standard organizations have been standardizing the next-generation PON, targeting on increasing the single-channel capacity from 10 Gb/s to 25, 50, and 100 Gb/s as the solution to address the dramatic increase of bandwidth demand. However, since the access network is extremely cost-sensitive, many research problems imposed in the physical layer of PON need to be addressed in a cost-efficient way, which is the primary focus of this thesis. Utilizing the low-cost 10G optics to build up high-speed PON systems is a promising approach, where signal processing techniques are key of importance. Two categories of signal processing techniques have been extensively investigated, namely optical signal processing (OSP) and digital signal processing (DSP). Dispersion-supported equalization (DSE) as a novel OSP scheme is proposed to achieve bit-rate enhancement from 10 Gb/s to 25 Gb/s based on 10G class of optics. Thanks to the bandwidth improved by DSE, the non-return-zero on-off keying which is the simplest modulation format is able to be adopted in the PON system without complex modulation or DSP. Meanwhile, OSP is also proposed to work together with DSP enabling 50G PON while simplifying the DSP complexity. Using both DSE and simple feed-forward equalizer is able to support 50 Gb/s PAM-4 transmission with 10G optics. For C-band 50 Gb/s transmission, injection locking techniques as another OSP approach is proposed to compress the directly modulated laser chirp and increase system bandwidth in the optical domain where a doubled capacity from 25 Gb/s to 50 Gb/s over 20 km fiber can be built on top of 10G optics. For DSP, we investigated the advantages of neural network (NN) on the mitigation of the time-varying nonlinear semiconductor optical amplifier pattern effect. In order to reduce the expense caused by the high computation complexity of NN, a pre- equalizer is introduced at the central office that allows cost sharing for all connected access users. In order to push the PON system line rate to 100 Gb/s, a joint nonlinear Tomlinson- Harashima precoding-Volterra algorithm is proposed to compensate for both linear and nonlinear distortions where 100 Gb/s PAM-4 transmission over 20 km fiber with 15 GHz system bandwidth can be achieved

Directly Phase Modulated Transmitters and Coherent Recivers for Future Passive Optical Networks (PON)

En los últimos años, el tráfico de dato transmitido en las redes ópticas de acceso ha crecido exponencialmente debido a nuevos servicios como pueden ser la computación en la nube, el video online, la realidad virtual y aumentada, el internet de las cosas (IoT) y la convergencia entre las redes ópticas y redes inalámbricas en el paradigma del 5G. Estos nuevos servicios endurecen los requerimientos de las redes ópticas de acceso, como pueden ser unas tasas de datos más altas, un mayor alcance y un mayor número de usuarios. Para abordar estos requerimientos, esta tesis ha investigado, desarrollado y analizado nuevas tecnologías para transmisores y receptores orientadas a los dos tipos de redes ópticas de acceso que la comunidad científica ha identificado como posibles candidatas. Estos dos tipos de redes ópticas son las redes uDWDM y las redes TWDM como las redes NG-PON2 y sus evoluciones.Las redes uDWDM están basadas en la transmisión de tasas de datos relativamente bajas, por debajo de 2.5 Gbps, que son dedicadas en su totalidad a los usuarios finales. Estas tasas de datos relativamente bajas son multiplexadas en longitud de onda usando intervalos frecuenciales estrechos, del orden de 12.5 GHz o 6.25 GHz. En esta tesis, los transmisores modulados directamente en fase se han propuesto como posibles candidatos para estas redes uDWDM. En concreto, se han propuesto un DFB modulado directamente en fase con una tasa de datos de 1 Gbps; un RSOA bombeado por un VCSEL y modulado directamente en fase con una tasa de datos de 1 Gbps; y un VCSEL modulado directamente en fase con una tasa de datos de 1.25 Gbps y 2.5 Gbps. Estas señales moduladas directamente en fase son recibidas con un receptor heterodino con un único fotodiodo (PD) para mantener el coste tan bajo como sea posible. La combinación de estos transmisores modulados directamente en fase con el receptor heterodino con un único PD ha sido probada como unos candidatos muy prometedores para las redes ópticas de acceso basadas en redes uDWDM. Estas combinaciones proveen sensibilidades que varían entre -39.5 dBm y -52 dBm, que se traducen en balances de potencia que van desde 38.5 dB a 51 dB y por lo tanto en ratios de división o número de usuarios de entre 128 y 1024 después de una transmisión de 50 km a través de fibra monomodo estándar (SSMF).Además, los links de 1 Gbps formados por la modulación directa de DFBs o de RSOAs bombeados por VCSELs y el receptor heterodino con un único PD son usados como enlace de subida en canales bidireccionales. Estos enlaces de subida son combinados con enlaces de bajada basados en Nyquist-DPSK generada con un MZM y recibidos con un receptor heterodino de un único PD. Como parte de análisis de los canales bidireccionales, se ha analizado el estudio de la viabilidad del uso de LOs de bajo coste, como DFBs o VCSELs, en los receptores heterodinos con un único PD. Estos canales bidireccionales son también unos candidatos prometedores para las futuras redes uDWDM, ya que en esta tesis se ha probado que pueden proveer enlaces full-duplex de 1 Gbps usando intervalos frecuenciales tan pequeños como 6.25 GHz o 5 GHz. Estos canales bidireccionales tienen balances de potencia que van desde 37 dB a 42 dB y tienen posibles ratios de división de 128 o 256 después de una transmisión de 50 km a través de SSMF.Esta tesis también ha investigado y desarrollado receptores quasicoherentes para redes NG-PON2 y sus evoluciones. Este tipo de redes están basadas en altas tasas de datos, como 10 Gbps para redes NG-PON2 y 25 Gbps para las futuras evoluciones de NG-PON2, en entornos multi longitud de onda donde los usuarios son multiplexados en tiempo y longitud de onda (TWDM). El receptor quasicoherente usa la amplificación coherente gracias a la recepción heterodina y por tanto la sensibilidad del receptor es mejorada en comparación con los esquemas de detección directa. El receptor quasicoherente es independiente a la polarización, lo cual es una característica importante para los receptores coherentes. Además, el receptor quasicoherente permite seleccionar el canal de trabajo sin la necesidad de filtros ópticos y es un receptor independiente de la longitud de onda debido a que el canal de trabajo se puede elegir ajustando la longitud de onda del LO. El receptor quasicoherente de 10 Gbps muestra una sensibilidad -35.2 dBm y por tanto permite un balance de potencias de 35.64 dB y un ratio de división de 128 después de una transmisión de 40 km a través de SSMF.La combinación del receptor quasicoherente con un ecualizador FFE/DFE permite combatir la dispersión cromática de la banda C y conseguir un link de 25 Gbps con un alcance de 20 km a través de SSMF. El receptor quasicoherente a 25 Gbps con ecualización FFE/DFE muestra una mejor sensibilidad de -30.5 dBm con el llamado ecualizador de altas prestaciones, lo que lleva a un balance de potencias de25 dB. Si se utilizada el llamado ecualizador de baja complejidad, la sensibilidad cae a -27 dBm y el balance de potencias cae a 23 dBm. En ambos casos, el receptor quasicoherente a 25 Gbps con ecualización FFE/DFE permite un ratio de división de 32 después de una transmisión de 20 km a través de SSMF.En conclusión, esta tesis ha presentado transmisores (DFB, RSOA y VCSEL) modulados directamente en fase combinados con un receptor heterodino con un único PD como potenciales candidatos para las redes uDWDM. Esta tesis también ha presentados los receptores quasicoherentes como unos candidatos muy prometedores para las redes NG-PON2 y sus futuras evoluciones.<br /

Analog radio over fiber solutions for multi-band 5g systems

This study presents radio over fiber (RoF) solutions for the fifth-generation (5G) of wireless networks. After the state of the art and a technical background review, four main contributions are reported. The first one is proposing and investigating a RoF technique based on a dual-drive Mach-Zehnder modulator (DD-MZM) for multi-band mobile fronthauls, in which two radiofrequency (RF) signals in the predicted 5G bands individually feed an arm of the optical modulator. Experimental results demonstrate the approach enhances the RF interference mitigation and can prevail over traditional methods. The second contribution comprises the integration of a 5G transceiver, previously developed by our group, in a passive optical network (PON) using RoF technology and wavelength division multiplexing (WDM) overlay. The proposed architecture innovates by employing DD-MZM and enables to simultaneously transport baseband and 5G candidate RF signals in the same PON infrastructure. The proof-of-concept includes the transmission of a generalized frequency division multiplexing (GFDM) signal generated by the 5G transceiver in the 700 MHz band, a 26 GHz digitally modulated signal as a millimeter-waves 5G band, and a baseband signal from an gigabit PON (GPON). Experimental results demonstrate the 5G transceiver digital performance when using RoF technology for distributing the GFDM signal, as well as Gbit/s throughput at 26 GHz. The third contribution is the implementation of a flexible-waveform and multi-application fiber-wireless (FiWi) system toward 5G. Such system includes the FiWi transmission of the GFDM and filtered orthogonal frequency division multiplexing (F-OFDM) signals at 788 MHz, toward long-range cells for remote or rural mobile access, as well as the recently launched 5G NR standard in microwave and mm-waves, aiming enhanced mobile broadband indoor and outdoor applications. Digital signal processing (DSP) is used for selecting the waveform and linearizing the RoF link. Experimental results demonstrate the suitability of the proposed solution to address 5G scenarios and requirements, besides the applicability of using existent fiber-to-the-home (FTTH) networks from Internet service providers for implementing 5G systems. Finally, the fourth contribution is the implementation of a multi-band 5G NR system with photonic-assisted RF amplification (PAA). The approach takes advantage of a novel PAA technique, based on RoF technology and four-wave mixing effect, that allows straightforward integration to the transport networks. Experimental results demonstrate iv uniform and stable 15 dB wideband gain for Long Term Evolution (LTE) and three 5G signals, distributed in the frequency range from 780 MHz to 26 GHz and coexisting in the mobile fronthaul. The obtained digital performance has efficiently met the Third-Generation Partnership Project (3GPP) requirements, demonstrating the applicability of the proposed approach for using fiber-optic links to distribute and jointly amplify LTE and 5G signals in the optical domain.Agência 1Este trabalho apresenta soluções de rádio sobre fibra (RoF) para aplicações em redes sem fio de quinta geração (5G), e inclui quatro contribuições principais. A primeira delas refere-se à proposta e investigação de uma técnica de RoF baseada no modulador eletroóptico de braço duplo, dual-drive Mach-Zehnder (DD-MZM), para a transmissão simultânea de sinais de radiofrequência (RF) em bandas previstas para redes 5G. Resultados experimentais demonstram que o uso do DD-MZM favorece a ausência de interferência entre os sinais de RF transmitidos. A segunda contribuição trata da integração de um transceptor de RF, desenvolvido para aplicações 5G e apto a prover a forma de onda conhecida como generalized frequency division multiplexing (GFDM), em uma rede óptica passiva (PON) ao utilizar RoF e multiplexação por divisão de comprimento de onda (WDM). A arquitetura proposta permite transportar, na mesma infraestrutura de rede, sinais em banda base e de radiofrequência nas faixas do espectro candidatas para 5G. A prova de conceito inclui a distribuição conjunta de três tipos de sinais: um sinal GFDM na banda de 700 MHz, proveniente do transceptor desenvolvido; um sinal digital na frequência de 26 GHz, assumindo a faixa de ondas milimétricas; sinais em banda base provenientes de uma PON dedicada ao serviço de Internet. Resultados experimentais demonstram o desempenho do transceptor de RF ao utilizar a referida arquitetura para distribuir sinais GFDM, além de taxas de transmissão de dados da ordem de Gbit/s na faixa de 26 GHz. A terceira contribuição corresponde à implementação de um sistema fibra/rádio potencial para redes 5G, operando inclusive com o padrão ―5G New Radio (5G NR)‖ nas faixas de micro-ondas e ondas milimétricas. Tal sistema é capaz de prover macro células na banda de 700 MHz para aplicações de longo alcance e/ou rurais, utilizando sinais GFDM ou filtered orthogonal frequency division multiplexing (F-OFDM), assim como femto células na banda de 26 GHz, destinada a altas taxas de transmissão de dados para comunicações de curto alcance. Resultados experimentais demonstram a aplicabilidade da solução proposta para redes 5G, além da viabilidade de utilizar redes ópticas pertencentes a provedores de Internet para favorecer sistemas de nova geração. Por fim, a quarta contribuição trata da implementação de um sistema 5G NR multibanda, assistido por amplificação de RF no domínio óptico. Esse sistema faz uso de um novo método de amplificação, baseado no efeito não linear da mistura de quatro ondas, que vi permite integração direta em redes de transporte envolvendo rádio sobre fibra. Resultados experimentais demonstram ganho de RF igual a 15 dB em uma ampla faixa de frequências (700 MHz até 26 GHz), atendendo simultaneamente tecnologias de quarta e quinta geração. O desempenho digital obtido atendeu aos requisitos estabelecidos pela 3GPP (Third-Generation Partnership Project), indicando a aplicabilidade da solução em questão para distribuir e conjuntamente amplificar sinais de RF em enlaces de fibra óptica

A Carrierless Amplitude Phase (CAP) Modulation Format: Perspective and Prospect in Optical Transmission System

The explosive demand of broadband services nowadays requires data communication systems to have intensive capacity which subsequently increases the need for higher data rate as well. Although implementation of multiple wavelengths channels can be used (e.g. 4 × 25.8 Gb/s for 100 Gb/s connection) for such desired system, it usually leads to cost increment issue which is caused by employment of multiple optical components. Therefore, implementation of advanced modulation format using a single wavelength channel has become a preference to increase spectral efficiency by increasing the data rate for a given transmission system bandwidth. Conventional advanced modulation format however, involves a degree of complexity and costly transmission system. Hence, carrierless amplitude phase (CAP) modulation format has emerged as a promising advanced modulation format candidate due to spectral efficiency improvement ability with reduction of optical transceiver complexity and cost. The intriguing properties of CAP modulation format are reviewed as an attractive prospect in optical transmission system applications

Radio over fiber broadband access networks architectures based on wavelength division multiplexing techniques

The recent remarkable growth in bandwidth of both wired optical and wireless access networks supports a burst of new high bandwidth Internet applications such as: peer-topeer file sharing, cloud storage, on-line gaming, video streaming, etc. Within this scenario, the convergence of fixed and wireless access networks offers significant opportunities for network operators to satisfy user demands, and simultaneously reduce the cost of implementing and running separated wireless and wired networks. The integration of wired and wireless network can be accomplished within several scenarios and at several levels. In this thesis we will focus on converged radio over fiber architectures, particularly on two application scenarios: converged optical 60 GHz wireless networks and wireless overlay backhauling over bidirectional colorless wavelength division multiplexing passive optical networks (WDM-PONs). In the first application scenario, optical 60 GHz signal generation using external modulation of an optical carrier by means of lithium niobate (LiNbO3) Mach- Zehnder modulators (MZM) is considered. The performance of different optical modulation techniques, robust against fiber dispersion is assessed and dispersion mitigation strategies are identified. The study is extended to 60 GHz carriers digitally modulated with data and to systems employing subcarrier multiplexed (SCM) mm-wave channels. In the second application scenario, the performance of WDM-PONs employing reflective semiconductor optical amplifiers (RSOAs), transmitting an overlay orthogonal frequency-division multiplexing (OFDM) wireless signal is assessed analytically and experimentally, with the relevant system impairments being identified. It is demonstrated that the intermodulation due to the beating of the baseband signal and wireless signal at the receiver can seriously impair the wireless channel. Performance degradation of the wireless channel caused by the RSOA gain modulation owing to the downstream baseband data is also assessed, and system design guidelines are provided.Universidade do Algarve, Faculdade de Ciências e Tecnologi

Radio over fiber broadband access networks architectures based on wavelength division multiplexing techniques

The recent remarkable growth in bandwidth of both wired optical and wireless access networks supports a burst of new high bandwidth Internet applications such as: peer-topeer file sharing, cloud storage, on-line gaming, video streaming, etc. Within this scenario, the convergence of fixed and wireless access networks offers significant opportunities for network operators to satisfy user demands, and simultaneously reduce the cost of implementing and running separated wireless and wired networks. The integration of wired and wireless network can be accomplished within several scenarios and at several levels. In this thesis we will focus on converged radio over fiber architectures, particularly on two application scenarios: converged optical 60 GHz wireless networks and wireless overlay backhauling over bidirectional colorless wavelength division multiplexing passive optical networks (WDM-PONs). In the first application scenario, optical 60 GHz signal generation using external modulation of an optical carrier by means of lithium niobate (LiNbO3) Mach- Zehnder modulators (MZM) is considered. The performance of different optical modulation techniques, robust against fiber dispersion is assessed and dispersion mitigation strategies are identified. The study is extended to 60 GHz carriers digitally modulated with data and to systems employing subcarrier multiplexed (SCM) mm-wave channels. In the second application scenario, the performance of WDM-PONs employing reflective semiconductor optical amplifiers (RSOAs), transmitting an overlay orthogonal frequency-division multiplexing (OFDM) wireless signal is assessed analytically and experimentally, with the relevant system impairments being identified. It is demonstrated that the intermodulation due to the beating of the baseband signal and wireless signal at the receiver can seriously impair the wireless channel. Performance degradation of the wireless channel caused by the RSOA gain modulation owing to the downstream baseband data is also assessed, and system design guidelines are provided.Universidade do Algarve, Faculdade de Ciências e Tecnologi

Photonic Modulation and Demodulation techniques for Multi-Gb/s Millimetre wave Wireless Links

Los sistemas de radio sobre fibra(Radio Over fibre ROF) ofrecen el ancho de banda y flexibilidad necesario para la generación y distribución de del señales inalámbricas del futuro en una arquitectura de red óptica, que reduce el coste de las redes centralizando el procesado y simplificando la ubicación de la antena (estación de base EB). El uso de sistemas de comunicaciones ópticas como una media de transporte de señales inalámbricas en enlaces RoF reduce el cuello de botella entre los estándares de acceso inalámbrico y cableado en un dominio convergente óptico. Las redes de acceso ópticas están evolucionando con capacidades de hasta 10 Gb/s con el estándard 10GEPON, dejando un cuello de botella entre tecnologías de acceso inalámbrico y óptico. . Eso ha motivado gran esfuerzo de investigación en la generación y distribución de señales inalámbricas de alta capacidad (> 10 Gb/s) basada en RoF. En esta tesis se ha investigado el uso de técnicas fotónicas para la generación , distribución y demodulación de señales inalámbricas moduladas vectorialmente. Esta tesis está principalmente dedicada a la generación de señales inalámbricas espectralmente eficientes como la modulación de fase en cuadratura (QPSK) o modulación de amplitud cuadratura de multinivel (M-QAM). El trabajo presentado en esta tesis está clasificado en dos partes: la primera de ellas trata de las técnicas fotónicas que utilizan señales eléctricas coherente para la generación y demodulación de señales inalámbricas, mientras la segunda parte trata de usar señales ópticas incoherentes. En la primera parte de la tesis, están presentadas diferentes arquitecturas de sistemas y están analizadas numéricamente, y demostradas experimentalmente. Un nuevo concepto denominado "modulación vectorial fotónica" (PVM) es propuesto para la generación de señales inalámbricas con una modulación M-QAM. Basado en esta técnica se presenta la generación de señales de capacidad 10Gb/s con una modulación de QPSK y 16-QAM.Sambaraju -, R. (2010). Photonic Modulation and Demodulation techniques for Multi-Gb/s Millimetre wave Wireless Links [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/8857Palanci