Intelligent Devices for IoT Applications

Internet of Things (IoT) devices refer to a vast network of physical devices that are connected to the internet and can communicate with each other through sensors and software. These devices range from simple household appliances, like smart thermostats and security cameras, to more complex industrial equipment, such as sensors used in manufacturing and logistics. Specially, IoT enabled wireless gas sensing systems which can withstand harsh environments without compromising the performance are getting popular day by day, which necessitates adequate developments in this field. By being the essential components of a wireless gas sensing system, both the sensor and the elements for communication should be agile and resilient when it comes to tackle unfavorable scenario. Moreover, gas sensors are prone to drift, which can lead to inaccurate readings and decreased reliability over time. Again, recent advancements in antenna design, such as fractal antennas and metamaterial structures, have shown promises in improving the bandwidth and gain parameters of the antennas built on top of high temperature tackling substrates. This piece of research targets three fundamental sections: demonstration of recent advances in data driven techniques for gas sensing system optimization, designing of antennas for different applications, and device design as well as fabrication. The Dimatix DMP-2831 inkjet printer has been optimized to operate with six different inks and two different substrates including PET and 3 mol yttria-stabilized zirconia (3YSZ) based ceramic substrate. Later, the feature oriented gas sensor data analysis to investigate correlations among stability, selectivity and long term drift is illustrated, which should significant relations among those parameters that can be considered while designing different intelligent data driven models to compensate drift. Moreover, a subspace transfer based approach is proposed to classify drifted gas sensor response to detect particular gas with higher accuracy. The model achieved an average accuracy greater than 87% while using only 40% of the total dataset to be trained. In the field of antenna technology, a co-planar waveguide (CPW) fed super wideband antenna is proposed which can cover C, X, Ku, K, Ka, Q, V, and W bands according to the simulated performance with high gain and radiation efficiency. Again, a high temperature tolerant antenna based on 3YSZ substrate is proposed which achieved good alignment between the simulated and fabricated device performance

A Scalable Arrangement Method for Aperiodic Array Antennas to Reduce Peak Sidelobe Level

Peak sidelobe level reduction (PSLR) is crucial in the application of large-scale array antenna, which directly determines the radiation performance of array antenna. We study the PSLR of subarray level aperiodic arrays and propose three array structures: dislocated subarrays with uniform elements (DSUE), uniform subarrays with random elements (USRE), dislocated subarrays with random elements (DSRE). To optimize the dislocation position of subarrays and random position of elements, the improved Bat algorithm (IBA) is applied. To draw the comparison of PSLR effect among these three array structures, we take three size of array antennas from small to large as examples to simulate and calculate the redundancy and peak sidelobe level (PSLL) of them. The results show that DSRE is the optimal array structure by analyzing the dislocation distance of subarray, scanning angle and applicable frequency. The proposed design method is a universal and scalable method, which is of great application value to the design of large-scale aperiodic array antenna

Performance optimisation of small antenna arrays

This thesis addresses radiation pattern synthesis problems for small linear periodic phased arrays (with array elements less then 10). Due to the small array size conventional pattern synthesis techniques fail to produce the required results. In the case of practical small arrays, mutual coupling and element pattern asymmetric effect degrade the array radiation performance. The main performance metrics considered in this thesis include side lobe level (SLL), gain, halfpower beamwidth (HPBW) and mainbeam scan direction. The conventional pattern synthesis approaches result in sub optimal gain, SLL and HPBW due to the limited number of elements and the mutual coupling involved. In case of difference pattern synthesis these factors resulted in lower difference pattern slope, degraded SLL and difference peak asymmetry. The sum and difference patterns are used in monopulse arrays and a simplified feed that could produce both patterns with acceptable radiation properties is of interest and has been examined (chapter 5). A conventional technique is applied to small arrays to synthesise a sector beam and there is limited control over the radiation pattern. It is shown that the mutual coupling has significant effect on the array radiation pattern and mitigation is necessary for optimum performance (chapter 6). Furthermore, wideband phased arrays may have a natural limitation of the HPBW in low gain applications and minimisation of the variation becomes important. Also the SLL variations for wideband antenna arrays in the presence of mutual coupling considerably degrade the radiation pattern. The mutual coupling degrades significantly the radiation pattern performance in case of small scanning wideband arrays (chapter 7). It is the primary goal of this thesis to develop an optimisation scheme thatis applied in the above scenarios (chapters 3 & 4). The only degree of freedom assumed is the array excitation. Optimised amplitude and phase for each element in the array are determined by the proposed scheme, concurrently. The deterministic optimisation techniques reported in the literature for the pattern synthesis may involve complicated problem modelling. The heuristic opti-misation techniques generally are computationally expensive. The proposedIntelligent z-space Boundary Condition-Particle Swarm Optimiser (IzBC-PSO)is based on a heuristic algorithm. This scheme can be applied to a wider rangeof problems without significant modifications and requires fewer computationscompared to the competing techniques.In order to verify the performance of IzBC-PSO antenna array measure-ments were performed in the receiving mode only using the online and offlinedigital beamforming setups described in chapter 8. The measurement resultsshow that the proposed scheme may be successfully applied with both onlineand offline digital beamformers for a practical small array (chapter 8).EThOS - Electronic Theses Online ServiceCOMSATS Institute of Information Technology (CIIT), Islamabad, PakistanGBUnited Kingdo

Analysis and design of smart antenna arrays (SAAs) for improved directivity at GHz range for wireless communication systems.

Doctor of Philosophy in Electronic Engineering. University of KwaZulu-Natal, Durban 2018.Abstract available in PDF file

Dynamic Capacity Enhancement using a Smart Antenna in Mobile Telecommunications Networks

This work describes an investigation into the performance of antennas for mobile base station applications and techniques for improving the coverage and capacity within a base station cell. The work starts by tracing the development of mobile systems, both in technical and commercial terms, from the earliest analogue systems to present day broadband systems and includes anticipated future developments. This is followed by an outline of how smart antenna systems can be utilised to improve cell coverage and capacity. A novel smart antenna system incorporating an array of slant ± 450 dual- polarised stacked patch elements four columns wide excited by a novel multi-beam forming and beam shaping network has been designed, simulated and implemented. It is found that for an ideal smart antenna array, four narrow overlapping beams, one wide “broadcast channel” beam and right and left shaped beams can be provided. Results are presented for the simulation of the smart antenna system using CST EM simulation software which inherently includes mutual coupling and the effects of a truncated ground plane on the element patterns. The results show some significant changes to the desired set of coverage patterns and various mutual coupling compensation techniques have been reviewed. An improved design technique has been developed for compensating the performance degrading effects of mutual coupling and finite ground plane dimensions in microstrip antenna arrays. The improved technique utilises combination of two previously known techniques: complex excitation weights compensation by inversion of the array mutual coupling scattering matrix and the incorporation of a WAIM (wide angle impedance matching) sheet. The technique has been applied to a novel multi-beam smart antenna array to demonstrate the efficacy of the technique by electromagnetic simulation. In addition, a demonstrator array has been constructed and tested which has yielded a positive conformation of the simulation results. For the developed demonstrator array which provides seven different beams, beams “footprints” have been predicted both for free space propagation and for urban propagation to evaluate the dynamic capacity performance of the smart antenna in a 3G mobile network. The results indicate that sector capacity can be dynamically tailored to user demand profiles by selection of the appropriate beam patterns provided by the novel smart antenna system

Dynamic capacity enhancement using a smart antenna in mobile telecommunications networks

This work describes an investigation into the performance of antennas for mobile base station applications and techniques for improving the coverage and capacity within a base station cell. The work starts by tracing the development of mobile systems, both in technical and commercial terms, from the earliest analogue systems to present day broadband systems and includes anticipated future developments. This is followed by an outline of how smart antenna systems can be utilised to improve cell coverage and capacity. A novel smart antenna system incorporating an array of slant ± 450 dual- polarised stacked patch elements four columns wide excited by a novel multi-beam forming and beam shaping network has been designed, simulated and implemented. It is found that for an ideal smart antenna array, four narrow overlapping beams, one wide “broadcast channel” beam and right and left shaped beams can be provided. Results are presented for the simulation of the smart antenna system using CST EM simulation software which inherently includes mutual coupling and the effects of a truncated ground plane on the element patterns. The results show some significant changes to the desired set of coverage patterns and various mutual coupling compensation techniques have been reviewed. An improved design technique has been developed for compensating the performance degrading effects of mutual coupling and finite ground plane dimensions in microstrip antenna arrays. The improved technique utilises combination of two previously known techniques: complex excitation weights compensation by inversion of the array mutual coupling scattering matrix and the incorporation of a WAIM (wide angle impedance matching) sheet. The technique has been applied to a novel multi-beam smart antenna array to demonstrate the efficacy of the technique by electromagnetic simulation. In addition, a demonstrator array has been constructed and tested which has yielded a positive conformation of the simulation results. For the developed demonstrator array which provides seven different beams, beams “footprints” have been predicted both for free space propagation and for urban propagation to evaluate the dynamic capacity performance of the smart antenna in a 3G mobile network. The results indicate that sector capacity can be dynamically tailored to user demand profiles by selection of the appropriate beam patterns provided by the novel smart antenna system.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Large space structures and systems in the space station era: A bibliography with indexes (supplement 04)

Bibliographies and abstracts are listed for 1211 reports, articles, and other documents introduced into the NASA scientific and technical information system between 1 Jul. and 30 Dec. 1991. Its purpose is to provide helpful information to the researcher, manager, and designer in technology development and mission design according to system, interactive analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion, and solar power satellite systems

Journal of Telecommunications and Information Technology, 2017, nr 3

kwartalni

Large space structures and systems in the space station era: A bibliography with indexes

Bibliographies and abstracts are listed for 1372 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1, 1990 and June 30, 1990. Its purpose is to provide helpful information to the researcher, manager, and designer in technology development and mission design according to system, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion, and solar power satellite systems