Improving OpenStack Swift interaction with the I/O stack to enable software defined storage

This paper analyses how OpenStack Swift, a distributed object storage service for a globally used middleware, interacts with the I/O subsystem through the Operating System. This interaction, which seems organised and clean on the middleware side, becomes disordered on the device side when using mechanical disk drives, due to the way threads are used internally to request data. We will show that only modifying the Swift threading model we achieve an 18% mean improvement in performance with objects larger than 512 KiB and obtain a similar performance with smaller objects. Compared to the original scenario, the performance obtained on both scenarios is obtained in a fair way: the bandwidth is shared equally between concurrently accessed objects. Moreover, this threading model allows us to apply techniques for Software Defined Storage (SDS). We show an implementation of a Bandwidth Differentiation technique that can control each data stream and that guarantees a high utilization of the device.The research leading to these results has received funding from the European Community under the IOStack (H2020-ICT-2014-7-1) project, by the Spanish Ministry of Economy and Competitiveness under the TIN2015-65316-P grant and by the Catalan Government under the 2014-SGR-1051 grant. To learn more about the IOStack H2020 project, please visit http:nnwww.iostack.eu.Peer ReviewedPostprint (author's final draft

A Priority-based Fair Queuing (PFQ) Model for Wireless Healthcare System

Healthcare is a very active research area, primarily due to the increase in the elderly population that leads to increasing number of emergency situations that require urgent actions. In recent years some of wireless networked medical devices were equipped with different sensors to measure and report on vital signs of patient remotely. The most important sensors are Heart Beat Rate (ECG), Pressure and Glucose sensors. However, the strict requirements and real-time nature of medical applications dictate the extreme importance and need for appropriate Quality of Service (QoS), fast and accurate delivery of a patient’s measurements in reliable e-Health ecosystem. As the elderly age and older adult population is increasing (65 years and above) due to the advancement in medicine and medical care in the last two decades; high QoS and reliable e-health ecosystem has become a major challenge in Healthcare especially for patients who require continuous monitoring and attention. Nevertheless, predictions have indicated that elderly population will be approximately 2 billion in developing countries by 2050 where availability of medical staff shall be unable to cope with this growth and emergency cases that need immediate intervention. On the other side, limitations in communication networks capacity, congestions and the humongous increase of devices, applications and IOT using the available communication networks add extra layer of challenges on E-health ecosystem such as time constraints, quality of measurements and signals reaching healthcare centres. Hence this research has tackled the delay and jitter parameters in E-health M2M wireless communication and succeeded in reducing them in comparison to current available models. The novelty of this research has succeeded in developing a new Priority Queuing model ‘’Priority Based-Fair Queuing’’ (PFQ) where a new priority level and concept of ‘’Patient’s Health Record’’ (PHR) has been developed and integrated with the Priority Parameters (PP) values of each sensor to add a second level of priority. The results and data analysis performed on the PFQ model under different scenarios simulating real M2M E-health environment have revealed that the PFQ has outperformed the results obtained from simulating the widely used current models such as First in First Out (FIFO) and Weight Fair Queuing (WFQ). PFQ model has improved transmission of ECG sensor data by decreasing delay and jitter in emergency cases by 83.32% and 75.88% respectively in comparison to FIFO and 46.65% and 60.13% with respect to WFQ model. Similarly, in pressure sensor the improvements were 82.41% and 71.5% and 68.43% and 73.36% in comparison to FIFO and WFQ respectively. Data transmission were also improved in the Glucose sensor by 80.85% and 64.7% and 92.1% and 83.17% in comparison to FIFO and WFQ respectively. However, non-emergency cases data transmission using PFQ model was negatively impacted and scored higher rates than FIFO and WFQ since PFQ tends to give higher priority to emergency cases. Thus, a derivative from the PFQ model has been developed to create a new version namely “Priority Based-Fair Queuing-Tolerated Delay” (PFQ-TD) to balance the data transmission between emergency and non-emergency cases where tolerated delay in emergency cases has been considered. PFQ-TD has succeeded in balancing fairly this issue and reducing the total average delay and jitter of emergency and non-emergency cases in all sensors and keep them within the acceptable allowable standards. PFQ-TD has improved the overall average delay and jitter in emergency and non-emergency cases among all sensors by 41% and 84% respectively in comparison to PFQ model

A survey of communication protocols for internet of things and related challenges of fog and cloud computing integration

The fast increment in the number of IoT (Internet of Things) devices is accelerating the research on new solutions to make cloud services scalable. In this context, the novel concept of fog computing as well as the combined fog-to-cloud computing paradigm is becoming essential to decentralize the cloud, while bringing the services closer to the end-system. This article surveys e application layer communication protocols to fulfill the IoT communication requirements, and their potential for implementation in fog- and cloud-based IoT systems. To this end, the article first briefly presents potential protocol candidates, including request-reply and publish-subscribe protocols. After that, the article surveys these protocols based on their main characteristics, as well as the main performance issues, including latency, energy consumption, and network throughput. These findings are thereafter used to place the protocols in each segment of the system (IoT, fog, cloud), and thus opens up the discussion on their choice, interoperability, and wider system integration. The survey is expected to be useful to system architects and protocol designers when choosing the communication protocols in an integrated IoT-to-fog-to-cloud system architecture.Peer ReviewedPostprint (author's final draft

A cross-layer approach to enhance QoS for multimedia applications over satellite

The need for on-demand QoS support for communications over satellite is of primary importance for distributed multimedia applications. This is particularly true for the return link which is often a bottleneck due to the large set of end-users accessing a very limited uplink resource. Facing this need, Demand Assignment Multiple Access (DAMA) is a classical technique that allows satellite operators to offer various types of services, while managing the resources of the satellite system efficiently. Tackling the quality degradation and delay accumulation issues that can result from the use of these techniques, this paper proposes an instantiation of the Application Layer Framing (ALF) approach, using a cross-layer interpreter(xQoS-Interpreter). The information provided by this interpreter is used to manage the resource provided to a terminal by the satellite system in order to improve the quality of multimedia presentations from the end users point of view. Several experiments are carried out for different loads on the return link. Their impact on QoS is measured through different application as well as network level metrics

Linking session based services with transport plane resources in IP multimedia subsystems.

The massive success and proliferation of Internet technologies has forced network operators to recognise the benefits of an IP-based communications framework. The IP Multimedia Subsystem (IMS) has been proposed as a candidate technology to provide a non-disruptive strategy in the move to all-IP and to facilitate the true convergence of data and real-time multimedia services. Despite the obvious advantages of creating a controlled environment for deploying IP services, and hence increasing the value of the telco bundle, there are several challenges that face IMS deployment. The most critical is that posed by the widespread proliferation ofWeb 2.0 services. This environment is not seen as robust enough to be used by network operators for revenue generating services. However IMS operators will need to justify charging for services that are typically available free of charge in the Internet space. Reliability and guaranteed transport of multimedia services by the efficient management of resources will be critical to differentiate IMS services. This thesis investigates resource management within the IMS framework. The standardisation of NGN/IMS resource management frameworks has been fragmented, resulting in weak functional and interface specifications. To facilitate more coherent, focused research and address interoperability concerns that could hamper deployment, a Common Policy and Charging Control (PCC) architecture is presented that defines a set of generic terms and functional elements. A review of related literature and standardisation reveals severe shortcomings regarding vertical and horizontal coordination of resources in the IMS framework. The deployment of new services should not require QoS standardisation or network upgrade, though in the current architecture advanced multimedia services are not catered for. It has been found that end-to-end QoS mechanisms in the Common PCC framework are elementary. To address these challenges and assist network operators when formulating their iii NGN strategies, this thesis proposes an application driven policy control architecture that incorporates end-user and service requirements into the QoS negotiation procedure. This architecture facilitates full interaction between service control and resource control planes, and between application developers and the policies that govern resource control. Furthermore, a novel, session based end-to-end policy control architecture is proposed to support inter-domain coordination across IMS domains. This architecture uses SIP inherent routing information to discover the routes traversed by the signalling and the associated routes traversed by the media. This mechanism effectively allows applications to issue resource requests from their home domain and enable end-to-end QoS connectivity across all traversed transport segments. Standard interfaces are used and transport plane overhaul is not necessary for this functionality. The Common PCC, application driven and session based end-to-end architectures are implemented in a standards compliant and entirely open source practical testbed. This demonstrates proof of concept and provides a platform for performance evaluations. It has been found that while there is a cost in delay and traffic overhead when implementing the complete architecture, this cost falls within established criteria and will have an acceptable effect on end-user experience. The open nature of the practical testbed ensures that all evaluations are fully reproducible and provides a convenient point of departure for future work. While it is important to leave room for flexibility and vendor innovation, it is critical that the harmonisation of NGN/IMS resource management frameworks takes place and that the architectures proposed in this thesis be further developed and integrated into the single set of specifications. The alternative is general interoperability issues that could render end-to-end QoS provisioning for advanced multimedia services almost impossible

Deliverable JRA1.1: Evaluation of current network control and management planes for multi-domain network infrastructure

This deliverable includes a compilation and evaluation of available control and management architectures and protocols applicable to a multilayer infrastructure in a multi-domain Virtual Network environment.The scope of this deliverable is mainly focused on the virtualisation of the resources within a network and at processing nodes. The virtualization of the FEDERICA infrastructure allows the provisioning of its available resources to users by means of FEDERICA slices. A slice is seen by the user as a real physical network under his/her domain, however it maps to a logical partition (a virtual instance) of the physical FEDERICA resources. A slice is built to exhibit to the highest degree all the principles applicable to a physical network (isolation, reproducibility, manageability, ...). Currently, there are no standard definitions available for network virtualization or its associated architectures. Therefore, this deliverable proposes the Virtual Network layer architecture and evaluates a set of Management- and Control Planes that can be used for the partitioning and virtualization of the FEDERICA network resources. This evaluation has been performed taking into account an initial set of FEDERICA requirements; a possible extension of the selected tools will be evaluated in future deliverables. The studies described in this deliverable define the virtual architecture of the FEDERICA infrastructure. During this activity, the need has been recognised to establish a new set of basic definitions (taxonomy) for the building blocks that compose the so-called slice, i.e. the virtual network instantiation (which is virtual with regard to the abstracted view made of the building blocks of the FEDERICA infrastructure) and its architectural plane representation. These definitions will be established as a common nomenclature for the FEDERICA project. Other important aspects when defining a new architecture are the user requirements. It is crucial that the resulting architecture fits the demands that users may have. Since this deliverable has been produced at the same time as the contact process with users, made by the project activities related to the Use Case definitions, JRA1 has proposed a set of basic Use Cases to be considered as starting point for its internal studies. When researchers want to experiment with their developments, they need not only network resources on their slices, but also a slice of the processing resources. These processing slice resources are understood as virtual machine instances that users can use to make them behave as software routers or end nodes, on which to download the software protocols or applications they have produced and want to assess in a realistic environment. Hence, this deliverable also studies the APIs of several virtual machine management software products in order to identify which best suits FEDERICA’s needs.Postprint (published version

Network emulation focusing on QoS-Oriented satellite communication

This chapter proposes network emulation basics and a complete case study of QoS-oriented Satellite Communication