QoS-Aware Remote Bindings in IP Based Mobility

QoS and mobility is a field that still has some performance issues. QoS degrade when IP based nodes become mobile. This thesis tries to make IP based networks as good as cellular networks, when it comes to mobility. We focus on solving the added complexity introduced by QoS in mobility management in the middleware layer, inside a remote binding. The main problem states, that we should find out how a remote binding can adapt and enhance QoS-parameters that perform poorly in IP based mobility management. The methods used are testing and prototyping. We test existing mobility management software (Mobile IP based) and design, implement and test a QoS-Aware Remote Binding, named MobiBind. A custom traffic generator, KGen, was developed as part of this thesis, in order to performe testing. In the test of Mobile IP, we found that the QoS parameters; packet loss and seamlessness underperformed. We also found that hand-overs in IP based mobility takes about one second to complete. MobiBind did manage to increase performance of both packet loss and seamlessness in mobility management. This did however increase the delay (round trip time). We found that the main problem in mobility management is the hand-overs, and the connection breakage of about one second. This introduces QoS degeneration that in our Mobile IP tests showed up in the QoS parameters packet loss and seamlessness. MobiBind increased performance of these QoS parameters, at the cost of delay. This indicates that there is a tradeoff between the different QoS parameters, and that total QoS might be difficult to increase unless the underlying problem is fixed, in this case; the connection breakage. MobiBind enables application developers to control which QoS parameters mobility management impacts

Paying for high speed networking services

The idea of a free network is a myth of the past. Networking costs are expected to remain a burden to future IT budgets, no doubt raising questions regarding the payment of such services. Users do not normally pay to use local area networks, as companies tend to own their LANs. However, when wide area or international networks are considered, the situation is different. It is argued that in these cases the invoicing and payment system should be integral to the network's communication protocol. This implies changes to the networking protocol (to handle invoicing) as well as a new look at customary ideas of representing currency (to handle payment). In this dissertation, an invoicing and payment scheme that uses electronic cash and is implemented as part of the basic ATM protocols is discussed. The main advantages of this scheme can be summarized as a low administrative overhead and user privacy.Computer ScienceM. Sc. (Computer Science

The design and application of power line carrier communication and remote meter reading for use in integrated services and broadband - integrated services digital networks

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN009939 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Satellite Networks: Architectures, Applications, and Technologies

Since global satellite networks are moving to the forefront in enhancing the national and global information infrastructures due to communication satellites' unique networking characteristics, a workshop was organized to assess the progress made to date and chart the future. This workshop provided the forum to assess the current state-of-the-art, identify key issues, and highlight the emerging trends in the next-generation architectures, data protocol development, communication interoperability, and applications. Presentations on overview, state-of-the-art in research, development, deployment and applications and future trends on satellite networks are assembled

QoS Provisioning in Converged Satellite and Terrestrial Networks: A Survey of the State-of-the-Art

It has been widely acknowledged that future networks will need to provide significantly more capacity than current ones in order to deal with the increasing traffic demands of the users. Particularly in regions where optical fibers are unlikely to be deployed due to economical constraints, this is a major challenge. One option to address this issue is to complement existing narrow-band terrestrial networks with additional satellite connections. Satellites cover huge areas, and recent developments have considerably increased the available capacity while decreasing the cost. However, geostationary satellite links have significantly different link characteristics than most terrestrial links, mainly due to the higher signal propagation time, which often renders them not suitable for delay intolerant traffic. This paper surveys the current state-of-the-art of satellite and terrestrial network convergence. We mainly focus on scenarios in which satellite networks complement existing terrestrial infrastructures, i.e., parallel satellite and terrestrial links exist, in order to provide high bandwidth connections while ideally achieving a similar end user quality-of-experience as in high bandwidth terrestrial networks. Thus, we identify the technical challenges associated with the convergence of satellite and terrestrial networks and analyze the related work. Based on this, we identify four key functional building blocks, which are essential to distribute traffic optimally between the terrestrial and the satellite networks. These are the traffic requirement identification function, the link characteristics identification function, as well as the traffic engineering function and the execution function. Afterwards, we survey current network architectures with respect to these key functional building blocks and perform a gap analysis, which shows that all analyzed network architectures require adaptations to effectively support converged satellite and terrestrial networks. Hence, we conclude by formulating several open research questions with respect to satellite and terrestrial network convergence.This work was supported by the BATS Research Project through the European Union Seventh Framework Programme under Contract 317533

A Generic Network and System Management Framework

Networks and distributed systems have formed the basis of an ongoing communications revolution that has led to the genesis of a wide variety of services. The constantly increasing size and complexity of these systems does not come without problems. In some organisations, the deployment of Information Technology has reached a state where the benefits from downsizing and rightsizing by adding new services are undermined by the effort required to keep the system running. Management of networks and distributed systems in general has a straightforward goal: to provide a productive environment in which work can be performed effectively. The work required for management should be a small fraction of the total effort. Most IT systems are still managed in an ad hoc style without any carefully elaborated plan. In such an environment the success of management decisions depends totally on the qualification and knowledge of the administrator. The thesis provides an analysis of the state of the art in the area of Network and System Management and identifies the key requirements that must be addressed for the provisioning of Integrated Management Services. These include the integration of the different management related aspects (i.e. integration of heterogeneous Network, System and Service Management). The thesis then proposes a new framework, INSMware, for the provision of Management Services. It provides a fundamental basis for the realisation of a new approach to Network and System Management. It is argued that Management Systems can be derived from a set of pre-fabricated and reusable Building Blocks that break up the required functionality into a number of separate entities rather than being developed from scratch. It proposes a high-level logical model in order to accommodate the range of requirements and environments applicable to Integrated Network and System Management that can be used as a reference model. A development methodology is introduced that reflects principles of the proposed approach, and provides guidelines to structure the analysis, design and implementation phases of a management system. The INSMware approach can further be combined with the componentware paradigm for the implementation of the management system. Based on these principles, a prototype for the management of SNMP systems has been implemented using industry standard middleware technologies. It is argued that development of a management system based on Componentware principles can offer a number of benefits. INSMware Components may be re-used and system solutions will become more modular and thereby easier to construct and maintain

RIACS

The Research Institute for Advanced Computer Science (RIACS) was established by the Universities Space Research Association (USRA) at the NASA Ames Research Center (ARC) on June 6, 1983. RIACS is privately operated by USRA, a consortium of universities that serves as a bridge between NASA and the academic community. Under a five-year co-operative agreement with NASA, research at RIACS is focused on areas that are strategically enabling to the Ames Research Center's role as NASA's Center of Excellence for Information Technology. The primary mission of RIACS is charted to carry out research and development in computer science. This work is devoted in the main to tasks that are strategically enabling with respect to NASA's bold mission in space exploration and aeronautics. There are three foci for this work: (1) Automated Reasoning. (2) Human-Centered Computing. and (3) High Performance Computing and Networking. RIACS has the additional goal of broadening the base of researcher in these areas of importance to the nation's space and aeronautics enterprises. Through its visiting scientist program, RIACS facilitates the participation of university-based researchers, including both faculty and students, in the research activities of NASA and RIACS. RIACS researchers work in close collaboration with NASA computer scientists on projects such as the Remote Agent Experiment on Deep Space One mission, and Super-Resolution Surface Modeling

IP-based virtual private networks and proportional quality of service differentiation

IP-based virtual private networks (VPNs) have the potential of delivering cost-effective, secure, and private network-like services. Having surveyed current enabling techniques, an overall picture of IP VPN implementations is presented. In order to provision the equivalent quality of service (QoS) of legacy connection-oriented layer 2 VPNs (e.g., Frame Relay and ATM), IP VPNs have to overcome the intrinsically best effort characteristics of the Internet. Subsequently, a hierarchical QoS guarantee framework for IP VPNs is proposed, stitching together development progresses from recent research and engineering work. To differentiate IP VPN QoS, the proportional QoS differentiation model, whose QoS specification granularity compromises that of IntServ and Diffserv, emerges as a potential solution. The investigation of its claimed capability of providing the predictable and controllable QoS differentiation is then conducted. With respect to the loss rate differentiation, the packet shortage phenomenon shown in two classical proportional loss rate (PLR) dropping schemes is studied. On the pursuit of a feasible solution, the potential of compromising the system resource, that is, the buffer, is ruled out; instead, an enhanced debt-aware mechanism is suggested to relieve the negative effects of packet shortage. Simulation results show that debt-aware partially curbs the biased loss rate ratios, and improves the queueing delay performance as well. With respect to the delay differentiation, the dynamic behavior of the average delay difference between successive classes is first analyzed, aiming to gain insights of system dynamics. Then, two classical delay differentiation mechanisms, that is,proportional average delay (PAD) and waiting time priority (WTP), are simulated and discussed. Based on observations on their differentiation performances over both short and long time periods, a combined delay differentiation (CDD) scheme is introduced. Simulations are utilized to validate this method. Both loss and delay differentiations are based on a series of differentiation parameters. Though previous work on the selection of delay differentiation parameters has been presented, that of loss differentiation parameters mostly relied on network operators\u27 experience. A quantitative guideline, based on the principles of queueing and optimization, is then proposed to compute loss differentiation parameters. Aside from analysis, the new approach is substantiated by numerical results