Efficient Arithmetic for the Implementation of Elliptic Curve Cryptography

The technology of elliptic curve cryptography is now an important branch in public-key based crypto-system. Cryptographic mechanisms based on elliptic curves depend on the arithmetic of points on the curve. The most important arithmetic is multiplying a point on the curve by an integer. This operation is known as elliptic curve scalar (or point) multiplication operation. A cryptographic device is supposed to perform this operation efficiently and securely. The elliptic curve scalar multiplication operation is performed by combining the elliptic curve point routines that are defined in terms of the underlying finite field arithmetic operations. This thesis focuses on hardware architecture designs of elliptic curve operations. In the first part, we aim at finding new architectures to implement the finite field arithmetic multiplication operation more efficiently. In this regard, we propose novel schemes for the serial-out bit-level (SOBL) arithmetic multiplication operation in the polynomial basis over F_2^m. We show that the smallest SOBL scheme presented here can provide about 26-30\% reduction in area-complexity cost and about 22-24\% reduction in power consumptions for F_2^{163} compared to the current state-of-the-art bit-level multiplier schemes. Then, we employ the proposed SOBL schemes to present new hybrid-double multiplication architectures that perform two multiplications with latency comparable to the latency of a single multiplication. Then, in the second part of this thesis, we investigate the different algorithms for the implementation of elliptic curve scalar multiplication operation. We focus our interest in three aspects, namely, the finite field arithmetic cost, the critical path delay, and the protection strength from side-channel attacks (SCAs) based on simple power analysis. In this regard, we propose a novel scheme for the scalar multiplication operation that is based on processing three bits of the scalar in the exact same sequence of five point arithmetic operations. We analyse the security of our scheme and show that its security holds against both SCAs and safe-error fault attacks. In addition, we show how the properties of the proposed elliptic curve scalar multiplication scheme yields an efficient hardware design for the implementation of a single scalar multiplication on a prime extended twisted Edwards curve incorporating 8 parallel multiplication operations. Our comparison results show that the proposed hardware architecture for the twisted Edwards curve model implemented using the proposed scalar multiplication scheme is the fastest secure SCA protected scalar multiplication scheme over prime field reported in the literature

Customisable arithmetic hardware designs

Imperial Users onl

UpWB: An Uncoupled Architecture Design for White-box Cryptography Using Vectorized Montgomery Multiplication

White-box cryptography (WBC) seeks to protect secret keys even if the attacker has full control over the execution environment. One of the techniques to hide the key is space hardness approach, which conceals the key into a large lookup table generated from a reliable small block cipher. Despite its provable security, space-hard WBC also suffers from heavy performance overhead when executed on general purpose hardware platform, hundreds of magnitude slower than conventional block ciphers. Specifically, recent studies adopt nested substitution permutation network (NSPN) to construct dedicated white-box block cipher [BIT16], whose performance is limited by a massive number of rounds, nested loop dependency and high-dimension dynamic maximal distance separable (MDS) matrices. To address these limitations, we put forward UpWB, an uncoupled and efficient accelerator for NSPN-structure WBC. We propose holistic optimization techniques across timing schedule, algorithms and operators. For the high-level timing schedule, we propose a fine-grained task partition (FTP) mechanism to decouple the parameteroriented nested loop with different trip counts. The FTP mechanism narrows down the idle time for synchronization and avoids the extra usage of FIFO, which efficiently increases the computation throughput. For the optimization of arithmetic operators, we devise a flexible and vectorized modular multiplier (VMM) based on the complexity-reduced Montgomery algorithm, which can process multi-precision variable data, multi-size matrix-vector multiplication and different irreducible polynomials. Then, a configurable matrix-vector multiplication (MVM) architecture with diagonal-major dataflow is presented to handle the dynamic MDS matrix. The multi-scale (Inv)Mixcolumns are also unified in a compact manner by intensively sharing the common sub-operations and customizing the constant multiplier. To verify the proposed methodology, we showcase the unified design implementation for three recent families of WBCs, including SPNbox-8/16/24/32, Yoroi-16/32 and WARX-16. Evaluated on FPGA platform, UpWB outperforms the optimized software counterpart (executed on 3.2 GHz Intel CPU with AES-NI and AVX2 instructions) by 7x to 30x in terms of computation throughput. Synthesized under TSMC 28nm technology, 36x to 164x improvement of computation throughput is achieved when UpWB operates at the maximum frequency of 1.3 GHz and consumes a modest area 0.14 mm2. Besides, the proposed VMM also offers about 30% improvement of area efficiency without pulling flexibility down when compared to state-of-the-art work

Efficient implementation of elliptic curve cryptography.

Elliptic Curve Cryptosystems (ECC) were introduced in 1985 by Neal Koblitz and Victor Miller. Small key size made elliptic curve attractive for public key cryptosystem implementation. This thesis introduces solutions of efficient implementation of ECC in algorithmic level and in computation level. In algorithmic level, a fast parallel elliptic curve scalar multiplication algorithm based on a dual-processor hardware system is developed. The method has an average computation time of n3 Elliptic Curve Point Addition on an n-bit scalar. The improvement is n Elliptic Curve Point Doubling compared to conventional methods. When a proper coordinate system and binary representation for the scalar k is used the average execution time will be as low as n Elliptic Curve Point Doubling, which makes this method about two times faster than conventional single processor multipliers using the same coordinate system. In computation level, a high performance elliptic curve processor (ECP) architecture is presented. The processor uses parallelism in finite field calculation to achieve high speed execution of scalar multiplication algorithm. The architecture relies on compile-time detection rather than of run-time detection of parallelism which results in less hardware. Implemented on FPGA, the proposed processor operates at 66MHz in GF(2 167) and performs scalar multiplication in 100muSec, which is considerably faster than recent implementations.Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2004 .A57. Source: Masters Abstracts International, Volume: 44-03, page: 1446. Thesis (M.A.Sc.)--University of Windsor (Canada), 2005

Bit-parallel word-serial polynomial basis finite field multiplier in GF(2(233)).

Smart card gains extensive uses as a cryptographic hardware in security applications in daily life. The characteristics of smart card require that the cryptographic hardware inside the smart card have the trade-off between area and speed. There are two main public key cryptosystems, these are RSA cryptosystem and elliptic curve (EC) cryptosystem. EC has many advantages compared with RSA such as shorter key length and more suitable for VLSI implementation. Such advantages make EC an ideal candidate for smart card. Finite field multiplier is the key component in EC hardware. In this thesis, bit-parallel word-serial (BPWS) polynomial basis (PB) finite field multipliers are designed. Such architectures trade-off area with speed and are very useful for smart card. An ASIC chip which can perform finite field multiplication and finite field squaring using the BPWS PB finite field multiplier is designed in this thesis. The proposed circuit has been implemented using TSMC 0.18 CMOS technology. A novel 8 x 233 bit-parallel partial product generator is also designed. This new partial product generator has low circuit complexity. The design algorithm can be easily extended to w x m bit-parallel partial product generator for GF(2m).Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2004 .T36. Source: Masters Abstracts International, Volume: 43-01, page: 0286. Advisers: H. Wu; M. Ahmadi. Thesis (M.A.Sc.)--University of Windsor (Canada), 2004

Design And Implementation Of Efficient Multiplier Using Vedic Sutras

The primary target of this venture is to outline a productive excess parallel multiplier utilizing recursive disintegration calculation. By reasonable projection of SFG of proposed calculation and distinguishing appropriate cut-sets for bolster forward cut-set retiming, three novel high-throughput digit-serial RB multipliers are inferred to accomplish altogether less zone time-control complexities than the current ones. It is demonstrated that the proposed high-throughput structures are the best among the relating plans, for FPGA and ASIC execution. This undertaking is actualized by utilizing vedic duplications. Urdhva Tiryakbhyam sutra is utilized for planning this multiplier. Range is fundamental diminishment with this kind of multiplier. Through productive projection of flag stream chart (SFG) of the proposed calculation, a profoundly normal processor-space stream diagram (PSFG) is inferred

Novel algorithms and hardware architectures for Montgomery Multiplication over GF(p)

This report describes the design and implementation results in FPGAs of a scalable hardware architecture for computing modular multiplication in prime fields GF($p$), based on the Montgomery multiplication (MM) algorithm. Starting from an existing digit-serial version of the MM algorithm, a novel {\it digit-digit} based MM algorithm is derived and two hardware architectures that compute that algorithm are described. In the proposed approach, the input operands (multiplicand, multiplier and modulus) are represented using as radix $\beta = 2^k$. Operands of arbitrary size can be multiplied with modular reduction using almost the same hardware since the multiplier\u27s kernel module that performs the modular multiplication depends only on $k$. The novel hardware architectures proposed in this paper were verified by modeling them using VHDL and implementing them in the Xilinx FPGAs Spartan and Virtex5. Design trade-offs are analyzed considering different operand sizes commonly used in cryptography and different values for $k$. The proposed designs for MM are well suited to be implemented in modern FPGAs, making use of available dedicated multiplier and memory blocks reducing drastically the FPGA\u27s standard logic while keeping an acceptable performance compared with other implementation approaches. From the Virtex5 implementation, the proposed MM multiplier reaches a throughput of 242Mbps using only 219 FPGA slices and achieving a 1024-bit modular multiplication in 4.21$\mu$secs

High speed world level finite field multipliers in F2m

Finite fields have important applications in number theory, algebraic geometry, Galois theory, cryptography, and coding theory. Recently, the use of finite field arithmetic in the area of cryptography has increasingly gained importance. Elliptic curve and El-Gamal cryptosystems are two important examples of public key cryptosystems widely used today based on finite field arithmetic. Research in this area is moving toward finding new architectures to implement the arithmetic operations more efficiently. Two types of finite fields are commonly used in practice, prime field GF(p) and the binary extension field GF(2 m). The binary extension fields are attractive for high speed cryptography applications since they are suitable for hardware implementations. Hardware implementation of finite field multipliers can usually be categorized into three categories: bit-serial, bit-parallel, and word-level architectures. The word-level multipliers provide architectural flexibility and trade-off between the performance and limitations of VLSI implementation and I/O ports, thus it is of more practical significance. In this work, different word level architectures for multiplication using binary field are proposed. It has been shown that the proposed architectures are more efficient compared to similar proposals considering area/delay complexities as a measure of performance. Practical size multipliers for cryptography applications have been realized in hardware using FPGA or standard CMOS technology, to similar proposals considering area/delay complexities as a measure of performance. Practical size multipliers for cryptography applications have been realized in hardware using FPGA or standard CMOS technology. Also different VLSI implementations for multipliers were explored which resulted in more efficient implementations for some of the regular architectures. The new implementations use a simple module designed in domino logic as the main building block for the multiplier. Significant speed improvements was achieved designing practical size multipliers using the proposed methodology

Studies on high-speed hardware implementation of cryptographic algorithms

Cryptographic algorithms are ubiquitous in modern communication systems where they have a central role in ensuring information security. This thesis studies efficient implementation of certain widely-used cryptographic algorithms. Cryptographic algorithms are computationally demanding and software-based implementations are often too slow or power consuming which yields a need for hardware implementation. Field Programmable Gate Arrays (FPGAs) are programmable logic devices which have proven to be highly feasible implementation platforms for cryptographic algorithms because they provide both speed and programmability. Hence, the use of FPGAs for cryptography has been intensively studied in the research community and FPGAs are also the primary implementation platforms in this thesis. This thesis presents techniques allowing faster implementations than existing ones. Such techniques are necessary in order to use high-security cryptographic algorithms in applications requiring high data rates, for example, in heavily loaded network servers. The focus is on Advanced Encryption Standard (AES), the most commonly used secret-key cryptographic algorithm, and Elliptic Curve Cryptography (ECC), public-key cryptographic algorithms which have gained popularity in the recent years and are replacing traditional public-key cryptosystems, such as RSA. Because these algorithms are well-defined and widely-used, the results of this thesis can be directly applied in practice. The contributions of this thesis include improvements to both algorithms and techniques for implementing them. Algorithms are modified in order to make them more suitable for hardware implementation, especially, focusing on increasing parallelism. Several FPGA implementations exploiting these modifications are presented in the thesis including some of the fastest implementations available in the literature. The most important contributions of this thesis relate to ECC and, specifically, to a family of elliptic curves providing faster computations called Koblitz curves. The results of this thesis can, in their part, enable increasing use of cryptographic algorithms in various practical applications where high computation speed is an issue