6,718 research outputs found
Dynamic voltage and frequency scaling with multi-clock distribution systems on SPARC core
The current implementation of dynamic voltage and frequency scaling (DVS and DFS) in microprocessors is based on a single clock domain per core. In architectures that adopt Instruction Level Parallelism (ILP), multiple execution units may exist and operate concurrently. Performing DVS and DFS on such cores may result in low utilization and power efficiency. In this thesis, a methodology that implements DVFS with multi Clock distribution Systems (DCS) is applied on a processor core to achieve higher throughput and better power efficiency. DCS replaces the core single clock distribution tree with multi-clock domain systems which, along with dynamic voltage and frequency scaling, creates multiple clock-voltage domains. DCS implements a self-timed interface between the different domains to maintain functionality and ensure data integrity. DCS was implemented on a SPARC core of UltraSPARC T1 architecture, and synthesized targeting TSMC 120nm process technology. Two clock domains were used on SPARC core. The maximum achieved speedup relative to original core was 1.6X. The power consumed by DCS was 0.173mW compared to the core total power of ~ 10W
Per-Core DVFS with Switched-Capacitor Converters for Energy Efficiency in Manycore Processors
Integrating multiple power converters on-chip improves energy efficiency of manycore architectures. Switched-capacitor (SC) dc-dc converters are compatible with conventional CMOS processes, but traditional implementations suffer from limited conversion efficiency. We propose a dynamic voltage and frequency scaling scheme with SC converters that achieves high converter efficiency by allowing the output voltage to ripple and having the processor core frequency track the ripple. Minimum core energy is achieved by hopping between different converter modes and tuning body-bias voltages. A multicore processor model based on a 28-nm technology shows conversion efficiencies of 90% along with over 25% improvement in the overall chip energy efficiency
A Survey of Techniques For Improving Energy Efficiency in Embedded Computing Systems
Recent technological advances have greatly improved the performance and
features of embedded systems. With the number of just mobile devices now
reaching nearly equal to the population of earth, embedded systems have truly
become ubiquitous. These trends, however, have also made the task of managing
their power consumption extremely challenging. In recent years, several
techniques have been proposed to address this issue. In this paper, we survey
the techniques for managing power consumption of embedded systems. We discuss
the need of power management and provide a classification of the techniques on
several important parameters to highlight their similarities and differences.
This paper is intended to help the researchers and application-developers in
gaining insights into the working of power management techniques and designing
even more efficient high-performance embedded systems of tomorrow
Modeling and visualizing networked multi-core embedded software energy consumption
In this report we present a network-level multi-core energy model and a
software development process workflow that allows software developers to
estimate the energy consumption of multi-core embedded programs. This work
focuses on a high performance, cache-less and timing predictable embedded
processor architecture, XS1. Prior modelling work is improved to increase
accuracy, then extended to be parametric with respect to voltage and frequency
scaling (VFS) and then integrated into a larger scale model of a network of
interconnected cores. The modelling is supported by enhancements to an open
source instruction set simulator to provide the first network timing aware
simulations of the target architecture. Simulation based modelling techniques
are combined with methods of results presentation to demonstrate how such work
can be integrated into a software developer's workflow, enabling the developer
to make informed, energy aware coding decisions. A set of single-,
multi-threaded and multi-core benchmarks are used to exercise and evaluate the
models and provide use case examples for how results can be presented and
interpreted. The models all yield accuracy within an average +/-5 % error
margin
Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review
The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER
High-Performance low-vcc in-order core
Power density grows in new technology nodes, thus requiring Vcc to scale especially in mobile platforms where energy is critical. This paper presents a novel approach to decrease Vcc while keeping operating frequency high. Our mechanism is referred to as immediate read after write (IRAW) avoidance. We propose an implementation of the mechanism for an Intel® SilverthorneTM in-order core. Furthermore, we show that our mechanism can be adapted dynamically to provide the highest performance and lowest energy-delay product (EDP) at each Vcc level. Results show that IRAW avoidance increases operating frequency by 57% at 500mV and 99% at 400mV with negligible area and power overhead (below 1%), which translates into large speedups (48% at 500mV and 90% at 400mV) and EDP reductions (0.61 EDP at 500mV and 0.33 at 400mV).Peer ReviewedPostprint (published version
Resource Optimized Scheduling For Enhanced Power Efficiency And Throughput On Chip Multi Processor Platforms
The parallel nature of process execution on Chip Multi-Processors (CMPs) has boosted levels of application performance far beyond the capabilities of erstwhile single-core designs. Generally, CMPs offer improved performance by integrating multiple simpler cores onto a single die that share certain computing resources among them such as last-level caches, data buses, and main memory. This ensures architectural simplicity while also boosting performance for multi-threaded applications. However, a major trade-off associated with this approach is that concurrently executing applications incur performance degradation if their collective resource requirements exceed the total amount of resources available to the system. If dynamic resource allocation is not carefully considered, the potential performance gain from having multiple cores may be outweighed by the losses due to contention for allocation of shared resources. Additionally, CMPs with inbuilt dynamic voltage-frequency scaling (DVFS) mechanisms may try to compensate for the performance bottleneck by scaling to higher clock frequencies. For performance degradation due to shared-resource contention, this does not necessarily improve performance but does ensure a significant penalty on power consumption due to the quadratic relation of electrical power and voltage (P_dynamic ∝ V^2 * f).This dissertation presents novel methodologies for balancing the competing requirements of high performance, fairness of execution, and enforcement of priority, while also ensuring overall power efficiency of CMPs. Specifically, we (1) Analyze the problem of resource interference during concurrent process execution and propose two fine-grained scheduling methodologies for improving overall performance and fairness, (2) Develop an approach for enforcement of priority (i.e., minimum performance) for specific processes while avoiding resource starvation for others, and (3) Present a machine-learning approach for maximizing the power efficiency (performance-per-Watt) of CMPs through estimation of a workload\u27s performance and power consumption limits at different clock frequencies.As modern computing workloads become increasingly dynamic, and computers themselves become increasingly ubiquitous, the problem of finding the ideal balance between performance and power consumption of CMPs is of particular relevance today, especially given the unprecedented proliferation of embedded devices for use in Internet-of-Things, edge computing, smart wearables, and even exotic experiments such as space probes comprised entirely of a CMP, sensors, and an antenna ( space chips ). Additionally, reducing power consumption while maintaining constant performance can contribute to addressing the growing problem of dark silicon
PULP-HD: Accelerating Brain-Inspired High-Dimensional Computing on a Parallel Ultra-Low Power Platform
Computing with high-dimensional (HD) vectors, also referred to as
, is a brain-inspired alternative to computing with
scalars. Key properties of HD computing include a well-defined set of
arithmetic operations on hypervectors, generality, scalability, robustness,
fast learning, and ubiquitous parallel operations. HD computing is about
manipulating and comparing large patterns-binary hypervectors with 10,000
dimensions-making its efficient realization on minimalistic ultra-low-power
platforms challenging. This paper describes HD computing's acceleration and its
optimization of memory accesses and operations on a silicon prototype of the
PULPv3 4-core platform (1.5mm, 2mW), surpassing the state-of-the-art
classification accuracy (on average 92.4%) with simultaneous 3.7
end-to-end speed-up and 2 energy saving compared to its single-core
execution. We further explore the scalability of our accelerator by increasing
the number of inputs and classification window on a new generation of the PULP
architecture featuring bit-manipulation instruction extensions and larger
number of 8 cores. These together enable a near ideal speed-up of 18.4
compared to the single-core PULPv3
An IoT Endpoint System-on-Chip for Secure and Energy-Efficient Near-Sensor Analytics
Near-sensor data analytics is a promising direction for IoT endpoints, as it
minimizes energy spent on communication and reduces network load - but it also
poses security concerns, as valuable data is stored or sent over the network at
various stages of the analytics pipeline. Using encryption to protect sensitive
data at the boundary of the on-chip analytics engine is a way to address data
security issues. To cope with the combined workload of analytics and encryption
in a tight power envelope, we propose Fulmine, a System-on-Chip based on a
tightly-coupled multi-core cluster augmented with specialized blocks for
compute-intensive data processing and encryption functions, supporting software
programmability for regular computing tasks. The Fulmine SoC, fabricated in
65nm technology, consumes less than 20mW on average at 0.8V achieving an
efficiency of up to 70pJ/B in encryption, 50pJ/px in convolution, or up to
25MIPS/mW in software. As a strong argument for real-life flexible application
of our platform, we show experimental results for three secure analytics use
cases: secure autonomous aerial surveillance with a state-of-the-art deep CNN
consuming 3.16pJ per equivalent RISC op; local CNN-based face detection with
secured remote recognition in 5.74pJ/op; and seizure detection with encrypted
data collection from EEG within 12.7pJ/op.Comment: 15 pages, 12 figures, accepted for publication to the IEEE
Transactions on Circuits and Systems - I: Regular Paper
- …