PLC for the smart grid: state-of-the-art and challenges

This paper aims to review systems and applications for power line communications (PLC) in the context of the smart grid. We discuss the main applications and summarise state-of-the-art PLC systems and standards. We report efforts and challenges in channel and noise modelling, as well as in state-of-the-art transmission technology approaches

Implementation of AMI Systems in CFE-Distribution, Mexico

The Smart Grid concept has been conceived as the integration of the electrical grid (generation, transmission and distribution) and the communications network of an electric utility. Although, traditional communications interfaces, protocols and standards has been used in the electrical grid in an isolated manner, modern communications networks are considered as the fundamental enabling technologies within a Smart Grid environment. Emerging communications technologies, protocol architectures and standards can help to build a common communications network infrastructure for data transport between customer premises, power substations, power distribution systems, utility control centers and utility data centers. The Smart Grid will support traditional applications such as supervisory control and data acquisition (SCADA), distribution automation (DA), energy management systems (EMS), demand site management (DSM) and automated meter reading (AMR), etc., as well as new applications like advanced metering infrastructure (AMI), substation automation (SA), microgrids, distributed generation (DG), grid monitoring and control, data storage and analysis, among others. To make this possible, the Smart Grid requires a two-way wide area communications network between different dispersed areas, from generation to consumer premises. An AMI system uses communication technologies for smart meter reading several times a day to get data consumption of electricity, as well as sending outage alarm information and meter tampering almost in real time, from the meter to the control center. Currently, there are various communication technologies to implement AMI systems. This paper presents an overview of the most relevant communications technologies that can be used to implement AMI communications infrastructure such as neighborhood area networks (NAN), field area networks (FAN) and wide area networks (WAN) using different transmission media such as fiber optics, spread spectrum radio frequency, microwave, WiMax, Wi-Fi, ZigBee, cellular, and power line carrier. In addition, a review of the current state of various AMI projects around the world, including the progress in the implementation of AMI systems in Mexico, besides the evaluation performance of CFE´s AMI networks

Electric Vehicles Charging Control based on Future Internet Generic Enablers

In this paper a rationale for the deployment of Future Internet based applications in the field of Electric Vehicles (EVs) smart charging is presented. The focus is on the Connected Device Interface (CDI) Generic Enabler (GE) and the Network Information and Controller (NetIC) GE, which are recognized to have a potential impact on the charging control problem and the configuration of communications networks within reconfigurable clusters of charging points. The CDI GE can be used for capturing the driver feedback in terms of Quality of Experience (QoE) in those situations where the charging power is abruptly limited as a consequence of short term grid needs, like the shedding action asked by the Transmission System Operator to the Distribution System Operator aimed at clearing networks contingencies due to the loss of a transmission line or large wind power fluctuations. The NetIC GE can be used when a master Electric Vehicle Supply Equipment (EVSE) hosts the Load Area Controller, responsible for managing simultaneous charging sessions within a given Load Area (LA); the reconfiguration of distribution grid topology results in shift of EVSEs among LAs, then reallocation of slave EVSEs is needed. Involved actors, equipment, communications and processes are identified through the standardized framework provided by the Smart Grid Architecture Model (SGAM).Comment: To appear in IEEE International Electric Vehicle Conference (IEEE IEVC 2014

Smart Grid Applications for a Practical Implementation of IP over Narrowband Power Line Communications

Abstract Currently, Advanced Metering Infrastructure (AMI) systems have equipped the low voltage section with a communication system that is being used mainly for metering purposes, but it can be further employed for additional applications related to the Smart Grid (SG) concept. This paper explores the potential applications beyond metering of the available channel in a Power Line Communication-based AMI system. To that end, IP has been implemented over Narrow Band-Power Line Communication (NB-PLC) in a real microgrid, which includes an AMI system. A thorough review of potential applications for the SG that might be implemented for this representative case is included in order to provide a realistic analysis of the potentiality of NB-PLC beyond smart metering. The results demonstrate that existing AMI systems based on NB-PLC have the capacity to implement additional applications such as remote commands or status signals, which entails an added value for deployed AMI systems.This work has been partially funded by the Basque Government (IT.683-13 and ELKARTEK KK-2017/00071

Characterization of non-intentional emissions from distributed energy resources up to 500 kHz: A case study in Spain

Narrow Band Power Line Communications (NB-PLC) systems are currently used for smart metering and power quality monitoring as a part of the Smart Grid (SG) concept. However, non-intentional emissions generated by the devices connected to the grid may sometimes disturb the communications and isolate metering equipment. Though some research works have been recently developed to characterize these emissions, most of them have been limited to frequencies below 150 kHz and they are mainly focused on in-house electronic appliances and lightning devices. As NB-PLC can also be allocated in higher frequencies up to 500 kHz, there is still a lack of analysis in this frequency range, especially for emissions from Distributed Energy Resources (DERs). The identification and characterization of the emissions is essential to develop solutions that avoid a negative impact on the proper performance of NB-PLC. In this work, the non-intentional emissions of different types of DERs composing a representative microgrid have been measured in the 35–500 kHz frequency range and analyzed both in time and frequency domains. Different working conditions and coupling and commutation procedures to mains are considered in the analysis. Results are then compared to the limits recommended by regulatory bodies for spurious emissions from communication systems in this frequency band, as no specific limits for DERs have been established. Field measurements show clear differences in the characteristics of non-intentional emissions for different devices, working conditions and coupling procedures and for frequencies below and above 150 kHz. Results of this study demonstrate that a further characterization of the potential emissions from the different types of DERs connected to the grid is required in order to guarantee current and future applications based on NB-PLC.This work has been financially supported in part by the Basque Government (Elkartek program)

Performance evaluation of information and communications technology infrastructure for smart distribution network applications

This thesis was submitted for the degree of Master of Philosophy and awarded by Brunel University.Current electrical networks require secure, scalable and cost-effective Information and Communications Technology (ICT) solutions to facilitate the novel functionalities required by Smart Grids. Countries around the globe are investigating alternative energy sources to mitigate the current energy crisis and environmental issues experienced by many countries due to global warming, rapid growth of population, inefficient energy management, dwindling fossil fuel resources, etc. Therefore, alternative or renewable energy sources, such as wind, solar, hydro, combined heat and power, etc., are required to mitigate such a crisis and such sources will also need to be integrated in to the power grid in a distributed manner. Such distributed energy sources are mainly connected to the distribution networks and introduce huge challenges to the distribution network operator (DNO). Many of these challenges cannot be dealt with effectively using existing network operation mechanisms therefore the research and development of novel ICT solutions to support smart distribution network operation is required. This research investigated suitable ICT solutions to enable the Smart Grid to tackle these challenges and proposes ICT infrastructure models that can be used for simulation studies in order to investigate cost-effective, scalable and secure solutions for the DNOs. Initially, a Quality of Service (QoS) monitoring test-bed was proposed to evaluate the performance of bandwidth intensive applications, such as smart meter data transmission. Simulation studies for different communication technologies, cellular and Power Line Communication (PLC), were also carried out and the simulation models were verified using experimental test results. Finally, the modelling and analysis of smart metering infrastructure was carried out using simulation and extensive studies were performed to evaluate the data transmission rate performance for different configurations of smart meters and concentrators

Characterization of non-intentional emissions from distributed energy resources up to 500 kHz: A case study in Spain

[EN] Narrow Band Power Line Communications (NB-PLC) systems are currently used for smart metering and power quality monitoring as a part of the Smart Grid (SG) concept. However, non-intentional emissions generated by the devices connected to the grid may sometimes disturb the communications and isolate metering equipment. Though some research works have been recently developed to characterize these emissions, most of them have been limited to frequencies below 150 kHz and they are mainly focused on in-house electronic appliances and lightning devices. As NB-PLC can also be allocated in higher frequencies up to 500 kHz, there is still a lack of analysis in this frequency range, especially for emissions from Distributed Energy Resources (DERs). The identification and characterization of the emissions is essential to develop solutions that avoid a negative impact on the proper performance of NB-PLC. In this work, the non-intentional emissions of different types of DERs composing a representative microgrid have been measured in the 35–500 kHz frequency range and analyzed both in time and frequency domains. Different working conditions and coupling and commutation procedures to mains are considered in the analysis. Results are then compared to the limits recommended by regulatory bodies for spurious emissions from communication systems in this frequency band, as no specific limits for DERs have been established. Field measurements show clear differences in the characteristics of non-intentional emissions for different devices, working conditions and coupling procedures and for frequencies below and above 150 kHz. Results of this study demonstrate that a further characterization of the potential emissions from the different types of DERs connected to the grid is required in order to guarantee current and future applications based on NB-PLC.This work has been financially supported in part by the Basque Government (Elkartek program)

Um estudo sobre a tecnologia de transmissão PLC com foco nas smart grids

The Power Line Communication (PLC) technology has a wide variety of applications ranging from a simple communications infrastructure for monitoring systems and residential/industrial control, to broadband internet services. In smart grids context, the transmission of data in the grid can be seen as an alternative to the current system of power grid management, it allows the implementation of a decentralized and flexible electrical system with a wide data network to manage the power consumer and generation. This work is a brief theoretical study on PLC technology and its technical aspects in applications related to data transmission area in smart grid, especially for narrowband transmission in homes. It also presents the design of a PLC data transceiver narrowband that can be used in a conventional power grid. In the end, evaluates the performance of this module in the application's point of view in the context of an AMI (Advanced Metering Infrastructure) system for smart grids. The result show that the PLC technology is reliable and robust if evaluated in indoor (and home area network) context for application in AMI systems. However, its economic viability for this purpose is questionable.CNPq - Conselho Nacional de Desenvolvimento Científico e TecnológicoTrabalho de Conclusão de Curso (Graduação)A tecnologia de comunicação de dados PLC (Power Line Communication) tem uma ampla variedade de aplicações que vão desde uma simples infraestrutura de comunicação para sistemas de monitoramento e controle residencial/industrial, até serviços de internet de banda larga. No contexto das smart grids, a transmissão de dados na rede elétrica é vista como uma alternativa ao sistema atual de gestão da rede elétrica, pois permite a implementação de uma rede descentralizada e flexível. Este trabalho faz um breve estudo teórico sobre a tecnologia PLC e seus aspectos técnicos em aplicações voltadas a área de transmissão de dados em smart grid, especialmente para transmissão em banda estreita em ambientes domésticos. Ainda, apresenta o projeto de um transceptor de dados PLC de banda estreita que pode ser usado em uma rede elétrica convencional. Ao final, avalia o desempenho deste módulo sob a ótica da aplicação no contexto de um sistema AMI (Advanced Metering Infrastructure) para smart grids. Os resultados mostram que sob o ponto de vista tecnológico a transmissão PLC é confiável e relativamente robusta no ambiente e contexto avaliados (para aplicação em um sistema AMI). Contudo, sua viabilidade econômica para este tipo de aplicação é questionável