Multimodal interface for an intelligent wheelchair

Tese de mestrado integrado. Engenharia Informática e Computação. Universidade do Porto. Faculdade de Engenharia. 201

Overcoming barriers and increasing independence: service robots for elderly and disabled people

This paper discusses the potential for service robots to overcome barriers and increase independence of elderly and disabled people. It includes a brief overview of the existing uses of service robots by disabled and elderly people and advances in technology which will make new uses possible and provides suggestions for some of these new applications. The paper also considers the design and other conditions to be met for user acceptance. It also discusses the complementarity of assistive service robots and personal assistance and considers the types of applications and users for which service robots are and are not suitable

Evaluation of distinct input methods of an intelligent wheelchair in simulated and real environments: a performance and usability study

This paper focuses on evaluating the usability of an Intelligent Wheelchair (IW) in both real and simulated environments. The wheelchair is controlled at a high-level by a flexible multimodal interface, using voice commands, facial expressions, head movements and joystick as its main inputs. A Quasi-experimental design was applied including a deterministic sample with a questionnaire that enabled to apply the System Usability Scale. The subjects were divided in two independent samples: 46 individuals performing the experiment with an Intelligent Wheelchair in a simulated environment (28 using different commands in a sequential way and 18 with the liberty to choose the command); 12 individuals performing the experiment with a real IW. The main conclusion achieved by this study is that the usability of the Intelligent Wheelchair in a real environment is higher than in the simulated environment. However there were not statistical evidences to affirm that there are differences between the real and simulated wheelchairs in terms of safety and control. Also, most of users considered the multimodal way of driving the wheelchair very practical and satisfactory. Thus, it may be concluded that the multimodal interfaces enables very easy and safe control of the IW both in simulated and real environments

A Methodology for Creating an Adapted Command Language for Driving an Intelligent Wheelchair

Intelligent wheelchairs (IW) are technologies that can increase the autonomy and independence of elderly people and patients suffering from some kind of disability. Nowadays the intelligent wheelchairs and the human-machine studies are very active research areas. This paper presents a methodology and a Data Analysis System (DAS) that provides an adapted command language to an user of the IW. This command language is a set of input sequences that can be created using inputs from an input device or a combination of the inputs available in a multimodal interface. The results show that there are statistical evidences to affirm that the mean of the evaluation of the DAS generated command language is higher than the mean of the evaluation of the command language recommended by the health specialist (p value = 0.002) with a sample of 11 cerebral palsy users. This work demonstrates that it is possible to adapt an intelligent wheelchair interface to the user even when the users present heterogeneous and severe physical constraints

Multimodal interface for an intelligent wheelchair

Tese de mestrado integrado. Engenharia Electrotécnica e de Computadores (Major Automação). Faculdade de Engenharia. Universidade do Porto. 200

Adapted control methods for cerebral palsy users of an intelligent wheelchair

The development of an intelligent wheelchair (IW) platform that may be easily adapted to any commercial electric powered wheelchair and aid any person with special mobility needs is the main objective of this project. To be able to achieve this main objective, three distinct control methods were implemented in the IW: manual, shared and automatic. Several algorithms were developed for each of these control methods. This paper presents three of the most significant of those algorithms with emphasis on the shared control method. Experiments were performed by users suffering from cerebral palsy, using a realistic simulator, in order to validate the approach. The experiments revealed the importance of using shared (aided) controls for users with severe disabilities. The patients still felt having complete control over the wheelchair movement when using a shared control at a 50% level and thus this control type was very well accepted. Thus it may be used in intelligent wheelchairs since it is able to correct the direction in case of involuntary movements of the user but still gives him a sense of complete control over the IW movement

Assistente de navegação com apontador laser para conduzir cadeiras de rodas robotizadas

Orientador: Eric RohmerDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de ComputaçãoResumo: As soluções de robótica assistida ajudam as pessoas a recuperar sua mobilidade e autonomia perdidas em suas vidas diárias. Este documento apresenta um assistente de navegação de baixo custo projetado para pessoas tetraplégicas para dirigir uma cadeira de rodas robotizada usando a combinação da orientação da cabeça e expressões faciais (sorriso e sobrancelhas para cima) para enviar comandos para a cadeira. O assistente fornece dois modos de navegação: manual e semi-autônomo. Na navegação manual, uma webcam normal com o algoritmo OpenFace detecta a orientação da cabeça do usuário e expressões faciais (sorriso, sobrancelhas para cima) para compor comandos e atuar diretamente nos movimentos da cadeira de rodas (parar, ir à frente, virar à direita, virar à esquerda). No modo semi-autônomo, o usuário controla um laser pan-tilt com a cabeça para apontar o destino desejado no solo e valida com o comando sobrancelhas para cima que faz com que a cadeira de rodas robotizada realize uma rotação seguida de um deslocamento linear para o alvo escolhido. Embora o assistente precise de melhorias, os resultados mostraram que essa solução pode ser uma tecnologia promissora para pessoas paralisadas do pescoço para controlar uma cadeira de rodas robotizadaAbstract: Assistive robotics solutions help people to recover their lost mobility and autonomy in their daily life. This document presents a low-cost navigation assistant designed for people paralyzed from down the neck to drive a robotized wheelchair using the combination of the head's posture and facial expressions (smile and eyebrows up) to send commands to the chair. The assistant provides two navigation modes: manual and semi-autonomous. In the manual navigation, a regular webcam with the OpenFace algorithm detects the user's head orientation and facial expressions (smile, eyebrows up) to compose commands and actuate directly on the wheelchair movements (stop, go front, turn right, turn left). In the semi-autonomous, the user controls a pan-tilt laser with his/her head to point the desired destination on the ground and validates with eyebrows up command which makes the robotized wheelchair performs a rotation followed by a linear displacement to the chosen target. Although the assistant need improvements, results have shown that this solution may be a promising technology for people paralyzed from down the neck to control a robotized wheelchairMestradoEngenharia de ComputaçãoMestre em Engenharia ElétricaCAPE

A Low-Cost Tele-Presence Wheelchair System

This paper presents the architecture and implementation of a tele-presence wheelchair system based on tele-presence robot, intelligent wheelchair, and touch screen technologies. The tele-presence wheelchair system consists of a commercial electric wheelchair, an add-on tele-presence interaction module, and a touchable live video image based user interface (called TIUI). The tele-presence interaction module is used to provide video-chatting for an elderly or disabled person with the family members or caregivers, and also captures the live video of an environment for tele-operation and semi-autonomous navigation. The user interface developed in our lab allows an operator to access the system anywhere and directly touch the live video image of the wheelchair to push it as if he/she did it in the presence. This paper also discusses the evaluation of the user experience

Estratégias de controle de trajetórias para cadeira de rodas robotizadas

Orientador: Eleri CardozoDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de ComputaçãoResumo: Desde os anos 80, diversos trabalhos foram publicados com o objetivo de propor soluções alternativas para usuários de cadeira de rodas motorizadas com severa deficiência motora e que não possuam capacidade de operar um joystick mecânico. Dentre essas soluções estão interfaces assistivas que auxiliam no comando da cadeira de rodas através de diversos mecanismos como expressões faciais, interfaces cérebro-computador, e rastreamento de olho. Além disso, as cadeiras de rodas ganharam certa autonomia para realizar determinadas tarefas que vão de desviar de obstáculos, abrir portas e até planejar e executar rotas. Para que estas tarefas possam ser executadas, é necessário que as cadeiras de rodas tenham estruturas não convencionais, habilidade de sensoriamento do ambiente e estratégias de controle de locomoção. O objetivo principal é disponibilizar uma cadeira de rodas que ofereça conforto ao usuário e que possua um condução segura não importando o tipo de deficiência do usuário. Entretanto, durante a condução da cadeira de rodas, o desalinhamento das rodas castores podem oferecer certo perigo ao usuário, uma vez que, dependendo da maneira em que elas estejam orientadas, instabilidades podem ocorrer, culminando em acidentes. Da mesma forma, o desalinhamento das rodas castores é considerado um dos principais causadores de desvios de trajetória que ocorrem durante a movimentação da cadeira de rodas, juntamente com diferentes distribuições de pesos ou diferentes atritos entre as rodas e o chão. Nesta dissertação, é considerado apenas o desalinhamento das rodas castores como único causador de desvio de trajetória da cadeira de rodas e, dessa forma, são propostas soluções que possam reduzir ou até mesmo eliminar o efeito deste desalinhamento. Com a implementação das melhores soluções desenvolvidas neste trabalho, é possível fazer com que diversas interfaces assistivas que têm baixa taxa de comandos possam ser utilizadas, uma vez que o usuário não precisa, constantemente, corrigir o desvio da trajetória desejada. Ademais, é elaborado um novo projeto de cadeira de rodas "inteligente" para a implementação das técnicas desenvolvidas neste trabalhoAbstract: Since the 1980s several works were published proposing alternative solutions for users of powered wheelchairs with severe mobility impairments and that are not able to operate a mechanical joystick. Such solutions commonly focus on assistive interfaces that help commanding the wheelchair through distinct mechanisms such as facial expressions, brain-computer interfaces, and eye tracking. Besides that, the wheelchairs have achieved a certain level of autonomy to accomplish determined tasks such as obstacle avoidance, doors opening and even path planning and execution. For these tasks to be performed, it is necessary the wheelchairs to have a non conventional designs, ability to sense the environment and locomotion control strategies. The ultimate objective is to offer a comfortable and safe conduction no matter the user's mobility impairments. However, while driving the wheelchair, the caster wheels' misalignment might offer risks to the user, because, depending on the way they are initially oriented, instabilities may occur causing accidents. Similarly, the caster wheels' misalignment can be considered, among others like different weight distribution or different friction between wheel and floor, one of the main causes of path deviation from the intended trajectory while the wheelchair is moving. In this dissertation, it is considered the caster wheels' misalignment as the unique generator of wheelchair path deviation and, therefore, it is proposed different solutions in order to reduce or even eliminate the effects of the misalignment. The implementation of the best solutions developed in this work allows assistive interfaces with low rate of commands to be widespread, once the user does not need to, constantly, correct path deviation. Additionally, a new smart wheelchair project is elaborated for the implementation of the techniques developed in this workMestradoEngenharia de ComputaçãoMestre em Engenharia Elétrica88882.329382/2019-01CAPE