Un/DoPack: Re-Clustering of Large System-on-Chip Designs with Interconnect Variation for Low-Cost FPGAs

{ marvint | davel | lemieux} @ ece.ubc.ca FPGA device area is dominated by interconnect, so low-cost FPGA architectures often have reduced interconnect capacity. This limited routing capacity creates a hard channel width constraint that can make it difficult for CAD tools to successfully map a circuit into these devices. Instead of migrating a design to a high-cost, resource-rich architecture that is easier to route, we present a cheaper alternative: a fully automated CAD flow (Un/DoPack) that finds local regions of high interconnect demand and reduces it by spreading out the logic in that region. This is done by introducing whitespace in the form of empty logic elements (LEs) within the configurable logic blocks (CLBs) of the congested region. After spreading, the congested region occupies more routing channels and so obtains access to greater aggregat

NONLINEAR OPERATORS FOR IMAGE PROCESSING: DESIGN, IMPLEMENTATION AND MODELING TECHNIQUES FOR POWER ESTIMATION

1998/1999Negli ultimi anni passati le applicazioni multimediali hanno visto uno sviluppo notevole, trovando applicazione in un gran numero di campi. Applicazioni come video conferenze, diagnostica medica, telefonia mobile e applicazioni militari necessitano il trattamento di una gran mole di dati ad alta velocità. Pertanto, l'elaborazione di immagini e di dati vocali è molto importante ed è stata oggetto di numerosi sforzi, nel tentativo di trovare algoritmi sempre più veloci ed efficaci. Tra gli algoritmi proposti, noi crediamo che gli operatori razionali svolgano un ruolo molto importante, grazie alla loro versatilità ed efficacia nell'elaborazione di dati. Negli ultimi anni sono stati proposti diversi algoritmi, dimostrando che questi operatori possono essere molto vantaggiosi in diverse applicazioni, producendo buoni risultati. Lo scopo di questo lavoro è di realizzare alcuni di questi algoritmi e, quindi, dimostrare che i filtri razionali, in particolare, possono essere realizzati senza ricorrere a sistemi di grandi dimensioni e possono raggiungere frequenze operative molto alte. Una volta che il blocco fondamentale di un sistema basato su operatori razionali sia stato realizzato, esso pu6 essere riusato con successo in molte altre applicazioni. Dal punto di vista del progettista, è importante avere uno schema generale di studio, che lo renda capace di studiare le varie configurazioni del sistema da realizzare e di analizzare i compromessi tra le variabili di progetto. In particolare, per soddisfare l'esigenza di metodi versatili per la stima della potenza, abbiamo sviluppato una tecnica di macro modellizazione che permette al progettista di stimare velocemente ed accuratamente la potenza dissipata da un circuito. La tesi è organizzata come segue: Nel Capitolo 1 alcuni sono presentati alcuni algoritmi studiati per la realizzazione. Ne viene data solo una veloce descrizione, lasciando comunque al lettore interessato dei riferimenti bibliografici. Nel Capitolo 2 vengono discusse le architetture fondamentali usate per la realizzazione. Principalmente sono state usate architetture a pipeline, ma viene data anche una descrizione degli approcci oggigiorno disponibili per l'ottimizzazione delle temporizzazioni. Nel Capitolo 3 sono presentate le realizzazioni di due sistemi studiati per questa tesi. Gli approcci seguiti si basano su ASIC e FPGA. Richiedono tecniche e soluzioni diverse per il progetto del sistema, per cui é interessante vedere cosa pu6 essere fatto nei due casi. Infine, nel Capitolo 4, descriviamo la nostra tecnica di macro modellizazione per la stima di potenza, dando una breve visione delle tecniche finora proposte e facendo vedere quali sono i vantaggi che il nostro metodo comporta per il progetto.In the past few years, multimedia application have been growing very fast, being applied to a large variety of fields. Applications like video conference, medical diagnostic, mobile phones, military applications require to handle large amount of data at high rate. Images as well as voice data processing are therefore very important and they have been subjected to a lot of efforts in order to find always faster and effective algorithms. Among image processing algorithms, we believe that rational operators assume an important role, due to their versatility and effectiveness in data processing. In the last years, several algorithms have been proposed, demonstrating that these operators can be very suitable in different applications with very good results. The aim of this work is to implement some of these algorithm and, therefore, demonstrate that rational filters, in particular, can be implemented without requiring large sized systems and they can operate at very high frequencies. Once the basic building block of a rational based system has been implemented, it can be successfully reused in many other applications. From the designer point of view, it is important to have a general framework, which makes it able to study various configurations of the system to be implemented and analyse the trade-off among the design variables. In particular, to meet the need far versatile tools far power estimation, we developed a new macro modelling technique, which allows the designer to estimate the power dissipated by a circuit quickly and accurately. The thesis is organized as follows: In chapter 1 we present some of the algorithms which have been studied for implementation. Only a brief overview is given, leaving to the interested reader some references in literature. In chapter 2 we discuss the basic architectures used for the implementations. Pipelined structures have been mainly used for this thesis, but an overview of the nowaday available approaches for timing optimization is presented. In chapter 3 we present two of the implementation designed for this thesis. The approaches followed are ASIC driven and FPGA drive. They require different techniques and different solution for the design of the system, therefore it is interesting to see what can be done in both the cases. Finally, in chapter 4, we describe our macro modelling techniques for power estimation, giving a brief overview of the up to now proposed techniques and showing the advantages our method brings to the design.XII Ciclo1969Versione digitalizzata della tesi di dottorato cartacea

Automatic generation of high-throughput systolic tree-based solvers for modern FPGAs

Tree-based models are a class of numerical methods widely used in financial option pricing, which have a computational complexity that is quadratic with respect to the solution accuracy. Previous research has employed reconfigurable computing with small degrees of parallelism to provide faster hardware solutions compared with general-purpose processing software designs. However, due to the nature of their vector hardware architectures, they cannot scale their compute resources efficiently, leaving them with pricing latency figures which are quadratic with respect to the problem size, and hence to the solution accuracy. Also, their solutions are not productive as they require hardware engineering effort, and can only solve one type of tree problems, known as the standard American option. This thesis presents a novel methodology in the form of a high-level design framework which can capture any common tree-based problem, and automatically generates high-throughput field-programmable gate array (FPGA) solvers based on proposed scalable hardware architectures. The thesis has made three main contributions. First, systolic architectures were proposed for solving binomial and trinomial trees, which due to their custom systolic data-movement mechanisms, can scale their compute resources efficiently to provide linear latency scaling for medium-size trees and improved quadratic latency scaling for large trees. Using the proposed systolic architectures, throughput speed-ups of up to 5.6X and 12X were achieved for modern FPGAs, compared to previous vector designs, for medium and large trees, respectively. Second, a productive high-level design framework was proposed, that can capture any common binomial and trinomial tree problem, and a methodology was suggested to generate high-throughput systolic solvers with custom data precision, where the methodology requires no hardware design effort from the end user. Third, a fully-automated tool-chain methodology was proposed that, compared to previous tree-based solvers, improves user productivity by removing the manual engineering effort of applying the design framework to option pricing problems. Using the productive design framework, high-throughput systolic FPGA solvers have been automatically generated from simple end-user C descriptions for several tree problems, such as American, Bermudan, and barrier options.Open Acces

Techniques de routage pseudo-aléatoire pour une application micro-électronique

Résumé La problématique de routage est très actuelle. On en trouve des applications dans les GPS, les prévisions de trafic routier, mais aussi pour le prototypage sur FPGA, la fabrication de puces électroniques ou le trafic TCP/IP sur Internet. On trouve des publications sur le sujet depuis plusieurs dizaines d'années, mais on observe actuellement une recrudescence confirmant l'actualité, l'importance et la complexité de ce problème. Cette thèse concerne le routage et ses ressources pour une application dans un nouveau type de système micro-électronique, nommé le WaferBoardTM . Son noyau consiste en un circuit électronique intégré à l'échelle d'une tranche de silicium (wafer). Peu d'applications commerciales de la micro-électronique ont exploité ce niveau d'intégration. Ce système de prototypage rapide vise à réduire d'un ou deux ordres de grandeur le temps de développement de systèmes électroniques. Il nécessite un ensemble d'outils logiciel de support, dont un outil de routage très rapide, capable de produire des solutions valables en des temps de l'ordre de la minute, et de certaines fonctionnalités spécifiques, l'équilibrage de délai ou le reroutage à la volée, au sein d'une netlist déjà routée. La problématique de routage pour cette application peut être imagée comme suit. Étant donné un réseau routier régulier (les routes d’Amériques du Nord en version cartésienne par exemple) et 100,000 voitures au départ lundi à 8h a.m. dans tout le pays avec des sources et destinations très variées; calculer les chemins pour toutes les voitures de telle sorte qu'aucune ne prenne la même route dans la journée. Il est 7h59 a.m, vous avez 1 minute, et des ponts sont inaccessibles pour travaux, en voici la liste. Cet exemple simpliste donne une idée des ordres de grandeurs de la problématique de routage que l'on cherche à résoudre pour cette application. Un algorithme de routage prend en paramètres deux structures de données : un graphe (ou réseau d'interconnexions) constitué de n\oe{}uds (sommets) et d'arcsUn arc relie deux sommets du graphe, et une netlistDans ce contexte, un netlist réfère à une liste d'interconnexions entre composants, liste de n\oe{}uds électriques dont les points de départ et d'arrivée sont positionnés géographiquement. Ainsi, au lieu de voitures, il s'agit de router des signaux électriques dont les points de départ et d'arrivée sont dictés par la position des broches des composants placés sur le système de prototypage. Un réseau régulier maillé mufti-dimensionnel (plus généralement appelé « réseau d'interconnexions ») sert de réseau routier dont certaines routes sont défectueuses, des ponts inaccessibles. En effet, le réseau d'interconnexions est un circuit électronique intégré à l'échelle d'une tranche de silicium complète, ce qui implique la présence de défectuosités au sein de chaque circuit fabriqué. Contrairement aux circuits électroniques classiques, où chacun est testé et les défectueux écartés, une intégration à l'échelle de la tranche demande de fortes redondances au sein du circuit pour minimiser le taux de rejets. Pour l'application du WaferBoard, un certain nombre d'éléments du réseau d'interconnexions seront fort probablement défectueux sur chaque circuit produit; l'algorithme de routage se doit de prendre en compte ces éléments très particuliers. Cette contrainte ne se retrouve pas dans les applications plus classiques des routeurs que l'on retrouve dans les PCB, circuits FPGA ou circuits VLSI. D'autres contraintes s'appliquent à ce projet particulier : la latence induite par la technologie est environ un ordre de grandeur plus importante que celle dans les circuits sur PCB, ce qui impose un routage orienté vers sa réduction.----------Abstract The routing problem is very actual. Applications are found in GPS, road traffic forecast, but also for prototyping on FPGA, or TCP/IP traffic on the Internet. Publications on the subject have existed for several decades, but new publications keep appearing, confirming the importance and complexity of the problem. This thesis deals with routing and the resources it requires for a new category of micro-electronic applications, called the WaferBoard. It is an electronic circuit integrated at the wafer scale. Few commercial applications of micro-electronics have exploited this level of integration. This rapid prototyping system aims at reducing by one or two orders of magnitude the development time of digital circuits. It requires a very fast routing tool, capable of producing viable solutions in a few minutes, with dedicated functionality such as balancing delays and rerouting on the fly parts of a netlist. The routing problem for this application can be pictured as follows. Given a regular road network of the size of north america, if 100.000 cars were to start Monday 8 a.m. across the continent with a wide variety of sources and destinations; the challenge is to compute paths for all cars so none of them take the same route that day. It is 7:59 am, you have 1 minute, and some bridges are under road work: here is the list. This simplistic example gives an idea of the orders of magnitude of the problem that need to be solved for this application. A routing algorithm takes as input: a graph (or interconnection network) made of nodes and edges, and a netlst, a list of electrical nodes with starting and ending points physically placed. Therefore, instead of cars, the problem consists of routing electrical signals with points of departure and arrival dictated by the pin position of components placed on the prototyping system. A regular, multi-dimensional mesh (also called "interconnection network") serves as a road network, which contains defective roads and inaccessible bridges. Indeed, the interconnection network is an electronic circuit integrated across a full wafer, implying the presence of defects within each manufactured circuit. Unlike conventional electronic circuits, where each is tested and defective ones are set apart, wafer scale integrated applications require lots of redundancy in the circuit to minimize the rejection rate. In the WaferBoard, a number of elements of the interconnection network will be defective in each circuit; the routing algorithm must take into account these very specific elements. This constraint is not found in the classic applications of routers found in PCB, FPGA or VLSI circuits. Other restrictions apply to this particular project: the latency induced by the technology is about one order of magnitude greater than that in the circuits of PCBs, which requires a routing oriented towards computation time reduction. This constraint partly explains the network architecture used. Within the WaferIC, the shortest distance is not necessarily the one that offers the smallest latency. This property of the network complexifies the routing problem. Balancing delays within a group of arbitrary size nets is a necessary feature of the routing algorithm, and the difficulty is amplified by the computation time limit. Indeed, the interest of the application is to reduce the time for a user to test a circuit: the time of setup is extremely short, and estimated at a few minutes only

Energy efficient enabling technologies for semantic video processing on mobile devices

Semantic object-based processing will play an increasingly important role in future multimedia systems due to the ubiquity of digital multimedia capture/playback technologies and increasing storage capacity. Although the object based paradigm has many undeniable benefits, numerous technical challenges remain before the applications becomes pervasive, particularly on computational constrained mobile devices. A fundamental issue is the ill-posed problem of semantic object segmentation. Furthermore, on battery powered mobile computing devices, the additional algorithmic complexity of semantic object based processing compared to conventional video processing is highly undesirable both from a real-time operation and battery life perspective. This thesis attempts to tackle these issues by firstly constraining the solution space and focusing on the human face as a primary semantic concept of use to users of mobile devices. A novel face detection algorithm is proposed, which from the outset was designed to be amenable to be offloaded from the host microprocessor to dedicated hardware, thereby providing real-time performance and reducing power consumption. The algorithm uses an Artificial Neural Network (ANN), whose topology and weights are evolved via a genetic algorithm (GA). The computational burden of the ANN evaluation is offloaded to a dedicated hardware accelerator, which is capable of processing any evolved network topology. Efficient arithmetic circuitry, which leverages modified Booth recoding, column compressors and carry save adders, is adopted throughout the design. To tackle the increased computational costs associated with object tracking or object based shape encoding, a novel energy efficient binary motion estimation architecture is proposed. Energy is reduced in the proposed motion estimation architecture by minimising the redundant operations inherent in the binary data. Both architectures are shown to compare favourable with the relevant prior art

MOCAST 2021

The 10th International Conference on Modern Circuit and System Technologies on Electronics and Communications (MOCAST 2021) will take place in Thessaloniki, Greece, from July 5th to July 7th, 2021. The MOCAST technical program includes all aspects of circuit and system technologies, from modeling to design, verification, implementation, and application. This Special Issue presents extended versions of top-ranking papers in the conference. The topics of MOCAST include:Analog/RF and mixed signal circuits;Digital circuits and systems design;Nonlinear circuits and systems;Device and circuit modeling;High-performance embedded systems;Systems and applications;Sensors and systems;Machine learning and AI applications;Communication; Network systems;Power management;Imagers, MEMS, medical, and displays;Radiation front ends (nuclear and space application);Education in circuits, systems, and communications

Développement des techniques de test et de diagnostic pour les FPGA hiérarchique de type mesh

The evolution trend of shrinking feature size and increasing complexity in modern electronics is being slowed down due to physical limits that generate numerous imperfections and defects during fabrication steps or projected life time of the chip. Field Programmable Gate Arrays (FPGAs) are used in complex digital systems mainly due to their reconfigurability and shorter time-to-market. To maintain a high reliability of such systems, FPGAs should be tested thoroughly for defects. FPGA architecture optimization for area saving and better signal routability is an ongoing process which directly impacts the overall FPGA testability, hence the reliability. This thesis presents a complete strategy for test and diagnosis of manufacturing defects in mesh-based FPGAs containing a novel multilevel interconnects topology which promises to provide better area and routability. Efficiency of the proposed test schemes is analyzed in terms of test cost, respective fault coverage and diagnostic resolution.L’évolution tendant à réduire la taille et augmenter la complexité des circuits électroniques modernes, est en train de ralentir du fait des limitations technologiques, qui génèrent beaucoup de d’imperfections et de defaults durant la fabrication ou la durée de vie de la puce. Les FPGAs sont utilisés dans les systèmes numériques complexes, essentiellement parce qu’ils sont reconfigurables et rapide à commercialiser. Pour garder une grande fiabilité de tels systèmes, les FPGAs doivent être testés minutieusement pour les defaults. L’optimisation de l’architecture des FPGAs pour l’économie de surface et une meilleure routabilité est un processus continue qui impacte directement la testabilité globale et de ce fait, la fiabilité. Cette thèse présente une stratégie complète pour le test et le diagnostique des defaults de fabrication des “mesh-based FPGA” contenant une nouvelle topologie d’interconnections à plusieurs niveaux, ce qui promet d’apporter une meilleure routabilité. Efficacité des schémas proposes est analysée en termes de temps de test, couverture de faute et résolution de diagnostique