316 research outputs found
Joint Pilot Design and Uplink Power Allocation in Multi-Cell Massive MIMO Systems
This paper considers pilot design to mitigate pilot contamination and provide
good service for everyone in multi-cell Massive multiple input multiple output
(MIMO) systems. Instead of modeling the pilot design as a combinatorial
assignment problem, as in prior works, we express the pilot signals using a
pilot basis and treat the associated power coefficients as continuous
optimization variables. We compute a lower bound on the uplink capacity for
Rayleigh fading channels with maximum ratio detection that applies with
arbitrary pilot signals. We further formulate the max-min fairness problem
under power budget constraints, with the pilot signals and data powers as
optimization variables. Because this optimization problem is non-deterministic
polynomial-time hard due to signomial constraints, we then propose an algorithm
to obtain a local optimum with polynomial complexity. Our framework serves as a
benchmark for pilot design in scenarios with either ideal or non-ideal
hardware. Numerical results manifest that the proposed optimization algorithms
are close to the optimal solution obtained by exhaustive search for different
pilot assignments and the new pilot structure and optimization bring large
gains over the state-of-the-art suboptimal pilot design.Comment: 16 pages, 8 figures. Accepted to publish at IEEE Transactions on
Wireless Communication
A Random Access Protocol for Pilot Allocation in Crowded Massive MIMO Systems
The Massive MIMO (multiple-input multiple-output) technology has great
potential to manage the rapid growth of wireless data traffic. Massive MIMO
achieves tremendous spectral efficiency by spatial multiplexing of many tens of
user equipments (UEs). These gains are only achieved in practice if many more
UEs can connect efficiently to the network than today. As the number of UEs
increases, while each UE intermittently accesses the network, the random access
functionality becomes essential to share the limited number of pilots among the
UEs. In this paper, we revisit the random access problem in the Massive MIMO
context and develop a reengineered protocol, termed strongest-user collision
resolution (SUCRe). An accessing UE asks for a dedicated pilot by sending an
uncoordinated random access pilot, with a risk that other UEs send the same
pilot. The favorable propagation of Massive MIMO channels is utilized to enable
distributed collision detection at each UE, thereby determining the strength of
the contenders' signals and deciding to repeat the pilot if the UE judges that
its signal at the receiver is the strongest. The SUCRe protocol resolves the
vast majority of all pilot collisions in crowded urban scenarios and continues
to admit UEs efficiently in overloaded networks.Comment: To appear in IEEE Transactions on Wireless Communications, 16 pages,
10 figures. This is reproducible research with simulation code available at
https://github.com/emilbjornson/sucre-protoco
Toward Massive MIMO 2.0: Understanding Spatial Correlation, Interference Suppression, and Pilot Contamination
Since the seminal paper by Marzetta from 2010, Massive MIMO has changed from being a theoretical concept with an infinite number of antennas to a practical technology. The key concepts are adopted into the 5G New Radio Standard and base stations (BSs) with M = 64 fully digital transceivers have been commercially deployed in sub-6GHz bands. The fast progress was enabled by many solid research contributions of which the vast majority assume spatially uncorrelated channels and signal processing schemes developed for single-cell operation. These assumptions make the performance analysis and optimization of Massive MIMO tractable but have three major caveats: 1) practical channels are spatially correlated; 2) large performance gains can be obtained by multicell processing, without BS cooperation; 3) the interference caused by pilot contamination creates a finite capacity limit, as M → ∞. There is a thin line of papers that avoided these caveats, but the results are easily missed. Hence, this tutorial article explains the importance of considering spatial channel correlation and using signal processing schemes designed for multicell networks. We present recent results on the fundamental limits of Massive MIMO, which are not determined by pilot contamination but the ability to acquire channel statistics. These results will guide the journey towards the next level of Massive MIMO, which we call "Massive MIMO 2.0"
Ubiquitous Cell-Free Massive MIMO Communications
Since the first cellular networks were trialled in the 1970s, we have
witnessed an incredible wireless revolution. From 1G to 4G, the massive traffic
growth has been managed by a combination of wider bandwidths, refined radio
interfaces, and network densification, namely increasing the number of antennas
per site. Due its cost-efficiency, the latter has contributed the most. Massive
MIMO (multiple-input multiple-output) is a key 5G technology that uses massive
antenna arrays to provide a very high beamforming gain and spatially
multiplexing of users, and hence, increases the spectral and energy efficiency.
It constitutes a centralized solution to densify a network, and its performance
is limited by the inter-cell interference inherent in its cell-centric design.
Conversely, ubiquitous cell-free Massive MIMO refers to a distributed Massive
MIMO system implementing coherent user-centric transmission to overcome the
inter-cell interference limitation in cellular networks and provide additional
macro-diversity. These features, combined with the system scalability inherent
in the Massive MIMO design, distinguishes ubiquitous cell-free Massive MIMO
from prior coordinated distributed wireless systems. In this article, we
investigate the enormous potential of this promising technology while
addressing practical deployment issues to deal with the increased
back/front-hauling overhead deriving from the signal co-processing.Comment: Published in EURASIP Journal on Wireless Communications and
Networking on August 5, 201
A Generalized Framework on Beamformer Design and CSI Acquisition for Single-Carrier Massive MIMO Systems in Millimeter Wave Channels
In this paper, we establish a general framework on the reduced dimensional
channel state information (CSI) estimation and pre-beamformer design for
frequency-selective massive multiple-input multiple-output MIMO systems
employing single-carrier (SC) modulation in time division duplex (TDD) mode by
exploiting the joint angle-delay domain channel sparsity in millimeter (mm)
wave frequencies. First, based on a generic subspace projection taking the
joint angle-delay power profile and user-grouping into account, the reduced
rank minimum mean square error (RR-MMSE) instantaneous CSI estimator is derived
for spatially correlated wideband MIMO channels. Second, the statistical
pre-beamformer design is considered for frequency-selective SC massive MIMO
channels. We examine the dimension reduction problem and subspace (beamspace)
construction on which the RR-MMSE estimation can be realized as accurately as
possible. Finally, a spatio-temporal domain correlator type reduced rank
channel estimator, as an approximation of the RR-MMSE estimate, is obtained by
carrying out least square (LS) estimation in a proper reduced dimensional
beamspace. It is observed that the proposed techniques show remarkable
robustness to the pilot interference (or contamination) with a significant
reduction in pilot overhead
- …