SceneFlowFields: Dense Interpolation of Sparse Scene Flow Correspondences

While most scene flow methods use either variational optimization or a strong rigid motion assumption, we show for the first time that scene flow can also be estimated by dense interpolation of sparse matches. To this end, we find sparse matches across two stereo image pairs that are detected without any prior regularization and perform dense interpolation preserving geometric and motion boundaries by using edge information. A few iterations of variational energy minimization are performed to refine our results, which are thoroughly evaluated on the KITTI benchmark and additionally compared to state-of-the-art on MPI Sintel. For application in an automotive context, we further show that an optional ego-motion model helps to boost performance and blends smoothly into our approach to produce a segmentation of the scene into static and dynamic parts.Comment: IEEE Winter Conference on Applications of Computer Vision (WACV), 201

Data Processing for Perception of Autonomous Vehicles in Urban Traffic Environments

The perception system of AVs, consisting of various onboard sensors including cameras and LiDAR scanners, is crucial to perceiving the environment, localizing the vehicle, and recognizing the semantics of traffic scenes. Despite recent advances in computer vision, the perception of AVs has remained challenging, especially in urban environments. One of the reasons is that multiple types of dynamic agents usually coexist in an urban area. The interactions between agents and surroundings are complicated to explicitly model, and the agents' unpredictable behaviors also increase the problem complexity. Moreover, ground truth data with a rich set of labels is not sufficient to cover diverse scenarios, and it is challenging to get data from real scenes. This dissertation presents research contributions to overcome the challenges of AV perception in urban traffic environments, from data collection and labeling to 3D reconstruction and analysis of intrinsic properties. Mainly focusing on unsignalized urban intersections, we discuss (1) how to obtain valuable data from real urban traffic scenes, (2) how to efficiently process the raw data to produce meaningful labels for the dynamic road agents, (3) how to augment the data with semantic labels to the scenes, and (4) what factors make the reconstruction more realistic. We first built a data capture system with a multi-modal sensor suite to simulate actual AV perception. We then introduced a 3D model-fitting algorithm to fit parametrized human mesh models to the pedestrians in a scene. The generated 3D models provide free labels, such as human pose and trajectories, with no cost of manual labeling. We proposed performing the entire scene modeling through densely reconstructing the scene and expanding the scope of automatic labeling to scene elements. These include dynamic vehicles and static components, such as roads, buildings, and traffic signs. To do this, we built a simulator that can generate a rich set of labels using virtual sensors. Finally, we tackled the problem of estimating intrinsic properties and discuss ways to achieve realistic 3D reconstruction. This dissertation understands the AV perception pipeline, explores data preparations at urban traffic scenes, and discusses relevant experiments and applications critical for tackling other problems. We conclude the dissertation with future research directions for further augmenting the data and improving the realism of the reconstructed scene models.PHDElectrical Engineering: SystemsUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/169648/1/wonhui_1.pd

Exploiting Structural Regularities and Beyond: Vision-based Localization and Mapping in Man-Made Environments

Image-based estimation of camera motion, known as visual odometry (VO), plays a very important role in many robotic applications such as control and navigation of unmanned mobile robots, especially when no external navigation reference signal is available. The core problem of VO is the estimation of the camera’s ego-motion (i.e. tracking) either between successive frames, namely relative pose estimation, or with respect to a global map, namely absolute pose estimation. This thesis aims to develop efficient, accurate and robust VO solutions by taking advantage of structural regularities in man-made environments, such as piece-wise planar structures, Manhattan World and more generally, contours and edges. Furthermore, to handle challenging scenarios that are beyond the limits of classical sensor based VO solutions, we investigate a recently emerging sensor — the event camera and study on event-based mapping — one of the key problems in the event-based VO/SLAM. The main achievements are summarized as follows. First, we revisit an old topic on relative pose estimation: accurately and robustly estimating the fundamental matrix given a collection of independently estimated homograhies. Three classical methods are reviewed and then we show a simple but nontrivial two-step normalization within the direct linear method that achieves similar performance to the less attractive and more computationally intensive hallucinated points based method. Second, an efficient 3D rotation estimation algorithm for depth cameras in piece-wise planar environments is presented. It shows that by using surface normal vectors as an input, planar modes in the corresponding density distribution function can be discovered and continuously tracked using efficient non-parametric estimation techniques. The relative rotation can be estimated by registering entire bundles of planar modes by using robust L1-norm minimization. Third, an efficient alternative to the iterative closest point algorithm for real-time tracking of modern depth cameras in ManhattanWorlds is developed. We exploit the common orthogonal structure of man-made environments in order to decouple the estimation of the rotation and the three degrees of freedom of the translation. The derived camera orientation is absolute and thus free of long-term drift, which in turn benefits the accuracy of the translation estimation as well. Fourth, we look into a more general structural regularity—edges. A real-time VO system that uses Canny edges is proposed for RGB-D cameras. Two novel alternatives to classical distance transforms are developed with great properties that significantly improve the classical Euclidean distance field based methods in terms of efficiency, accuracy and robustness. Finally, to deal with challenging scenarios that go beyond what standard RGB/RGB-D cameras can handle, we investigate the recently emerging event camera and focus on the problem of 3D reconstruction from data captured by a stereo event-camera rig moving in a static scene, such as in the context of stereo Simultaneous Localization and Mapping

NOVEL DENSE STEREO ALGORITHMS FOR HIGH-QUALITY DEPTH ESTIMATION FROM IMAGES

This dissertation addresses the problem of inferring scene depth information from a collection of calibrated images taken from different viewpoints via stereo matching. Although it has been heavily investigated for decades, depth from stereo remains a long-standing challenge and popular research topic for several reasons. First of all, in order to be of practical use for many real-time applications such as autonomous driving, accurate depth estimation in real-time is of great importance and one of the core challenges in stereo. Second, for applications such as 3D reconstruction and view synthesis, high-quality depth estimation is crucial to achieve photo realistic results. However, due to the matching ambiguities, accurate dense depth estimates are difficult to achieve. Last but not least, most stereo algorithms rely on identification of corresponding points among images and only work effectively when scenes are Lambertian. For non-Lambertian surfaces, the brightness constancy assumption is no longer valid. This dissertation contributes three novel stereo algorithms that are motivated by the specific requirements and limitations imposed by different applications. In addressing high speed depth estimation from images, we present a stereo algorithm that achieves high quality results while maintaining real-time performance. We introduce an adaptive aggregation step in a dynamic-programming framework. Matching costs are aggregated in the vertical direction using a computationally expensive weighting scheme based on color and distance proximity. We utilize the vector processing capability and parallelism in commodity graphics hardware to speed up this process over two orders of magnitude. In addressing high accuracy depth estimation, we present a stereo model that makes use of constraints from points with known depths - the Ground Control Points (GCPs) as referred to in stereo literature. Our formulation explicitly models the influences of GCPs in a Markov Random Field. A novel regularization prior is naturally integrated into a global inference framework in a principled way using the Bayes rule. Our probabilistic framework allows GCPs to be obtained from various modalities and provides a natural way to integrate information from various sensors. In addressing non-Lambertian reflectance, we introduce a new invariant for stereo correspondence which allows completely arbitrary scene reflectance (bidirectional reflectance distribution functions - BRDFs). This invariant can be used to formulate a rank constraint on stereo matching when the scene is observed by several lighting configurations in which only the lighting intensity varies

Keyframe-based monocular SLAM: design, survey, and future directions

Extensive research in the field of monocular SLAM for the past fifteen years has yielded workable systems that found their way into various applications in robotics and augmented reality. Although filter-based monocular SLAM systems were common at some time, the more efficient keyframe-based solutions are becoming the de facto methodology for building a monocular SLAM system. The objective of this paper is threefold: first, the paper serves as a guideline for people seeking to design their own monocular SLAM according to specific environmental constraints. Second, it presents a survey that covers the various keyframe-based monocular SLAM systems in the literature, detailing the components of their implementation, and critically assessing the specific strategies made in each proposed solution. Third, the paper provides insight into the direction of future research in this field, to address the major limitations still facing monocular SLAM; namely, in the issues of illumination changes, initialization, highly dynamic motion, poorly textured scenes, repetitive textures, map maintenance, and failure recovery

Advances in Simultaneous Localization and Mapping in Confined Underwater Environments Using Sonar and Optical Imaging.

This thesis reports on the incorporation of surface information into a probabilistic simultaneous localization and mapping (SLAM) framework used on an autonomous underwater vehicle (AUV) designed for underwater inspection. AUVs operating in cluttered underwater environments, such as ship hulls or dams, are commonly equipped with Doppler-based sensors, which---in addition to navigation---provide a sparse representation of the environment in the form of a three-dimensional (3D) point cloud. The goal of this thesis is to develop perceptual algorithms that take full advantage of these sparse observations for correcting navigational drift and building a model of the environment. In particular, we focus on three objectives. First, we introduce a novel representation of this 3D point cloud as collections of planar features arranged in a factor graph. This factor graph representation probabalistically infers the spatial arrangement of each planar segment and can effectively model smooth surfaces (such as a ship hull). Second, we show how this technique can produce 3D models that serve as input to our pipeline that produces the first-ever 3D photomosaics using a two-dimensional (2D) imaging sonar. Finally, we propose a model-assisted bundle adjustment (BA) framework that allows for robust registration between surfaces observed from a Doppler sensor and visual features detected from optical images. Throughout this thesis, we show methods that produce 3D photomosaics using a combination of triangular meshes (derived from our SLAM framework or given a-priori), optical images, and sonar images. Overall, the contributions of this thesis greatly increase the accuracy, reliability, and utility of in-water ship hull inspection with AUVs despite the challenges they face in underwater environments. We provide results using the Hovering Autonomous Underwater Vehicle (HAUV) for autonomous ship hull inspection, which serves as the primary testbed for the algorithms presented in this thesis. The sensor payload of the HAUV consists primarily of: a Doppler velocity log (DVL) for underwater navigation and ranging, monocular and stereo cameras, and---for some applications---an imaging sonar.PhDElectrical Engineering: SystemsUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/120750/1/paulozog_1.pd

Three-Dimensional Reconstruction and Modeling Using Low-Precision Vision Sensors for Automation and Robotics Applications in Construction

Automation and robotics in construction (ARC) has the potential to assist in the performance of several mundane, repetitive, or dangerous construction tasks autonomously or under the supervision of human workers, and perform effective site and resource monitoring to stimulate productivity growth and facilitate safety management. When using ARC technologies, three-dimensional (3D) reconstruction is a primary requirement for perceiving and modeling the environment to generate 3D workplace models for various applications. Previous work in ARC has predominantly utilized 3D data captured from high-fidelity and expensive laser scanners for data collection and processing while paying little attention of 3D reconstruction and modeling using low-precision vision sensors, particularly for indoor ARC applications. This dissertation explores 3D reconstruction and modeling for ARC applications using low-precision vision sensors for both outdoor and indoor applications. First, to handle occlusion for cluttered environments, a joint point cloud completion and surface relation inference framework using red-green-blue and depth (RGB-D) sensors (e.g., Microsoft® Kinect) is proposed to obtain complete 3D models and the surface relations. Then, to explore the integration of prior domain knowledge, a user-guided dimensional analysis method using RGB-D sensors is designed to interactively obtain dimensional information for indoor building environments. In order to allow deployed ARC systems to be aware of or monitor humans in the environment, a real-time human tracking method using a single RGB-D sensor is designed to track specific individuals under various illumination conditions in work environments. Finally, this research also investigates the utilization of aerially collected video images for modeling ongoing excavations and automated geotechnical hazards detection and monitoring. The efficacy of the researched methods has been evaluated and validated through several experiments. Specifically, the joint point cloud completion and surface relation inference method is demonstrated to be able to recover all surface connectivity relations, double the point cloud size by adding points of which more than 87% are correct, and thus create high-quality complete 3D models of the work environment. The user-guided dimensional analysis method can provide legitimate user guidance for obtaining dimensions of interest. The average relative errors for the example scenes are less than 7% while the absolute errors less than 36mm. The designed human worker tracking method can successfully track a specific individual in real-time with high detection accuracy. The excavation slope stability monitoring framework allows convenient data collection and efficient data processing for real-time job site monitoring. The designed geotechnical hazard detection and mapping methods enable automated identification of landslides using only aerial video images collected using drones.PHDCivil EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/138626/1/yongxiao_1.pd

Efficient Dense Registration, Segmentation, and Modeling Methods for RGB-D Environment Perception

One perspective for artificial intelligence research is to build machines that perform tasks autonomously in our complex everyday environments. This setting poses challenges to the development of perception skills: A robot should be able to perceive its location and objects in its surrounding, while the objects and the robot itself could also be moving. Objects may not only be composed of rigid parts, but could be non-rigidly deformable or appear in a variety of similar shapes. Furthermore, it could be relevant to the task to observe object semantics. For a robot acting fluently and immediately, these perception challenges demand efficient methods. This theses presents novel approaches to robot perception with RGB-D sensors. It develops efficient registration, segmentation, and modeling methods for scene and object perception. We propose multi-resolution surfel maps as a concise representation for RGB-D measurements. We develop probabilistic registration methods that handle rigid scenes, scenes with multiple rigid parts that move differently, and scenes that undergo non-rigid deformations. We use these methods to learn and perceive 3D models of scenes and objects in both static and dynamic environments. For learning models of static scenes, we propose a real-time capable simultaneous localization and mapping approach. It aligns key views in RGB-D video using our rigid registration method and optimizes the pose graph of the key views. The acquired models are then perceived in live images through detection and tracking within a Bayesian filtering framework. An assumption frequently made for environment mapping is that the observed scene remains static during the mapping process. Through rigid multi-body registration, we take advantage of releasing this assumption: Our registration method segments views into parts that move independently between the views and simultaneously estimates their motion. Within simultaneous motion segmentation, localization, and mapping, we separate scenes into objects by their motion. Our approach acquires 3D models of objects and concurrently infers hierarchical part relations between them using probabilistic reasoning. It can be applied for interactive learning of objects and their part decomposition. Endowing robots with manipulation skills for a large variety of objects is a tedious endeavor if the skill is programmed for every instance of an object class. Furthermore, slight deformations of an instance could not be handled by an inflexible program. Deformable registration is useful to perceive such shape variations, e.g., between specific instances of a tool. We develop an efficient deformable registration method and apply it for the transfer of robot manipulation skills between varying object instances. On the object-class level, we segment images using random decision forest classifiers in real-time. The probabilistic labelings of individual images are fused in 3D semantic maps within a Bayesian framework. We combine our object-class segmentation method with simultaneous localization and mapping to achieve online semantic mapping in real-time. The methods developed in this thesis are evaluated in experiments on publicly available benchmark datasets and novel own datasets. We publicly demonstrate several of our perception approaches within integrated robot systems in the mobile manipulation context.Effiziente Dichte Registrierungs-, Segmentierungs- und Modellierungsmethoden für die RGB-D Umgebungswahrnehmung In dieser Arbeit beschäftigen wir uns mit Herausforderungen der visuellen Wahrnehmung für intelligente Roboter in Alltagsumgebungen. Solche Roboter sollen sich selbst in ihrer Umgebung zurechtfinden, und Wissen über den Verbleib von Objekten erwerben können. Die Schwierigkeit dieser Aufgaben erhöht sich in dynamischen Umgebungen, in denen ein Roboter die Bewegung einzelner Teile differenzieren und auch wahrnehmen muss, wie sich diese Teile bewegen. Bewegt sich ein Roboter selbständig in dieser Umgebung, muss er auch seine eigene Bewegung von der Veränderung der Umgebung unterscheiden. Szenen können sich aber nicht nur durch die Bewegung starrer Teile verändern. Auch die Teile selbst können ihre Form in nicht-rigider Weise ändern. Eine weitere Herausforderung stellt die semantische Interpretation von Szenengeometrie und -aussehen dar. Damit intelligente Roboter unmittelbar und flüssig handeln können, sind effiziente Algorithmen für diese Wahrnehmungsprobleme erforderlich. Im ersten Teil dieser Arbeit entwickeln wir effiziente Methoden zur Repräsentation und Registrierung von RGB-D Messungen. Zunächst stellen wir Multi-Resolutions-Oberflächenelement-Karten (engl. multi-resolution surfel maps, MRSMaps) als eine kompakte Repräsentation von RGB-D Messungen vor, die unseren effizienten Registrierungsmethoden zugrunde liegt. Bilder können effizient in dieser Repräsentation aggregiert werde, wobei auch mehrere Bilder aus verschiedenen Blickpunkten integriert werden können, um Modelle von Szenen und Objekte aus vielfältigen Ansichten darzustellen. Für die effiziente, robuste und genaue Registrierung von MRSMaps wird eine Methode vorgestellt, die Rigidheit der betrachteten Szene voraussetzt. Die Registrierung schätzt die Kamerabewegung zwischen den Bildern und gewinnt ihre Effizienz durch die Ausnutzung der kompakten multi-resolutionalen Darstellung der Karten. Die Registrierungsmethode erzielt hohe Bildverarbeitungsraten auf einer CPU. Wir demonstrieren hohe Effizienz, Genauigkeit und Robustheit unserer Methode im Vergleich zum bisherigen Stand der Forschung auf Vergleichsdatensätzen. In einem weiteren Registrierungsansatz lösen wir uns von der Annahme, dass die betrachtete Szene zwischen Bildern statisch ist. Wir erlauben nun, dass sich rigide Teile der Szene bewegen dürfen, und erweitern unser rigides Registrierungsverfahren auf diesen Fall. Unser Ansatz segmentiert das Bild in Bereiche einzelner Teile, die sich unterschiedlich zwischen Bildern bewegen. Wir demonstrieren hohe Segmentierungsgenauigkeit und Genauigkeit in der Bewegungsschätzung unter Echtzeitbedingungen für die Verarbeitung. Schließlich entwickeln wir ein Verfahren für die Wahrnehmung von nicht-rigiden Deformationen zwischen zwei MRSMaps. Auch hier nutzen wir die multi-resolutionale Struktur in den Karten für ein effizientes Registrieren von grob zu fein. Wir schlagen Methoden vor, um aus den geschätzten Deformationen die lokale Bewegung zwischen den Bildern zu berechnen. Wir evaluieren Genauigkeit und Effizienz des Registrierungsverfahrens. Der zweite Teil dieser Arbeit widmet sich der Verwendung unserer Kartenrepräsentation und Registrierungsmethoden für die Wahrnehmung von Szenen und Objekten. Wir verwenden MRSMaps und unsere rigide Registrierungsmethode, um dichte 3D Modelle von Szenen und Objekten zu lernen. Die räumlichen Beziehungen zwischen Schlüsselansichten, die wir durch Registrierung schätzen, werden in einem Simultanen Lokalisierungs- und Kartierungsverfahren (engl. simultaneous localization and mapping, SLAM) gegeneinander abgewogen, um die Blickposen der Schlüsselansichten zu schätzen. Für das Verfolgen der Kamerapose bezüglich der Modelle in Echtzeit, kombinieren wir die Genauigkeit unserer Registrierung mit der Robustheit von Partikelfiltern. Zu Beginn der Posenverfolgung, oder wenn das Objekt aufgrund von Verdeckungen oder extremen Bewegungen nicht weiter verfolgt werden konnte, initialisieren wir das Filter durch Objektdetektion. Anschließend wenden wir unsere erweiterten Registrierungsverfahren für die Wahrnehmung in nicht-rigiden Szenen und für die Übertragung von Objekthandhabungsfähigkeiten von Robotern an. Wir erweitern unseren rigiden Kartierungsansatz auf dynamische Szenen, in denen sich rigide Teile bewegen. Die Bewegungssegmente in Schlüsselansichten werden zueinander in Bezug gesetzt, um Äquivalenz- und Teilebeziehungen von Objekten probabilistisch zu inferieren, denen die Segmente entsprechen. Auch hier liefert unsere Registrierungsmethode die Bewegung der Kamera bezüglich der Objekte, die wir in einem SLAM Verfahren optimieren. Aus diesen Blickposen wiederum können wir die Bewegungssegmente in dichten Objektmodellen vereinen. Objekte einer Klasse teilen oft eine gemeinsame Topologie von funktionalen Elementen, die durch Formkorrespondenzen ermittelt werden kann. Wir verwenden unsere deformierbare Registrierung, um solche Korrespondenzen zu finden und die Handhabung eines Objektes durch einen Roboter auf neue Objektinstanzen derselben Klasse zu übertragen. Schließlich entwickeln wir einen echtzeitfähigen Ansatz, der Kategorien von Objekten in RGB-D Bildern erkennt und segmentiert. Die Segmentierung basiert auf Ensemblen randomisierter Entscheidungsbäume, die Geometrie- und Texturmerkmale zur Klassifikation verwenden. Wir fusionieren Segmentierungen von Einzelbildern einer Szene aus mehreren Ansichten in einer semantischen Objektklassenkarte mit Hilfe unseres SLAM-Verfahrens. Die vorgestellten Methoden werden auf öffentlich verfügbaren Vergleichsdatensätzen und eigenen Datensätzen evaluiert. Einige unserer Ansätze wurden auch in integrierten Robotersystemen für mobile Objekthantierungsaufgaben öffentlich demonstriert. Sie waren ein wichtiger Bestandteil für das Gewinnen der RoboCup-Roboterwettbewerbe in der RoboCup@Home Liga in den Jahren 2011, 2012 und 2013