Protograph-Based LDPC Code Design for Probabilistic Shaping with On-Off Keying

This work investigates protograph-based LDPC codes for the AWGN channel with OOK modulation. A non-uniform distribution of the OOK modulation symbols is considered to improve the power efficiency especially for low SNRs. To this end, a specific transmitter architecture based on time sharing is proposed that allows probabilistic shaping of (some) OOK modulation symbols. Tailored protograph-based LDPC code designs outperform standard schemes with uniform signaling and off-the-shelf codes by 1.1 dB for a transmission rate of 0.25 bits/channel use.Comment: Invited Paper for CISS 201

Simulations of Implementation of Advanced Communication Technologies

Wireless communication systems have seen significant advancements with the introduction of 3G, 4G, and 5G mobile standards. Since the simulation of entire systems is complex and may not allow evaluation of the impact of individual techniques, this thesis presents techniques and results for simulating the performance of advanced signaling techniques used in 3G, 4G, and 5G systems, including Code division multiple access (CDMA), Multiple Input Multiple Output (MIMO) systems, and Low-Density Parity Check (LDPC) codes. One implementation issue that is explored is the use of quantized Analog to Digital Converter (ADC) outputs and their impact on system performance. Code division multiple access (CDMA) is a popular wireless technique, but its effectiveness is limited by factors such as multiple access interference (MAI) and the near far effect (NFE). The joint effect of sampling and quantization on the analog-digital converter (ADC) at the receiver\u27s front end has also been evaluated for different quantization bits. It has been demonstrated that 4 bits is the minimum ADC resolution sensitivity required for a reliable connection for a quantized signal with 3- and 6-dB power levels in noisy and interference-prone environments. The demand for high data rate, reliable transmission, low bit error rate, and maximum transmission with low power has increased in wireless systems. Multiple Input Multiple Output (MIMO) systems with multiple antennas at both the transmitter and receiver side can meet these requirements by exploiting diversity and multipath propagation. The focus of MIMO systems is on improving reliability and maximizing throughput. Performance analysis of single input single output (SISO), single input multiple output (SIMO), multiple input single output (MISO), and MIMO systems is conducted using Alamouti space time block code (STBC) and Maximum Ratio Combining (MRC) technique used for transmit and receive diversity for Rayleigh fading channel under AWGN environment for BPSK and QPSK modulation schemes. Spatial Multiplexing (SM) is used to enhance spectral efficiency without additional bandwidth and power requirements. Minimum mean square error (MMSE) method is used for signal detection at the receiver end due to its low complexity and better performance. The performance of MIMO SM technique is compared for different antenna configurations and modulation schemes, and the MMSE detector is employed at the receiving end. Advanced error correction techniques for channel coding are necessary to meet the demand for Mobile Internet in 5G wireless communications, particularly for the Internet of Things. Low Density Parity Check (LDPC) codes are used for error correction in 5G, offering high coding gain, high throughput, low latency, low power dissipation, low complexity, and rate compatibility. LDPC codes use base matrices of 5G New Radio (NR) for LDPC encoding, and a soft decision decoding algorithm is used for efficient Frame Error Rate (FER) performance. The performance of LDPC codes is assessed using a soft decision decoding layered message passing algorithm, with BPSK modulation and AWGN channel. Furthermore, the effects of quantization on LDPC codes are analyzed for both small and large numbers of quantization bits

Space Shuttle/TDRSS communication and tracking systems analysis

In order to evaluate the technical and operational problem areas and provide a recommendation, the enhancements to the Tracking and Data Delay Satellite System (TDRSS) and Shuttle must be evaluated through simulation and analysis. These enhancement techniques must first be characterized, then modeled mathematically, and finally updated into LinCsim (analytical simulation package). The LinCsim package can then be used as an evaluation tool. Three areas of potential enhancements were identified: shuttle payload accommodations, TDRSS SSA and KSA services, and shuttle tracking system and navigation sensors. Recommendations for each area were discussed

Performance of turbo coded DS-CDMA systems in correlated and uncorrelated satellite communication channels

Word processed copy.Includes bibliographical references (leaves 82-88).This thesis aims at presenting the perfonnance of turbo codes in the correlated and uncorrelated satellite fading channel. Turbo codes are known to give very good perfonnance results in A WGN channels, especially for very large input message length codes or interleaver sizes. It can be shown that good perfonnance of the turbo codes can be achieved with small interleaver sizes in a satellite channel

Survey of Inter-satellite Communication for Small Satellite Systems: Physical Layer to Network Layer View

Small satellite systems enable whole new class of missions for navigation, communications, remote sensing and scientific research for both civilian and military purposes. As individual spacecraft are limited by the size, mass and power constraints, mass-produced small satellites in large constellations or clusters could be useful in many science missions such as gravity mapping, tracking of forest fires, finding water resources, etc. Constellation of satellites provide improved spatial and temporal resolution of the target. Small satellite constellations contribute innovative applications by replacing a single asset with several very capable spacecraft which opens the door to new applications. With increasing levels of autonomy, there will be a need for remote communication networks to enable communication between spacecraft. These space based networks will need to configure and maintain dynamic routes, manage intermediate nodes, and reconfigure themselves to achieve mission objectives. Hence, inter-satellite communication is a key aspect when satellites fly in formation. In this paper, we present the various researches being conducted in the small satellite community for implementing inter-satellite communications based on the Open System Interconnection (OSI) model. This paper also reviews the various design parameters applicable to the first three layers of the OSI model, i.e., physical, data link and network layer. Based on the survey, we also present a comprehensive list of design parameters useful for achieving inter-satellite communications for multiple small satellite missions. Specific topics include proposed solutions for some of the challenges faced by small satellite systems, enabling operations using a network of small satellites, and some examples of small satellite missions involving formation flying aspects.Comment: 51 pages, 21 Figures, 11 Tables, accepted in IEEE Communications Surveys and Tutorial

Channel Coding in Molecular Communication

This dissertation establishes and analyzes a complete molecular transmission system from a communication engineering perspective. Its focus is on diffusion-based molecular communication in an unbounded three-dimensional fluid medium. As a basis for the investigation of transmission algorithms, an equivalent discrete-time channel model (EDTCM) is developed and the characterization of the channel is described by an analytical derivation, a random walk based simulation, a trained artificial neural network (ANN), and a proof of concept testbed setup. The investigated transmission algorithms cover modulation schemes at the transmitter side, as well as channel equalizers and detectors at the receiver side. In addition to the evaluation of state-of-the-art techniques and the introduction of orthogonal frequency-division multiplexing (OFDM), the novel variable concentration shift keying (VCSK) modulation adapted to the diffusion-based transmission channel, the lowcomplex adaptive threshold detector (ATD) working without explicit channel knowledge, the low-complex soft-output piecewise linear detector (PLD), and the optimal a posteriori probability (APP) detector are of particular importance and treated. To improve the error-prone information transmission, block codes, convolutional codes, line codes, spreading codes and spatial codes are investigated. The analysis is carried out under various approaches of normalization and gains or losses compared to the uncoded transmission are highlighted. In addition to state-of-the-art forward error correction (FEC) codes, novel line codes adapted to the error statistics of the diffusion-based channel are proposed. Moreover, the turbo principle is introduced into the field of molecular communication, where extrinsic information is exchanged iteratively between detector and decoder. By means of an extrinsic information transfer (EXIT) chart analysis, the potential of the iterative processing is shown and the communication channel capacity is computed, which represents the theoretical performance limit for the system under investigation. In addition, the construction of an irregular convolutional code (IRCC) using the EXIT chart is presented and its performance capability is demonstrated. For the evaluation of all considered transmission algorithms the bit error rate (BER) performance is chosen. The BER is determined by means of Monte Carlo simulations and for some algorithms by theoretical derivation

Multilevel Orthogonal Coded Modulation

Multilevel orthogonal coded modulation technique is a combination of orthogonal channel coding and M-ary modulation, where two or more codes are used simultaneously to detect and correct multiple errors with bandwidth efficiency. The concept, principles, and simulations of the multilevel orthogonal coding combined with M-ary modulations is presented in this thesis. In multilevel orthogonal coding, both information and orthogonal code blocks are split into multiple levels. The information data in each level are mapped to the corresponding orthogonal codes. The outputs of the encoders are then grouped to form symbols suitable for input to spectrally efficient multilevel modulations. The modulated symbols are then transmitted to the channel. At the receiver, the decoding is performed using the correlative decoder. The correlative decoding is also performed in multiple levels independently. At each level of decoding, the incoming orthogonal codes with errors are cross-correlated with the known set of orthogonal code blocks. Then the code set that gives the smallest correlation value, at each level, is chosen as the desired orthogonal code output. The implementing of multilevel encoding and decoding structure increases the error correcting capability of the system significantly, allowing multiple numbers of error corrections. Also, error correction capability of orthogonal codes improves with increasing the code lengths. Combining longer codes in multilevel structures the system shows better error performance. Additionally, the multilevel encoding outputs are suitable for performing multilevel modulation (M-ary modulation), which allows the transmissions of a large number of bits per symbol. This makes the systems to have minimum transmission bandwidths that increase the throughput. The encoding and decoding structures for three code rates: rate ݬ rate ެ and rate 1, for different orthogonal code lengths are presented and simulated. The transmission bandwidths, bandwidth efficiencies are calculated and error performance analyses of systems are conducted. M-ary Phase Shift Keying (PSK) and M-ary Quadrature Amplitude Modulation (QAM) modulation techniques are chosen as modulation techniques to simulate and analyze the performances in MATLAB. To show the application of MOCM, multilevel orthogonal coded M-ary PSK modulation transmitted in optical wireless communication systems using ambient light cancellation technology is also presented. To simulate the error performances, additive white Gaussian noise channel is used at various signal-to-noise ratios (SNR). The number of errors before decoding and after decoding is counted and tabulated. The number of bit error corrected at specified signal to noise ratio is also tabulated. Error performance curves are plotted and coding gains are observed. The results show the performance improvement of the systems compared to uncoded systems. Also, the coded systems are bandwidth efficient. Thus, the multilevel orthogonal coded modulation systems provide higher error correction capability with bandwidth efficiency