Identifying Design Requirements for Wireless Routing Link Metrics

In this paper, we identify and analyze the requirements to design a new routing link metric for wireless multihop networks. Considering these requirements, when a link metric is proposed, then both the design and implementation of the link metric with a routing protocol become easy. Secondly, the underlying network issues can easily be tackled. Thirdly, an appreciable performance of the network is guaranteed. Along with the existing implementation of three link metrics Expected Transmission Count (ETX), Minimum Delay (MD), and Minimum Loss (ML), we implement inverse ETX; invETX with Optimized Link State Routing (OLSR) using NS-2.34. The simulation results show that how the computational burden of a metric degrades the performance of the respective protocol and how a metric has to trade-off between different performance parameters

On using Multiple Quality Link Metrics with Destination Sequenced Distance Vector Protocol for Wireless Multi-Hop Networks

In this paper, we compare and analyze performance of five quality link metrics forWireless Multi-hop Networks (WMhNs). The metrics are based on loss probability measurements; ETX, ETT, InvETX, ML and MD, in a distance vector routing protocol; DSDV. Among these selected metrics, we have implemented ML, MD, InvETX and ETT in DSDV which are previously implemented with different protocols; ML, MD, InvETX are implemented with OLSR, while ETT is implemented in MR-LQSR. For our comparison, we have selected Throughput, Normalized Routing Load (NRL) and End-to-End Delay (E2ED) as performance parameters. Finally, we deduce that InvETX due to low computational burden and link asymmetry measurement outperforms among all metrics

Experimental Performance Analysis of Routing Metrics in Wireless Mesh Networks

International audienceThis paper provides a description of a wireless mesh network testbed setup and a measurement-based performance evaluation of the Optimized Link State Routing (OLSR) protocol [7] under three different routing metrics. The considered metrics include hop-count, ETX and ETT. The network performances are evaluated in an indoor testbed formed by heterogeneous MIMO devices. A part of our tests was about the impact of 802.11n features on the network performances showing the importance of lower layers consideration. Our measurements point out the shortcoming of each metric and eventual optimizations towards a more efficient routing. Experimental results show that OLSRETT outperforms OLSR-ETX and OLSR-hopcount significantly in terms of packet loss, end-to-end delay, and efficiency

Improving the reliability of optimised link state routing in a smart grid neighbour area network based wireless mesh network using multiple metrics

© 2017 by the authors; licensee MDPI. Reliable communication is the backbone of advanced metering infrastructure (AMI). Within the AMI, the neighbourhood area network (NAN) transports a multitude of traffic, each with unique requirements. In order to deliver an acceptable level of reliability and latency, the underlying network, such as the wireless mesh network (WMN), must provide or guarantee the quality-of-service (QoS) level required by the respective application traffic. Existing WMN routing protocols, such as optimised link state routing (OLSR), typically utilise a single metric and do not consider the requirements of individual traffic; hence, packets are delivered on a best-effort basis. This paper presents a QoS-aware WMN routing technique that employs multiple metrics in OLSR optimal path selection for AMI applications. The problems arising from this approach are non deterministic polynomial time (NP)-complete in nature, which were solved through the combined use of the analytical hierarchy process (AHP) algorithm and pruning techniques. For smart meters transmitting Internet Protocol (IP) packets of varying sizes at different intervals, the proposed technique considers the constraints of NAN and the applications' traffic characteristics. The technique was developed by combining multiple OLSR path selection metrics with the AHP algorithm in ns-2. Compared with the conventional link metric in OLSR, the results show improvements of about 23% and 45% in latency and Packet Delivery Ratio (PDR), respectively, in a 25-node grid NAN

Towards an Optimized Traffic-Aware Routing in Wireless Mesh Networks

International audienceIn this paper we study through simulations the impact of PHY/MAC protocols on higher layers. In a comparative way, we investigate the effectiveness of some protocols when they coexist on a wireless mesh network environment. Results show that PHY/MAC parameters have an important impact on routing performances. Based on these results, we propose two tra c-aware routing metrics based on link availability. The information about the link availability/occupancy is picked up from lower layers using a cross-layer approach. The rst metric is load-sensitive and aims to balance the tra c load according to the availability of a link to support additional ows. The second metric reproduces better the capacity of a link since it is based on its residual bandwidth. Using several real experiments, we have shown that our proposals can accurately determine better paths in terms of throughput and delay. Our experiments are carried out into an heterogeneous IEEE 802.11n based network running with OLSR routing protocol

Multiple metrics-OLSR in NAN for Advanced Metering Infrastructures

Routing in Neighbourhood Area Network (NAN) for Smart Grid's Advanced Metering Infrastructure (AMI) raises the need for Quality of Service (QoS)-Aware routing. This is due to the expanded list of applications that will result in the transmission of different types of traffic between NAN devices (i.e smart meters). In wireless mesh network (WMN) routing, a combination of multiple link metrics, though complex, has been identified as a possible solution for QoS routing. These complexities (i.e Np complete problem) can be resolved through the use of Analytical Hierarchy Process (AHP) algorithm and pruning techniques. With the assumption that smart meters transmit IP packets of different sizes at different interval to represent AMI traffic, a case study of the performance of three Optimised Link State Routing (OLSR) link metrics is carried out on a grid topology NAN based WMN in ns-2 network simulator. The best two performing metric were used to show the possibility of combining multiple metrics with OLSR through the AHP algorithm to fulfill the QoS routing requirements of targeted AMI application traffic in NANs

Link Availability Aware Routing Metric For Wireless Mesh Networks

International audienceThis paper investigates the design of effective routing metrics in the purpose of network resources optimization and the satisfaction of users QoS requirements. Using several real experiments, we point out the shortcoming of the Expected Transmission Count (ETX) metric for eventual optimizations towards a more efficient routing. Experiments were carried out into an heterogeneous IEEE 802.11n based network running with OLSR routing protocol and have shown that ETX presents several shortcoming resulting in inaccurate estimation of the link quality and then of the routing decision. This paper presents improvements of the ETX metric based on link availibility for accurately finding high-throughput paths in multihop wireless mesh networks

A testbed for MANETs: Implementation, experiences and learned lessons

In this paper, we present the implementation, experiences and lessons learned of our tesbed for Ad-hoc networks and Mobile Ad hoc Networks (MANETs). We used OLSR protocol for real experimental evaluation. We investigate the effect of mobility and topology changing in the throughput of a MANET. We study the impact of best-effort traffic for Mesh Topology and Linear Topology. In this work, we consider eight experimental models and we assess the performance of our testbed in terms of throughput, round trip time and packet loss. We found that some of the OLSR's problems can be solved, for instance the routing loop, but this protocol still has the self-interference problem. Also, there is an intricate interdependence between MAC layer and routing layer. We carried out the experiments considering stationary nodes of an Ad-hoc network and the node mobility of MANETs. We found that throughput of TCP was improved by reducing Link Quality Window Size (LQWS). For TCP data flow, we got better results when the LQWS value was 10. Moreover, we found that the node join and leave operations increase the packet loss. The OLSR protocol has a good performance when the source node is moving. However, the performance is not good when the relay nodes are moving.Peer ReviewedPostprint (published version

Performance analysis of variable Smart Grid traffic over ad hoc Wireless Mesh Networks

Recent advances in ad hoc Wireless Mesh Networks (WMN) has posited it as a strong candidate in Smart Grid's Neighbourhood Area Network (NAN) for Advanced Metering Infrastructure (AMI). However, its abysmal capacity and poor multi-hoping performance in harsh dynamic environment will require an improvement to its protocol stacks in order for it to effectively support the variable requirements of application traffic in Smart Grid. This paper presents a classification of Smart Grid traffics and examines the performance of HWMP (which is the default routing protocol of the IEEE 802.11s standard) with the Optimised Link State Routing (OLSR) protocol in a NAN based ad hoc WMN. Results from simulations in ns-3 show that HWMP does not outperform OLSR. This indicates that cross layer modifications can be developed in OLSR protocol to address the routing challenges in a NAN based ad hoc WMN