Embedded coding algorithms applicable to time variable channels

This thesis investigates new design and implementation techniques applicable to modern communication systems operating over time variable channels. Three areas of interest are investigated. These include, source coding in conjunction with real-time channel evaluation, channel coding and modem design. An investigation of source coding methods has led to the development of a new embedded real time channel evaluation, based on statistical techniques. The performance of this technique is examined using simulation techniques for channels with and without memory. Existing channel coding schemes applicable to time variable channels have been examined. This led to the formulation of a new coding technique, termed embedded encoding. Two implementations of such codes, embedded array codes and embedded convolutional codes, were developed. The theoretical and practical performance of these codes has been investigated. The final area of investigation has been the development of a 4-tone multi-frequency shift keying modem. In keeping with the intention of totally digital system design, the demodulator has been im­plemented on a single digital signal processing card. The demodulation method developed employs an embedded synchronisation technique, termed Code-Assisted Bit Synchronisation. The demodulator performs symbol synchronisation by utilising the convolutional code used for the purpose of channel coding. It thus performs the combined functions of the demodulator, decoder and symbol timing recovery, which are normally found as separate sub­systems. In combining these subsystems a more efficient modem has been developed

Resource allocation issues in broadband wireless networks with OFDM signaling

Wireless broadband technologies are anticipated to flourish in thenext few years, due to the increasing demand for wireless connectivityand the need to support enhanced services and applications in local-or wide-area environments. The primary goal in a communications systemis Quality of service (QoS) provisioning to users, which depends onprocedures that span several communication layers. Although independentconsideration of different layers simplifies system design, it oftenturns out to be insufficient for wireless networks. Cochannelinterference between users that reuse the limited spectrum and theresulting impact of local adaptation actions on overall network performance impose layer interactions in wireless systems. The purposeof this work is to identify and study some of the issues that arisefrom the synergy between the physical and the MAC layer in the contextof multiple access schemes with orthogonal channels. Using the essential feature of channel orthogonality as a baseline,our approach places emphasis on Orthogonal Frequency Division Multiplexing(OFDM), which is an emerging multiple access and signaling method for futurewireless broadband networks. In OFDM, the broadband spectrum isdivided into orthogonal, narrow-band subcarriers and user symbols aresplit into subsymbols, which are transmitted in parallel over thosevariable-quality subcarriers. OFDM transmission reduces the effectivesymbol transmission rate, simplifies equalization at the receiver andprovides high immunity to inter-symbol interference and delay spread.Furthermore, it defines a framework for flexible adaptation to varyingchannel conditions, by allowing transmission parameter control foreach subcarrier. We first address the joint problem of channel allocation withsimultaneous adaptation of modulation level and transmission power ina multi-cell OFDM network. We study the impact of those parameters oncochannel interference and channel reuse and present two classes ofcentralized heuristic algorithms to perform the allocation. Next, we focus on a single-cell multi-user system with modulationcontrol and study the problem of subcarrier assignment to userssubject to time resource constraints. We study and compare integral andfractional user assignment, whereby a user is assigned to one subcarrieror can be partially assigned to multiple subcarriers. In addition, weconsider the synergy between link-layer ARQ protocols and physicallayer parameter adaptation. We consider a simple channel monitoringmethod which is based on counting received ACKs and NACKs. For asingle subcarrier, we show that the adaptation policy which maximizeslong-term average throughput per unit time is of threshold type. Wealso expand our policy to the multiple-subcarrier case with similar ordifferent channel qualities.In the sequel, we study the impact of smart antennas and SpaceDivision Multiple Access (SDMA) on MAC layer channel allocation for a single-cell multi-user system. Our approach encompasses multipleaccess schemes with orthogonal channels, such as OFDM. We first considerthe case of unlimited transceiver resources, where a separate beam canbe formed for each user of a spatially separable cochannel user set ina subcarrier. We present heuristic algorithms to allocate subcarriersto users and adjust down-link beam patterns, transmission powers andrates with the objective to increase total achievable system rate andprovide QoS to users in the form of minimum rate guarantees. Then, we consider the allocation problem forlimited transceiver resources, which arises whenever certainreasons impose limitations on the number of beams that can beformed. We propose meaningful heuristic algorithms to jointly formbeams from corresponding transceivers and assign subcarriers andtransceivers to users, such that the total achievable system rate isincreased

Variable Redundancy Coding for Adaptive Error Control

This thesis is concerned with variable redundancy(VR) error control coding. VR coding is proposed as one method of providing efficient adaptive error control for time-varying digital data transmission links. The VR technique involves using a set of short, easy to implement, block codes; rather than the one code of a fixed redundancy system which is usually inefficient, and complex to decode. With a VR system, efficient data-rate low-power codes are used when channel conditions are good, and very high-power inefficient codes are used when the channel is noisy. The decoder decides which code is required to cope with current conditions, and communicates this decision to the encoder by means of a feedback link. This thesis presents a theoretical and practical investigation of the VR technique, and aims to show that when compared with a fixed redundancy system one or more of the advantages of increased average data throughput, decreased maximum probability of erroneous decoding, and decreased complexity can be realised. This is confirmed by the practical results presented in the thesis, which were obtained from field trials of an experimental VR system operating over the HE’ radio channel, and from computer simulations. One consequence of the research has been the inception of a study of codes with disjoint code books and mutual Hamming distance (initially considered for combatting feedback errors), and this topic is introduced in the thesis

A practical investigation of meteor-burst communications.

Thesis (Ph.D.)-University of Natal, Durban, 1991.This study considers the meteor-burst communication (MBC) environment at three levels. At the lowest level, the trails themselves are studied and analysed. Then individual links are studied in order to determine the data throughput and wait time that might be expected at various data rates. Finally, at the top level, MBC networks are studied in order to provide information on the effects of routing strategies, topologies, and connectivity in such networks. A significant amount of theoretical work has been done in the classification of meteor trails, and the analysis of the throughput potential of the channel. At the same time the issues of wait time on MBC links, and MBC network strategies, have been largely ignored. The work presented here is based on data captured on actual monitoring links, and is intended to provide both an observational comparison to theoretical predictions in the well-researched areas, and a source of base information for the others. Chapter 1 of this thesis gives an overview of the field of meteor-burst communications. Prior work in the field is discussed, as are the advantages and disadvantages of the channel, and current application areas. Chapter 2 describes work done on the classification of observed meteor trails into distinctive 'families'. The rule-based system designed for this task is discussed as well as the eventual classification schema produced, which is far more comprehensive and consistent than previously proposed schemas. Chapter 3 deals with the throughput potential of the channel, based on the observed trails. A comparison to predicted results, both as regards fixed and adaptive data-rates, is made with some notable differences between predicted v results and observed results highlighted. The trail families with the largest contribution to the throughput capacity of the channel are identified. Chapter 4 deals with wait time in meteor-burst communications. The data rates at which wait time is minimised in the links used are found, and compared to the rates at which throughput was optimised. These are found to be very different, as indeed are the contributions of the various trail families at these rates. Chapter 5 describes a software system designed to analyse the effect of routing strategies in MBC networks, and presents initial results derived from this system. Certain features of the channel, in particular its sporadic nature, are shown to have significant effects on network performance. Chapter 6 continues the presentation of network results, specifically concentrating on the effect of topologies and connectivity within MBC networks. Chapter 7 concludes the thesis, highlighting suggested areas for further research as well as summarising the more important results presented

Variable Rate Transmission Over Noisy Channels

Hybrid automatic repeat request transmission (hybrid ARQ) schemes aim to provide system reliability for transmissions over noisy channels while still maintaining a reasonably high throughput efficiency by combining retransmissions of automatic repeat requests with forward error correction (FEC) coding methods. In type-II hybrid ARQ schemes, the additional parity information required by channel codes to achieve forward error correction is provided only when errors have been detected. Hence, the available bits are partitioned into segments, some of which are sent to the receiver immediately, others are held back and only transmitted upon the detection of errors. This scheme raises two questions. Firstly, how should the available bits be ordered for optimal partitioning into consecutive segments? Secondly, how large should the individual segments be? This thesis aims to provide an answer to both of these questions for the transmission of convolutional and Turbo Codes over additive white Gaussian noise (AWGN), inter-symbol interference (ISI) and Rayleigh channels. Firstly, the ordering of bits is investigated by simulating the transmission of packets split into segments with a size of 1 bit and finding the critical number of bits, i.e. the number of bits where the output of the decoder is error-free. This approach provides a maximum, practical performance limit over a range of signal-to-noise levels. With these practical performance limits, the attention is turned to the size of the individual segments, since packets of 1 bit cause an intolerable overhead and delay. An adaptive, hybrid ARQ system is investigated, in which the transmitter uses the number of bits sent to the receiver and the receiver decoding results to adjust the size of the first, initial, packet and subsequent segments to the conditions of a stationary channel

Advanced Trends in Wireless Communications

Physical limitations on wireless communication channels impose huge challenges to reliable communication. Bandwidth limitations, propagation loss, noise and interference make the wireless channel a narrow pipe that does not readily accommodate rapid flow of data. Thus, researches aim to design systems that are suitable to operate in such channels, in order to have high performance quality of service. Also, the mobility of the communication systems requires further investigations to reduce the complexity and the power consumption of the receiver. This book aims to provide highlights of the current research in the field of wireless communications. The subjects discussed are very valuable to communication researchers rather than researchers in the wireless related areas. The book chapters cover a wide range of wireless communication topics

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion

Large space structures and systems in the space station era: A bibliography with indexes

Bibliographies and abstracts are listed for 1372 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1, 1990 and June 30, 1990. Its purpose is to provide helpful information to the researcher, manager, and designer in technology development and mission design according to system, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion, and solar power satellite systems

Reliability Abstracts and Technical Reviews 1962-1963

No abstract availabl