Joint transceiver design and power optimization for wireless sensor networks in underground mines

Avec les grands développements des technologies de communication sans fil, les réseaux de capteurs sans fil (WSN) ont attiré beaucoup d’attention dans le monde entier au cours de la dernière décennie. Les réseaux de capteurs sans fil sont maintenant utilisés pour a surveillance sanitaire, la gestion des catastrophes, la défense, les télécommunications, etc. De tels réseaux sont utilisés dans de nombreuses applications industrielles et commerciales comme la surveillance des processus industriels et de l’environnement, etc. Un réseau WSN est une collection de transducteurs spécialisés connus sous le nom de noeuds de capteurs avec une liaison de communication distribuée de manière aléatoire dans tous les emplacements pour surveiller les paramètres. Chaque noeud de capteur est équipé d’un transducteur, d’un processeur de signal, d’une unité d’alimentation et d’un émetteur-récepteur. Les WSN sont maintenant largement utilisés dans l’industrie minière souterraine pour surveiller certains paramètres environnementaux, comme la quantité de gaz, d’eau, la température, l’humidité, le niveau d’oxygène, de poussière, etc. Dans le cas de la surveillance de l’environnement, un WSN peut être remplacé de manière équivalente par un réseau à relais à entrées et sorties multiples (MIMO). Les réseaux de relais multisauts ont attiré un intérêt de recherche important ces derniers temps grâce à leur capacité à augmenter la portée de la couverture. La liaison de communication réseau d’une source vers une destination est mise en oeuvre en utilisant un schéma d’amplification/transmission (AF) ou de décodage/transfert (DF). Le relais AF reçoit des informations du relais précédent et amplifie simplement le signal reçu, puis il le transmet au relais suivant. D’autre part, le relais DF décode d’abord le signal reçu, puis il le transmet au relais suivant au deuxième étage s’il peut parfaitement décoder le signal entrant. En raison de la simplicité analytique, dans cette thèse, nous considérons le schéma de relais AF et les résultats de ce travail peuvent également être développés pour le relais DF. La conception d’un émetteur/récepteur pour le relais MIMO multisauts est très difficile. Car à l’étape de relais L, il y a 2L canaux possibles. Donc, pour un réseau à grande échelle, il n’est pas économique d’envoyer un signal par tous les liens possibles. Au lieu de cela, nous pouvons trouver le meilleur chemin de la source à la destination qui donne le rapport signal sur bruit (SNR) de bout en bout le plus élevé. Nous pouvons minimiser la fonction objectif d’erreur quadratique moyenne (MSE) ou de taux d’erreur binaire (BER) en envoyant le signal utilisant le chemin sélectionné. L’ensemble de relais dans le chemin reste actif et le reste des relais s’éteint, ce qui permet d’économiser de l’énergie afin d’améliorer la durée de vie du réseau. Le meilleur chemin de transmission de signal a été étudié dans la littérature pour un relais MIMO à deux bonds mais est plus complexe pour un ...With the great developments in wireless communication technologies, Wireless Sensor Networks (WSNs) have gained attention worldwide in the past decade and are now being used in health monitoring, disaster management, defense, telecommunications, etc. Such networks are used in many industrial and consumer applications such as industrial process and environment monitoring, among others. A WSN network is a collection of specialized transducers known as sensor nodes with a communication link distributed randomly in any locations to monitor environmental parameters such as water level, and temperature. Each sensor node is equipped with a transducer, a signal processor, a power unit, and a transceiver. WSNs are now being widely used in the underground mining industry to monitor environmental parameters, including the amount of gas, water, temperature, humidity, oxygen level, dust, etc. The WSN for environment monitoring can be equivalently replaced by a multiple-input multiple-output (MIMO) relay network. Multi-hop relay networks have attracted significant research interest in recent years for their capability in increasing the coverage range. The network communication link from a source to a destination is implemented using the amplify-and-forward (AF) or decode-and-forward (DF) schemes. The AF relay receives information from the previous relay and simply amplifies the received signal and then forwards it to the next relay. On the other hand, the DF relay first decodes the received signal and then forwards it to the next relay in the second stage if it can perfectly decode the incoming signal. For analytical simplicity, in this thesis, we consider the AF relaying scheme and the results of this work can also be developed for the DF relay. The transceiver design for multi-hop MIMO relay is very challenging. This is because at the L-th relay stage, there are 2L possible channels. So, for a large scale network, it is not economical to send the signal through all possible links. Instead, we can find the best path from source-to-destination that gives the highest end-to-end signal-to-noise ratio (SNR). We can minimize the mean square error (MSE) or bit error rate (BER) objective function by sending the signal using the selected path. The set of relay in the path remains active and the rest of the relays are turned off which can save power to enhance network life-time. The best path signal transmission has been carried out in the literature for 2-hop MIMO relay and for multiple relaying it becomes very complex. In the first part of this thesis, we propose an optimal best path finding algorithm at perfect channel state information (CSI). We consider a parallel multi-hop multiple-input multiple-output (MIMO) AF relay system where a linear minimum mean-squared error (MMSE) receiver is used at the destination. We simplify the parallel network into equivalent series multi-hop MIMO relay link using best relaying, where the best relay ..

Adaptive relaying protocol multiple-input multiple-output orthogonal frequency division multiplexing systems

In wireless broadband communications, orthogonal frequency division multiplexing (OFDM) has been adopted as a promising technique to mitigate multi-path fading and provide high spectral efficiency. In addition, cooperative communication can explore spatial diversity where several users or nodes share their resources and cooperate through distributed transmission. The concatenation of the OFDM technique with relaying systems can enhance the overall performance in terms of spectral efficiency and improve robustness against the detrimental effects of fading. Hybrid relay selection is proposed to overcome the drawbacks of conventional forwarding schemes. However, exciting hybrid relay protocols may suffer some limitations when used for transmission over frequency-selective channels. The combination of cooperative protocols with OFDM systems has been extensively utilized in current wireless networks, and have become a promising solution for future high data rate broadband communication systems including 3D video transmission. This thesis covers two areas of high data rate networks. In the first part, several techniques using cooperative OFDM systems are presented including relay selection, space time block codes, resource allocation and adaptive bit and power allocation to introduce diversity. Four (4) selective OFDM relaying schemes are studied over wireless networks; selective OFDM; selective OFDMA; selective block OFDM and selective unequal block OFDM. The closed-form expression of these schemes is derived. By exploiting the broadcast nature, it is demonstrated that spatial diversity can be improved. The upper bound of outage probability for the protocols is derived. A new strategy for hybrid relay selection is proposed to improve the system performance by removing the sub-carriers that experience deep fading. The per subcarrier basis selection is considered with respect to the predefined threshold signal-to-noise ratio. The closed-form expressions of the proposed protocol in terms of bit error probability and outage probability are derived and compared with conventional hybrid relay selection. Adaptive bit and power allocation is also discussed to improve the system performance. Distributed space frequency coding applied to hybrid relay selection to obtain full spatial and full data rate transmission is explored. Two strategies, single cluster and multiple clusters, are considered for the Alamouti code at the destination by using a hybrid relay protocol. The power allocation with and without sub-carrier pairing is also investigated to mitigate the effect of multipath error propagation in frequency-selective channels. The second part of this thesis investigates the application of cooperative OFDM systems to high data rate transmission. Recently, there has been growing attention paid to 3D video transmission over broadband wireless channels. Two strategies for relay selection hybrid relay selection and first best second best are proposed to implement unequal error protection in the physical layer over error prone channels. The closed-form expressions of bit error probability and outage probability for both strategies are examined. The peak signal-to-noise ratio is presented to show the quality of reconstruction of the left and right views

Robust transceiver designs for MIMO relay communication systems

The thesis investigates robust linear and non-linear transceiver design problems for wireless MIMO relay communication systems with the assumption that the partial information of the channel is available at the relay node. The joint source and relay optimization problems for MIMO relay systems are highly nonconvex, in general. We transform the problems into suitable forms which can be efficiently solved using standard convex optimization techniques. The proposed design schemes outperform the existing techniques

QoS-Constrained Sum-Harvested Energy Maximization in OFDMA-based Wireless Cooperative Networks

We investigate the performances of the time-switching (TS) and power-splitting (PS) based energy harvesting models in a two-hop relay assisted network where the end-users are capable of decoding information and harvesting energy concurrently. In particular, we consider joint resource allocation and relay selection to realize Simultaneous Wireless Transmission of Information and Energy (Wi-TIE) in a multi-carrier multi-user cooperative system where the relays employ the amplify-and-forward (AF) protocol. First, we formulate based on the TS and PS Wi-TIE architectures an optimization problem to maximize the sum of energy harvested at the end-users, taking into consideration each user's quality-of-service (QoS) requirement as well as power constraints at the transmit and relaying nodes. We then solve the formulated problem to optimize the users' Wi-TIE splitting factors along with relay-user coupling, sub-carrier-user assignment, sub-carrier pairing, and power allocation. Finally, we demonstrate the benefits of the proposed framework via numerical results

Adaptive relay techniques for OFDM-based cooperative communication systems

Cooperative communication has been considered as a cost-effective manner to exploit the spatial diversity, improve the quality-of-service and extend transmission coverage. However, there are many challenges faced by cooperative systems which use relays to forward signals to the destination, such as the accumulation of multipath channels, complex resource allocation with the bidirectional asymmetric traffic and reduction of transmission efficiency caused by additional relay overhead. In this thesis, we aim to address the above challenges of cooperative communications, and design the efficient relay systems. Starting with the channel accumulation problem in the amplify-and-forward relay system, we proposed two adaptive schemes for single/multiple-relay networks respectively. These schemes exploit an adaptive guard interval (GI) technique to cover the accumulated delay spread and enhance the transmission efficiency by limiting the overhead. The proposed GI scheme can be implemented without any extra control signal. Extending the adaptive GI scheme to multiple-relay systems, we propose a relay selection strategy which achieves the trade-off between the transmission reliability and overhead by considering both the channel gain and the accumulated delay spread. We then consider resource allocation problem in the two-way decode-and-forward relay system with asymmetric traffic loads. Two allocation algorithms are respectively investigated for time-division and frequency-division relay systems to maximize the end-to-end capacity of the two-way system under a capacity ratio constraint. For the frequency-division systems, a balanced end-to-end capacity is defined as the objective function which combines the requirements of maximizing the end-to-end capacity and achieving the capacity ratio. A suboptimal algorithm is proposed for the frequency-division systems which separates subcarrier allocation and time/power allocation. It can achieve the similar performance with the optimal one with reduced complexity. In order to further enhance the transmission reliability and maintaining low processing delay, we propose an equalize-and-forward (EF) relay scheme. The EF relay equalizes the channel between source and relay to eliminate the channel accumulation without signal regeneration. To reduce the processing time, an efficient parallel structure is applied in the EF relay. Numerical results show that the EF relay exhibits low outage probability at the same data rate as compared to AF and DF schemes

Multichannel power line communication

Power line communication (PLC) is the technology in which the data signals of a communication system are transmitted through the conductors of a power delivery infrastructure. The unique environment of the PLC channels create specific challenges and requirements, which need to be modeled and analyzed properly in order to obtain a clear understanding of the communication system as well as attaining the ability to further improve the performance and reliability of the transmission. Moreover, the demand for increased data throughput as well as increased reliability and robustness of the transmission is of fundamental importance in any communication system as it is in PLC systems. In order to address these challenges and demands, the concept of multichannel PLC is studied and developed in this thesis. Multichannel PLC in this context is referred to the transmission of multiple information-carrying signals though the power line channel from one source to one destination. We study multiple scenarios of multichannel data transmission in order to cover the diverse situations and requirements of a PLC transmission. One of the multichannel scenarios discussed in this thesis is the multiple-input multiple-output (MIMO) transmission, in which multiple data signals are transmitted via spatially separated PLC channels. Another scenario discussed in this thesis is the cooperative transmission between the source and destination of a PLC system by means of intermediate relay nodes in the network. Finally, the multiband transmission by utilizing different parts of the available PLC spectrum is studied. The core objective of this thesis is to develop and study novel algorithms and models to address the challenges and problems introduced in different scenarios of the multichannel PLC. These problems can be categorized as the channel selection problem for MIMO transmission, the relay selection problem for the cooperative communication, and the spectrum assignment problem for the multiband transmission. The basis of all these problems is a decision making problem, which can greatly influence the performance of the system. To address these decision making problems, a powerful mathematical tool, namely the multi-armed bandit model, is used to model the different problems emerging in different scenarios of the multichannel PLC. This modeling approach is then used as a building block for developing machine learning algorithms in order to solve the aforementioned selection problems. Finally, novel machine learning algorithms are developed and their performances are analyzed and assessed. It is shown that the machine learning approach can considerably improve the performance of the multichannel PLC systems compared to the existing state of the art approaches, by enabling the selecting agent, i.e. the PLC transmitter, to perform intelligent decisions which improves the overall performance.Die Power-Line-Communication (PLC) ist die Technologie, bei der die Datensignale eines Kommunikationssystems über die Leiter einer Energieversorgungsinfrastruktur übertragen werden. Die einzigartige Umgebung der PLC-Kanäle stellt konkrete Herausforderungen und Anforderungen dar, die modelliert und analysiert werden müssen, um ein klares Verständnis des Kommunikationssystems zu erhalten und die Fähigkeit zur Verbesserung der Leistung und Zuverlässigkeit der Übertragung zu erreichen. Darüber hinaus ist in Kommunikationssystem die Nachfrage nach erhöhtem Datendurchsatz, sowie erhöhter Zuverlässigkeit und Robustheit der Übertragung von grundlegender Bedeutung. Um diesen Herausforderungen und Anforderungen gerecht zu werden, wird in dieser Arbeit das Konzept der Mehrkanal-PLC untersucht und weiterentwickelt. Die Mehrkanal-PLC wird in diesem Zusammenhang auf die Übertragung mehrerer informationstragenden Signale über den PLC-Kanal von einer Quelle zu einem Ziel bezogen. Wir untersuchen mehrere Szenarien der Mehrkanal-Datenübertragung, um die vielfältigen Anforderungen einer PLC-Übertragung zu behandeln. Eines der in dieser Arbeit besprochenen Mehrkanal-Szenarien ist die Multiple-Input-Multiple-Output-Übertragung (MIMO), bei der mehrere Datensignale über räumlich getrennte PLC-Kanäle übertragen werden. Ein weiteres Szenario, das in dieser Arbeit diskutiert wird, ist die kooperative Übertragung zwischen der Quelle und dem Ziel eines PLC-Systems mittels Zwischenrelais als Knoten im Netzwerk. Schließlich wird die Multiband-Übertragung unter Verwendung unterschiedlicher Teile des verfügbaren PLC-Spektrums untersucht. Das Kernziel dieser Arbeit ist es, neuartige Algorithmen und Modelle zu entwickeln und zu untersuchen, um die Herausforderungen und Probleme zu lösen, die in verschiedenen Szenarien der Mehrkanal-PLC existieren. Diese Probleme sind als das Kanalauswahlproblem für die MIMO-Übertragung, das Relaiauswahlproblem für die kooperative Kommunikation und das Spektrum-Zuweisungsproblem für die Multibandübertragung kategorisiert werden. Die Basis all dieser Probleme ist ein Entscheidungsproblem, das die Leistungsfähigkeit des Systems stark beeinflussen kann. Um diese Probleme lösen zu können, wird ein mathematisches Werkzeug, nämlich das mehrarmige Bandit-Modell, verwendet, um die verschiedenen Probleme zu modellieren, die sich in verschiedenen Szenarien der Mehrkanal-PLC ergeben. Dieser Modellierungsansatz wird als Baustein für die Entwicklung von maschinellen Lernalgorithmen verwendet, um die zuvor beschriebenen Auswahlprobleme zu lösen. Schließlich werden neuartige maschinelle Lernalgorithmen entwickelt und ihre Leistungen analysiert sowie bewertet. Es zeigt sich, dass der maschinelle Lernansatz die Leistungsfähigkeit der Mehrkanal-PLC-Systeme im Vergleich zu den bestehenden Ans\"atzen des Standes der Technik erheblich verbessern kann, indem es dem Auswahlagenten, d.h. dem PLC-Sender, ermöglicht, intelligente Entscheidungen durchzuführen, die die Gesamtleistung verbessern

Resource Allocation and Relay Selection for Multi-User OFDM-Based Cooperative Networks with SWIPT

In this paper, we investigate resource allocation and relay selection in a two-hop relay-assisted multi-user network, where the end users support Simultaneous Wireless Information and Power Transfer (SWIPT). In particular, we consider single source assisted by a set of spatially distributed relays able to amplify-and-forward orthogonal frequency division multiplexing (OFDM) signals carrying both data and power at the same time. The users are assumed to implement a power splitting technique where the received signal is orthogonally split in two streams of different power levels, where one signal stream is sent to the power harvesting module while the other is converted to baseband for information decoding. We aim at optimizing the users’ power splitting ratios as well as the relay, carrier and power assignment so that the end-users’ sum-rate is maximized subject to transmitted and harvested power constraints. Such joint optimization is combinatorial in nature with a non-convex structure. Therefore, we present a sub-optimal low complex solution based on the harmonic mean of the two-hop relay channel coefficients. Simulation results reveal that the proposed algorithm provides significant performance gains in comparison with a semi-random resource allocation and relay selection approach

Resource Allocation in Relay Networks

Demand for high data rates is increasing rapidly, due to the rapid rise of mobile data traffic volume. In order to meet the demands, the future generation of wireless communication systems has to support higher data rates and quality of service. The inherent unreliable and unpredictable nature of wireless medium provides a challenge for increasing the data rate. Cooperative communications, is a prominent technique to combat the detrimental fading effect in wireless communications. Adding relay nodes to the network, and creating s virtual multiple-input multiple-output (MIMO) antenna array is proven to be an efficient method to mitigate the multipath fading and expand the network coverage. Therefore, cooperative relaying is considered as a fundamental element in the Long Term Evolution (LTE)-Advanced standard. In this thesis, we address the problem of resource allocation in cooperative networks. We provide a detailed review on the resource allocation problem. We look at the joint subcarrier-relay assignment and power allocation. The objective of this optimization problem is to allocate the resources fairly, so even the cell-edge users with weakest communication links receive a fair share of resources. We propose a simple and practical algorithm to find the optimal solution. We assess the performance of the proposed algorithm by providing simulations. Furthermore, we investigate the optimality and complexity of the proposed algorithm. Due to the layered architecture of the wireless networks, to achieve the optimal performance it is necessary that the design of the algorithms be based on the underlying physical and link layers. For a cooperative network with correlated channels, we propose a cross-layer algorithm for relay selection, based on both the physical and link-layer characteristics, in order to maximize the linklayer throughput. The performance of the proposed algorithm is studied in different network models. Furthermore, we investigate the optimum number of relays required for cooperation in order to achieve maximum throughput. Buffering has proven to improve the performance of the cooperative network. In light of this, we study the performance of buffer-aided relay selection. In order to move one step closer to the practical applications, we consider a system with coded transmissions. We study three different coding schemes: convolutional code, Turbo code, and distributed Turbo code (DTC). For each scheme, the performance of the system is simulated and assessed analytically. We derive a closed form expression of the average throughput. Using the analysis results, we investigate the diversity gain of the system in asymptotic conditions. Further, we investigate the average transmission delay for different schemes