Network parameters impact on dynamic transmission power control in vehicular ad hoc networks

International audienceIn vehicular ad hoc networks, the dynamic change in transmission power is very effective to increase the throughput of the wireless vehicular network and decrease the delay of the message communication between vehicular nodes on the highway. Whenever an event occurs on the highway, the reliability of the communication in the vehicular network becomes so vital so that event created messages should reach to all the moving network nodes. It becomes necessary that there should be no interference from outside of the network and all the neighbor nodes should lie in the transmission range of the reference vehicular node. Transmission range is directly proportional to the transmission power the moving node. If the transmission power will be high, the interference increases that can cause higher delay in message reception at receiver end, hence the performance of the network decreased. In this paper, it is analyzed that how transmission power can be controlled by considering other different parameter of the network such as; density, distance between moving nodes, different types of messages dissemination with their priority, selection of an antenna also affects the transmission power. The dynamic control of transmission power in VANET serves also for the optimization of the resources where it needs, can be decreased and increased depending on the circumstances of the network. Different applications and events of different types also cause changes in transmission power to enhance the reachability. The analysis in this paper is comprised of density, distance with single hop and multi hop message broadcasting based dynamic transmission power control as well as antenna selection and applications based. Some summarized tables are produced according to the respective parameters of the vehicular network. At the end some valuable observations are made and discussed in detail

Efficient Information Dissemination in Vehicular Networks with Privacy Protection

Vehicular ad hoc network (VANET) is a key component of intelligent transportation System (ITS). In VANETs, vehicles and roadside units exchange information for the purpose of navigation, safe driving, entertainment and so on. The high mobility of vehicles makes efficient and private communications in VANETs a big challenge. Improving the performance of information dissemination while protecting data privacy is studied in this research. Meet-Table based information dissemination method is first proposed, so as to improve the information dissemination, and to efficiently distribute information via utilizing roadside units, Cloud Computing, and Fog Computing. A clustering algorithm is proposed as well, to improve the stability for self-organized cluster-based dissemination in VANETs on highways. Then, fuzzy neural networks are used to improve the stability and security of routing protocols, AODV, and design a novel protocol, GSS-AODV. To further protect data privacy, a multi-antenna based information protection approach for vehicle-to-vehicle(V2V) communications is also proposed

DESIGN OF EFFICIENT IN-NETWORK DATA PROCESSING AND DISSEMINATION FOR VANETS

By providing vehicle-to-vehicle and vehicle-to-infrastructure wireless communications, vehicular ad hoc networks (VANETs), also known as the “networks on wheels”, can greatly enhance traffic safety, traffic efficiency and driving experience for intelligent transportation system (ITS). However, the unique features of VANETs, such as high mobility and uneven distribution of vehicular nodes, impose critical challenges of high efficiency and reliability for the implementation of VANETs. This dissertation is motivated by the great application potentials of VANETs in the design of efficient in-network data processing and dissemination. Considering the significance of message aggregation, data dissemination and data collection, this dissertation research targets at enhancing the traffic safety and traffic efficiency, as well as developing novel commercial applications, based on VANETs, following four aspects: 1) accurate and efficient message aggregation to detect on-road safety relevant events, 2) reliable data dissemination to reliably notify remote vehicles, 3) efficient and reliable spatial data collection from vehicular sensors, and 4) novel promising applications to exploit the commercial potentials of VANETs. Specifically, to enable cooperative detection of safety relevant events on the roads, the structure-less message aggregation (SLMA) scheme is proposed to improve communication efficiency and message accuracy. The scheme of relative position based message dissemination (RPB-MD) is proposed to reliably and efficiently disseminate messages to all intended vehicles in the zone-of-relevance in varying traffic density. Due to numerous vehicular sensor data available based on VANETs, the scheme of compressive sampling based data collection (CS-DC) is proposed to efficiently collect the spatial relevance data in a large scale, especially in the dense traffic. In addition, with novel and efficient solutions proposed for the application specific issues of data dissemination and data collection, several appealing value-added applications for VANETs are developed to exploit the commercial potentials of VANETs, namely general purpose automatic survey (GPAS), VANET-based ambient ad dissemination (VAAD) and VANET based vehicle performance monitoring and analysis (VehicleView). Thus, by improving the efficiency and reliability in in-network data processing and dissemination, including message aggregation, data dissemination and data collection, together with the development of novel promising applications, this dissertation will help push VANETs further to the stage of massive deployment

A content dissemination framework for vehicular networking

Vehicular Networks are a peculiar class of wireless mobile networks in which vehicles are equipped with radio interfaces and are, therefore, able to communicate with fixed infrastructure (if available) or other vehicles. Content dissemination has a potential number of applications in vehicular networking, including advertising, traffic warnings, parking notifications and emergency announcements. This thesis addresses two possible dissemination strategies: i) Push-based that is aiming to proactively deliver information to a group of vehicles based on their interests and the level of matching content, and ii) Pull-based that is allowing vehicles to explicitly request custom information. Our dissemination framework is taking into consideration very specific information only available in vehicular networks: the geographical data produced by the navigation system. With its aid, a vehicle's mobility patterns become predictable. This information is exploited to efficiently deliver the content where it is needed. Furthermore, we use the navigation system to automatically filter information which might be relevant to the vehicles. Our framework has been designed and implemented in .NET C# and Microsoft MapPoint. It was tested using a small number of vehicles in the area of Cambridge, UK. Moreover, to prove the correctness of our protocols, we further evaluated it in a large-scale network simulation over a number of realistic vehicular trace-based scenarios. Finally, we built a test-case application aiming to prove that vehicles can gain from such a framework. In this application every vehicle collects and disseminates road traffic information. Vehicles that receive this information can individually evaluate the traffic conditions and take an alternative route, if needed. To evaluate this approach, we collaborated with UCLA's Network Research Lab (NRL), to build a simulator that combines network and dynamic mobility emulation simultaneously. When our dissemination framework is used, the drivers can considerably reduce their trip-times

Construction of a real vehicular delay-tolerant network testbed

Vehicular Delay-Tolerant Networks (VDTNs) appear as innovative network architecture, able to outline communication challenges caused by issues like variable delays, disruption and intermittent connectivity once that it utilizes the store-carry-and-forward method to allow that in-transit messages (called bundles) can be delivered to the destination by hopping over the mobile vehicles even that an end-to-end path does not exist. Since messages are stored persistently in a buffer and forward to the next hop, a new communication infrastructure is created allowing low-cost asynchronous opportunistic communication under the most critical situations like variable delays and bandwidth constraints. VDTN introduces a layered architecture, acting as an overlay network over the link layer, aggregating incoming IP packets in data bundles (large IP packets), using out-of-band signaling, based on the separation of the control plane and planes. This dissertation presents and evaluates the performance of a real VDTN testbed, demonstrating the real applicability of this new vehicular communication approach. It includes an embedded VDTN testbed created to evaluate safety systems in a real-world scenario. It was used cars with laptops to realize terminal and relay nodes. A real testbed is very important because some complex issues presented in vehicular communication systems can be treated with more realism in real-world environments than in a laboratory environment. The experiments were performed on the internal streets of Brazilian Fiat Automobile manufacturing plant. Performance measurements and analysis were also conduct to verify the efficiency of the system. The results obtained show that safety applications and services can be executed with the actual proposal VDTN architecture in several environments, although notable interference as fading and characteristics of the radio channel, require the use of more modern, appropriate and robust technologies. Thus, the real deployment of VDTNs confirms that VDTNs can be seen as a very promising technology for vehicular communications.Fundação para a Ciência e a Tecnologia (FCT

Evaluation of a cooperative ARQ protocol for delay-tolerant vehicular networks

This paper evaluates a Cooperative ARQ protocol to be used in delay-tolerant vehicular networks. The scenario consists in cars downloading information from Access Points along a road. The key difference between proposed Cooperative ARQ protocols is when the cooperation takes place. Simply C-ARQ cooperation occurs in a packet-by-packet basis. In this proposal, that we call DC-ARQ (Delayed Cooperative ARQ), the cooperation is delayed until cars are out of the coverage area of the Access Point. The scheme has been evaluated through simulations. A comparison of DC-ARQ with a baseline case in which no cooperation is used has been performed under different vehicle densities scenarios.Peer ReviewedPostprint (author’s final draft

A Survey on Multihop Ad Hoc Networks for Disaster Response Scenarios

Disastrous events are one of the most challenging applications of multihop ad hoc networks due to possible damages of existing telecommunication infrastructure.The deployed cellular communication infrastructure might be partially or completely destroyed after a natural disaster. Multihop ad hoc communication is an interesting alternative to deal with the lack of communications in disaster scenarios. They have evolved since their origin, leading to differentad hoc paradigms such as MANETs, VANETs, DTNs, or WSNs.This paper presents a survey on multihop ad hoc network paradigms for disaster scenarios.It highlights their applicability to important tasks in disaster relief operations. More specifically, the paper reviews the main work found in the literature, which employed ad hoc networks in disaster scenarios.In addition, it discusses the open challenges and the future research directions for each different ad hoc paradigm

Encounter gossip: a high coverage broadcast protocol for MANET

PhD ThesisMobile Ad-hoc Networks (MANETs) allow deployment of mobile wireless devices or nodes in a range of environments without any fixed infrastructure and hence at a minimal setup cost. Broadcast support that assures a high coverage (i.e., a large fraction of nodes receiving a broadcast) is essential for hosting user applications, and is also non-trivial to achieve due to the nature of devices and mobility. We propose Encounter Gossip, a novel broadcast protocol, which holds minimal state and is unaware of network topology. Coverage obtained can be made arbitrarily close to 1 at a moderate cost of extra message tra c, even in partition-prone networks. Under certain simplifying assumptions, it is shown that a high coverage is achieved by making a total of O(n ln n) broadcasts, where n is the number of nodes, and the time to propagate a message is O(ln n). The e ect of various network parameters on the protocol performance is examined. We then propose modifications to minimise the number of redundant transmissions without compromising the achieved coverage. Two approaches are pursued: timer based and history based. The e ectiveness of each of these approaches is assessed through an extensive set of simulation experiments in the context of two mobility models. Specifically, we introduce a new heuristic alpha policy which achieves significant reduction in redundancy with negligible reduction in coverage. A generalisation to multiple broadcasts proceeding in parallel is proposed and the protocol is refined to reduce problems that can occur due to the effects of high mobility when transmitting a large number of messages. Finally, we implement and validate Encounter Gossip in the context of a real-life mobile ad-hoc network. All these investigations suggest that the protocol, together with the proposed modifications and re nements, is suited to MANETs of varying degrees of node densities and speeds

Hybrid Satellite-Terrestrial Communication Networks for the Maritime Internet of Things: Key Technologies, Opportunities, and Challenges

With the rapid development of marine activities, there has been an increasing number of maritime mobile terminals, as well as a growing demand for high-speed and ultra-reliable maritime communications to keep them connected. Traditionally, the maritime Internet of Things (IoT) is enabled by maritime satellites. However, satellites are seriously restricted by their high latency and relatively low data rate. As an alternative, shore & island-based base stations (BSs) can be built to extend the coverage of terrestrial networks using fourth-generation (4G), fifth-generation (5G), and beyond 5G services. Unmanned aerial vehicles can also be exploited to serve as aerial maritime BSs. Despite of all these approaches, there are still open issues for an efficient maritime communication network (MCN). For example, due to the complicated electromagnetic propagation environment, the limited geometrically available BS sites, and rigorous service demands from mission-critical applications, conventional communication and networking theories and methods should be tailored for maritime scenarios. Towards this end, we provide a survey on the demand for maritime communications, the state-of-the-art MCNs, and key technologies for enhancing transmission efficiency, extending network coverage, and provisioning maritime-specific services. Future challenges in developing an environment-aware, service-driven, and integrated satellite-air-ground MCN to be smart enough to utilize external auxiliary information, e.g., sea state and atmosphere conditions, are also discussed