Evaluating Cache Coherent Shared Virtual Memory for Heterogeneous Multicore Chips

The trend in industry is towards heterogeneous multicore processors (HMCs), including chips with CPUs and massively-threaded throughput-oriented processors (MTTOPs) such as GPUs. Although current homogeneous chips tightly couple the cores with cache-coherent shared virtual memory (CCSVM), this is not the communication paradigm used by any current HMC. In this paper, we present a CCSVM design for a CPU/MTTOP chip, as well as an extension of the pthreads programming model, called xthreads, for programming this HMC. Our goal is to evaluate the potential performance benefits of tightly coupling heterogeneous cores with CCSVM

Memory performance of and-parallel prolog on shared-memory architectures

The goal of the RAP-WAM AND-parallel Prolog abstract architecture is to provide inference speeds significantly beyond those of sequential systems, while supporting Prolog semantics and preserving sequential performance and storage efficiency. This paper presents simulation results supporting these claims with special emphasis on memory performance on a two-level sharedmemory multiprocessor organization. Several solutions to the cache coherency problem are analyzed. It is shown that RAP-WAM offers good locality and storage efficiency and that it can effectively take advantage of broadcast caches. It is argued that speeds in excess of 2 ML IPS on real applications exhibiting medium parallelism can be attained with current technology

An Implementation of a Dual-Processor System on FPGA

In recent years, Field-Programmable Gate Arrays (FPGA) have evolved rapidly paving the way for a whole new range of computing paradigms. On the other hand, computer applications are evolving. There is a rising demand for a system that is general-purpose and yet has the processing abilities to accommodate current trends in application processing. This work proposes a design and implementation of a tightly-coupled FPGA-based dual-processor platform. We architect a platform that optimizes the utilization of FPGA resources and allows for the investigation of practical implementation issues such as cache design. The performance of the proposed prototype is then evaluated, as different configurations of a uniprocessor and a dual-processor system are studied and compared against each other and against published results for common industry-standard CPU platforms. The proposed implementation utilizes the Nios II 32-bit embedded soft-core processor architecture designed for the Altera Cyclone III family of FPGAs

Distributed modular RT-systems for detector DAQ, trigger and control applications

A modular approach to development of distributed modular system architecture for detector control, data acquisition and trigger data processing is proposed. A multilevel parallel-pipeline model of data acquisition, processing and control is proposed and discussed. Multiprocessor architecture with SCI-based interconnections is proposed as good high-performance system for parallel-pipeline data processing. A network (Ethernet -100) can be used for loading, monitoring and diagnostic purposes independent of basic interconnections. The modular cPCI-based structures with high speed modular interconnections are proposed for DAQ and control applications. For distributed control RT-systems, to construct the effective (cost-performance) systems the same platform of an Intel compatible processor board should be used. The basic computer multiprocessor nodes consist of high-power PC MB (Industrial Computer Systems), which are interconnected by SCI modules and link to embedded microprocessor-based sub-systems for control applications. The required number of multiprocessor nodes should be interconnected by SCI for parallel-pipeline data processing in real time (according to the multilevel model) and link to RT-systems for embedded control. (19 refs)

CoreVA-MPSoC: A Many-core Architecture with Tightly Coupled Shared and Local Data Memories

Ax J, Sievers G, Daberkow J, et al. CoreVA-MPSoC: A Many-core Architecture with Tightly Coupled Shared and Local Data Memories. IEEE Transactions on Parallel and Distributed Systems. 2018;29(5):1030-1043

Energy-Efficient Hardware-Accelerated Synchronization for Shared-L1-Memory Multiprocessor Clusters

The steeply growing performance demands for highly power- and energy-constrained processing systems such as end-nodes of the Internet-of-Things (IoT) have led to parallel near-threshold computing (NTC), joining the energy-efficiency benefits of low-voltage operation with the performance typical of parallel systems. Shared-L1-memory multiprocessor clusters are a promising architecture, delivering performance in the order of GOPS and over 100 GOPS/W of energy-efficiency. However, this level of computational efficiency can only be reached by maximizing the effective utilization of the processing elements (PEs) available in the clusters. Along with this effort, the optimization of PE-to-PE synchronization and communication is a critical factor for performance. In this article, we describe a light-weight hardware-accelerated synchronization and communication unit (SCU) for tightly-coupled clusters of processors. We detail the architecture, which enables fine-grain per-PE power management, and its integration into an eight-core cluster of RISC-V processors. To validate the effectiveness of the proposed solution, we implemented the eight-core cluster in advanced 22 nm FDX technology and evaluated performance and energy-efficiency with tunable microbenchmarks and a set of rea-life applications and kernels. The proposed solution allows synchronization-free regions as small as 42 cycles, over 41 smaller than the baseline implementation based on fast test-and-set access to L1 memory when constraining the microbenchmarks to 10 percent synchronization overhead. When evaluated on the real-life DSP-applications, the proposed SCU improves performance by up to 92 and 23 percent on average and energy efficiency by up to 98 and 39 percent on average

Methods for Performance Evaluation of Parallel Computer Systems

Although parallel computers have existed for many years, recently there has been a surge of academic, industrial and governmental interest in parallel computing. Commercially manufactured parallel computers have started to become available. Many new experimental parallel architectures are reported in the literature every year. Software for many types of applications, from scientific number crunching to artificial intelligence, is being written to run on parallel machines. Performance is an essential consideration both in the design of new systems and the deployment of existing systems. Users of computers wish to utilize their hardware and software systems as efficiently as possible. Over the years, a field known as computer performance evaluation has arisen to address the problem of quantifying and predicting computer performance. Methods exist that can determine how efficiently a system's resources are being used. These can help track down the probable causes of performance problems

Synthesis of application specific processor architectures for ultra-low energy consumption

In this paper we suggest that further energy savings can be achieved by a new approach to synthesis of embedded processor cores, where the architecture is tailored to the algorithms that the core executes. In the context of embedded processor synthesis, both single-core and many-core, the types of algorithms and demands on the execution efficiency are usually known at the chip design time. This knowledge can be utilised at the design stage to synthesise architectures optimised for energy consumption. Firstly, we present an overview of both traditional energy saving techniques and new developments in architectural approaches to energy-efficient processing. Secondly, we propose a picoMIPS architecture that serves as an architectural template for energy-efficient synthesis. As a case study, we show how the picoMIPS architecture can be tailored to an energy efficient execution of the DCT algorithm