The history of WiMAX: a complete survey of the evolution in certification and standarization for IEEE 802.16 and WiMAX

Most researchers are familiar with the technical features of WiMAX technology but the evolution that WiMAX went through, in terms of standardization and certification, is missing and unknown to most people. Knowledge of this historical process would however aid to understand how WiMAX has become the widespread technology that it is today. Furthermore, it would give insight in the steps to undertake for anyone aiming at introducing a new wireless technology on a worldwide scale. Therefore, this article presents a survey on all relevant activities that took place within three important organizations: the 802.16 Working Group of the IEEE (Institute of Electrical and Electronics Engineers) for technology development and standardization, the WiMAX Forum for product certification and the ITU (International Telecommunication Union) for international recognition. An elaborated and comprehensive overview of all those activities is given, which reveals the importance of the willingness to innovate and to continuously incorporate new ideas in the IEEE standardization process and the importance of the WiMAX Forum certification label granting process to ensure interoperability. We also emphasize the steps that were taken in cooperating with the ITU to improve the international esteem of the technology. Finally, a WiMAX trend analysis is made. We showed how industry interest has fluctuated over time and quantified the evolution in WiMAX product certification and deployments. It is shown that most interest went to the 2.5 GHz and 3.5GHz frequencies, that most deployments are in geographic regions with a lot of developing countries and that the highest people coverage is achieved in Asia Pacific. This elaborated description of all standardization and certification activities, from the very start up to now, will make the reader comprehend how past and future steps are taken in the development process of new WiMAX features

Multicast broadcast services support in OFDMA-based WiMAX systems [Advances in mobile multimedia]

Multimedia stream service provided by broadband wireless networks has emerged as an important technology and has attracted much attention. An all-IP network architecture with reliable high-throughput air interface makes orthogonal frequency division multiplexing access (OFDMA)-based mobile worldwide interoperability for microwave access (mobile WiMAX) a viable technology for wireless multimedia services, such as voice over IP (VoIP), mobile TV, and so on. One of the main features in a WiMAX MAC layer is that it can provide'differentiated services among different traffic categories with individual QoS requirements. In this article, we first give an overview of the key aspects of WiMAX and describe multimedia broadcast multicast service (MBMS) architecture of the 3GPP. Then, we propose a multicast and broadcast service (MBS) architecture for WiMAX that is based on MBMS. Moreover, we enhance the MBS architecture for mobile WiMAX to overcome the shortcoming of limited video broadcast performance over the baseline MBS model. We also give examples to demonstrate that the proposed architecture can support better mobility and offer higher power efficiency

Mobile WiMAX system performance – simulated versus experimental results

This paper addresses the downlink performance of mobile WiMAX operating at 2.3GHz in an urban environment. The analysis includes a comparison of simulated and experimental results. Simulated packet error rate (PER) versus Signal to Noise Ratio (SNR) graphs are generated on a per link-speed basis using a fully compliant 512 carrier mobile WiMAX simulator. Experimental data is gathered using a carrier-class basestation, a mobile-WiMAX enabled laptop, and a suite of application layer logging software. An H264 AVC encoder and IP packetisation unit is used to transmit video to a mobile client. Results show strong agreement in terms of simulated and captured PER. Using this data, the downlink operating range is evaluated as a function of the Effective Isotropic Radiated Power (EIRP) and path loss exponent. Results indicate that at low EIRP (32 dBm) the expected outdoor operating range is around 200-400m. Applying the UK OFCOM regulations for licensed operation in the 2.5GHz band, downlink operation in excess of 2km can be achieved

Characteristics of chicken slaughterhouse wastewater

The chicken slaughterhouse wastewater is a class of wastewater, which is heavily polluted with organic matters including proteins, blood residues, fats and lard. Therefore, the direct discharged of untreated chicken slaughterhouse wastewater into the environment is associated with the occurrence of eutrophication phenomenon. In the present study, the characteristics of chicken slaughterhouse wastewater were investigated to ascertain the role of these wastes in the adverse effect on the environment and natural water system. The parameter tested included biological oxygen demand (BOD), chemical oxygen demand (COD), total suspended solid (TSS), total nitrogen (TN), total organic carbon (TOC), orthophosphate (PO4 3-), temperature and pH. The results revealed available high concentrations of BOD (1,341 - 1,821 ± 242.7 mg L1 ), COD (3,154.19 - 7,719.3 ± 2,282.69 mg L-1), TSS (377.67 - 5,462 ± 2,696.1 mg L-1) which have exceeded the EQA1974 standard limits for disposal of wastewater into the environment. The concentrations of TN (162.6 -563.8 ± 215 mg L-1) and PO4 3- (7.047 - 17.111 ± 4.25 mg L-1) were within the range required for microalgae growth which confirm their role in the occurrence of eutrophication phenomenon. It can be concluded that the direct discharge of chicken slaughterhouse wastewater contributes negatively on the environmental biodiversity and thus they should be subjected for an effective treated before the final disposal

Improving the Forward Link of the Future Airport Data Link by Space-Time Coding

In the context of the future communication system for the airport surface operations (AeroMACS), we investigate the 2×1 Alamouti scheme applied to the 802.16e standard for improving the performance of the forward link. We propose a novel space-time coding realization which preserves the original frame structure of WiMAX, analyzing its performance in a realistic airport environment. Simulation results show the performance of the system over different scenarios

Real-time validation of a SDR implementation of TDD WiMAX standard

[Abstract]: This paper focuses on the validation of an innovative software- defined radio architecture for a WiMAX system based on commercially available field-programmable gate array and digital signal processor modules. We provide a realtime implementation of a standard-compliant time-division duplex physical layer including a mobile and a base station as well as downlink and uplink communications, thus obtaining a full-featured physical layer. Additionally, a set of different configurations are supported as described in the standard and in the WiMAX Forum. The main contribution of the paper consists in a reproducible and repeatable validation of the implementation in representative scenarios. At the same time, a characterization of the performance exhibited by the system is provided based on bit error rate measurements carried out using a custom-made, real-time channel emulator.This work has been partially supported by Indra Sistemas S.A. and the Spanish Ministry of Defence with the technical direction of PEC/ITM under grant DN8644-COINCIDENTE. The authors wish to thank J. M. Camas- Albar from Indra Sistemas S.A. for his help. This work has been additionally funded by Xunta de Galicia, Ministerio de Ciencia e Innovación of Spain, and FEDER funds of the European Union under grants with numbers 10TIC003CT, 09TIC008105PR, TEC2010-19545- C04-01, and CSD2008-00010.Xunta de Galicia; 10TIC003CTXunta de Galicia; 09TIC008105P