Maximizing signal to leakage ratios in MIMO BCH cooperative beamforming scheme

Beamforming (BF) technique in cooperative multiple input multiple output (MIMO) antenna arrays improves signal to noise ratio (SNR) of the intended user. The challenge is to design transmit beamforming vectors for every user while limiting the co-channel interference (CCI) from other users. In this paper, we proposed cooperative beamforming based on Signal-to-Leakage Ratio (SLR) to exploit the leakage power as a useful power in the second time slot after user cooperation, for this purpose successive interference cancellation (SIC) is employed in each user to separate the leakage signal from the desired signal. Without increasing the complexity, Maximizing Signal-to-Leakage Ratio (SLR) subject to proposed power constraint instead of a unity norm is the way to achieve extra leakage power. To reduce the erroneous, Bose–Chaudhuri–Hocquenghem (BCH) codes employed in Beamforming of (SIC) cooperative scheme BF(CS-SIC-BCH). Maximum-likelihood (ML) estimator method is used at each user receiver. Simulation results show that the performance of the proposed scheme BF (CS-SIC-BCH) over Rayleigh and Rician fading channel is significantly better than the performance beamforming based on SLR in Non-cooperative system. More specifically to achieve a BER of about the required SNR for the proposed scheme is about 1 dB less than the Non-cooperative system

Multi-Step Knowledge-Aided Iterative ESPRIT for Direction Finding

In this work, we propose a subspace-based algorithm for DOA estimation which iteratively reduces the disturbance factors of the estimated data covariance matrix and incorporates prior knowledge which is gradually obtained on line. An analysis of the MSE of the reshaped data covariance matrix is carried out along with comparisons between computational complexities of the proposed and existing algorithms. Simulations focusing on closely-spaced sources, where they are uncorrelated and correlated, illustrate the improvements achieved.Comment: 7 figures. arXiv admin note: text overlap with arXiv:1703.1052

Location-Based Beamforming and Physical Layer Security in Rician Wiretap Channels

We propose a new location-based beamforming (LBB) scheme for wiretap channels, where a multi-antenna source communicates with a single-antenna legitimate receiver in the presence of a multi-antenna eavesdropper. We assume that all channels are in a Rician fading environment, the channel state information from the legitimate receiver is perfectly known at the source, and that the only information on the eavesdropper available at the source is her location. We first describe how the optimal beamforming vector that minimizes the secrecy outage probability of the system is obtained, illustrating its dependence on the eavesdropper's location. We then derive an easy-to-compute expression for the secrecy outage probability when our proposed LBB scheme is adopted. We also consider the positive impact a friendly jammer can have on our beamforming solution, showing how the path to optimality remains the same. Finally, we investigate the impact of location uncertainty on the secrecy outage probability, showing how our solution can still allow for secrecy even when the source only has a noisy estimate of the eavesdropper's location. Our work demonstrates how a multi-antenna array, operating in the most general channel conditions and most likely system set-up, can be configured rapidly in the field so as to deliver an optimal physical layer security solution.Comment: 11 pages, 8 figures. Accepted for publication in IEEE Transactions on Wireless Communications. arXiv admin note: substantial text overlap with arXiv:1510.0856

Space time transceiver design over multipath fading channels

Imperial Users onl

Performance of quantized random beamforming in delay-tolerant machine-type communication

Machine-to-machine (M2M) communication represents a new paradigm for mobile cellular networks, where a massive number of low-cost devices request the transfer of small amounts of data without human intervention. One option to tackle this problem is obtained by combining random beamforming (RBF) with opportunistic scheduling. RBF can be used to induce larger channel fluctuations, and opportunistic scheduling can be used to select M2M devices when their overall channel quality is good. Traditional RBF does not fulfill M2M requirements, because overall channel quality needs to be tracked continuously. In order to tackle this limitation, a novel codebook-based RBF architecture that identifies in advance the time instants in which overall channel quality should be reported, within a coherence time window, is proposed. This opportunistic feedback mechanism reduces signaling overhead and enables energy saving at M2M devices. A simplified methodology is presented to evaluate the system mean data rate, using for this purpose closed form formulas derived from SNR distribution approximations. Results reveal that the performance loss that is experienced for introducing the proposed modifications to traditional RBF scheme is negligible. The concepts analyzed in this paper provide useful insights, and show that codebook-based RBF with simplified opportunistic scheduling algorithms is an excellent combination to provide wide-area M2M services with low-cost devices and limited signaling overhead.Fil: Dowhuszko, Alexis Alfredo. Centre Tecnològic de Les Telecomunicacions de Catalunya; España. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Corral Briones, Graciela. Universidad Nacional de Córdoba; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Estudios Avanzados en Ingeniería y Tecnología. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Instituto de Estudios Avanzados en Ingeniería y Tecnología; ArgentinaFil: Hamalainen, Jyri. Aalto University; FinlandiaFil: Wichman, Risto Ilari. Aalto University; Finlandi

Analysis of multiuser MIMO downlink networks using linear transmitter and receivers

In contrast to dirty-paper coding (DPC) which is largely information theoretic, this paper proposes a linear codec that can spatially multiplex the multiuser signals to realize the rich capacity of multiple-input multiple-output (MIMO) downlink broadcast (point-to-multipoint) channels when channel state information (CSI) is available at the transmitter. Assuming single-stream (or single-mode) communication for each user, we develop an iterative algorithm, which is stepwise optimal, to obtain the multiuser antenna weights accomplishing orthogonal space-division multiplexing (OSDM). The steady state solution has a straightforward interpretation and requires only maximal-ratio combiners (MRC) at the mobile stations to capture the optimized spatial modes. Our main contribution is that the proposed scheme can greatly reduce the processing complexity (at least by a factor of the number of base station antennas) while maintaining the same error performance when compared to a recently published OSDM method. Intensive computer simulations show that the proposed scheme promises to provide multiuser diversity in addition to user separation in the spatial domain so that both diversity and multiplexing can be obtained at the same time for multiuser scenario. © 2004 Hindawi Publishing Corporation.published_or_final_versio

Adaptive antennas at the mobile and base stations in an OFDM/TDMA system

In recent years, several smart antenna systems have been proposed and demonstrated at the base station (BS) of wire-less communications systems, and these have shown that significant system performance improvement is possible. In this paper, we consider the use of adaptive antennas at the BS and mobile stations (MS), operating jointly, in combination with orthogonal frequency-division multiplexing. The advantages of the proposed system includes reductions in average error probability and increases in capacity compared to conventional systems. Multiuser access, in space, time, and through subcarriers, is also possible and expressions for the exact joint optimal antenna weights at the BS and MS under cochannel interference conditions for fading channels are derived. To demonstrate the potential of our proposed system, analytical along with Monte Carlo simulation results are provided

Novel transmission and beamforming strategies for multiuser MIMO with various CSIT types

In multiuser multi-antenna wireless systems, the transmission and beamforming strategies that achieve the sum rate capacity depend critically on the acquisition of perfect Channel State Information at the Transmitter (CSIT). Accordingly, a high-rate low-latency feedback link between the receiver and the transmitter is required to keep the latter accurately and instantaneously informed about the CSI. In realistic wireless systems, however, only imperfect CSIT is achievable due to pilot contamination, estimation error, limited feedback and delay, etc. As an intermediate solution, this thesis investigates novel transmission strategies suitable for various imperfect CSIT scenarios and the associated beamforming techniques to optimise the rate performance. First, we consider a two-user Multiple-Input-Single-Output (MISO) Broadcast Channel (BC) under statistical and delayed CSIT. We mainly focus on linear beamforming and power allocation designs for ergodic sum rate maximisation. The proposed designs enable higher sum rate than the conventional designs. Interestingly, we propose a novel transmission framework which makes better use of statistical and delayed CSIT and smoothly bridges between statistical CSIT-based strategies and delayed CSIT-based strategies. Second, we consider a multiuser massive MIMO system under partial and statistical CSIT. In order to tackle multiuser interference incurred by partial CSIT, a Rate-Splitting (RS) transmission strategy has been proposed recently. We generalise the idea of RS into the large-scale array. By further exploiting statistical CSIT, we propose a novel framework Hierarchical-Rate-Splitting that is particularly suited to massive MIMO systems. Third, we consider a multiuser Millimetre Wave (mmWave) system with hybrid analog/digital precoding under statistical and quantised CSIT. We leverage statistical CSIT to design digital precoder for interference mitigation while all feedback overhead is reserved for precise analog beamforming. For very limited feedback and/or very sparse channels, the proposed precoding scheme yields higher sum rate than the conventional precoding schemes under a fixed total feedback constraint. Moreover, a RS transmission strategy is introduced to further tackle the multiuser interference, enabling remarkable saving in feedback overhead compared with conventional transmission strategies. Finally, we investigate the downlink hybrid precoding for physical layer multicasting with a limited number of RF chains. We propose a low complexity algorithm to compute the analog precoder that achieves near-optimal max-min performance. Moreover, we derive a simple condition under which the hybrid precoding driven by a limited number of RF chains incurs no loss of optimality with respect to the fully digital precoding case.Open Acces