Quality assessment technique for ubiquitous software and middleware

The new paradigm of computing or information systems is ubiquitous computing systems. The technology-oriented issues of ubiquitous computing systems have made researchers pay much attention to the feasibility study of the technologies rather than building quality assurance indices or guidelines. In this context, measuring quality is the key to developing high-quality ubiquitous computing products. For this reason, various quality models have been defined, adopted and enhanced over the years, for example, the need for one recognised standard quality model (ISO/IEC 9126) is the result of a consensus for a software quality model on three levels: characteristics, sub-characteristics, and metrics. However, it is very much unlikely that this scheme will be directly applicable to ubiquitous computing environments which are considerably different to conventional software, trailing a big concern which is being given to reformulate existing methods, and especially to elaborate new assessment techniques for ubiquitous computing environments. This paper selects appropriate quality characteristics for the ubiquitous computing environment, which can be used as the quality target for both ubiquitous computing product evaluation processes ad development processes. Further, each of the quality characteristics has been expanded with evaluation questions and metrics, in some cases with measures. In addition, this quality model has been applied to the industrial setting of the ubiquitous computing environment. These have revealed that while the approach was sound, there are some parts to be more developed in the future

A study of QoS support for real time multimedia communication over IEEE802.11 WLAN : a thesis presented in partial fulfillment of the requirements for the degree of Master of Engineering in Computer Systems Engineering, Massey University, Albany, New Zealand

Quality of Service (QoS) is becoming a key problem for Real Time (RT) traffic transmitted over Wireless Local Area Network (WLAN). In this project the recent proposals for enhanced QoS performance for RT multimedia is evaluated and analyzed. Two simulation models for EDCF and HCF protocols are explored using OPNET and NS-2 simulation packages respectively. From the results of the simulation, we have studied the limitations of the 802.1 le standard for RT multimedia communication and analysed the reasons of the limitations happened and proposed the solutions for improvement. Since RT multimedia communication encompasses time-sensitive traffic, the measure of quality of service generally is minimal delay (latency) and delay variation (jitter). 802.11 WLAN standard focuses on the PHY layer and the MAC layer. The transmitted data rate on PHY layer are increased on standards 802.1 lb, a, g, j, n by different code mapping technologies while 802.1 le is developed specially for the QoS performance of RT-traffics at the MAC layer. Enhancing the MAC layer protocols are the significant topic for guaranteeing the QoS performance of RT-traffics. The original MAC protocols of 802.11 are DCF (Distributed Coordination Function) and PCF (Point Coordinator Function). They cannot achieve the required QoS performance for the RT-traffic transmission. IEEE802.lle draft has developed EDCF and HCF instead. Simulation results of EDCF and HCF models that we explored by OPNET and NS-2, show that minimal latency and jitter can be achieved. However, the limitations of EDCF and HCF are identified from the simulation results. EDCF is not stable under the high network loading. The channel utilization is low by both protocols. Furthermore, the fairness index is very poor by the HCF. It means the low priority traffic should starve in the WLAN network. All these limitations are due to the priority mechanism of the protocols. We propose a future work to develop dynamic self-adaptive 802.11c protocol as practical research directions. Because of the uncertainly in the EDCF in the heavy loading, we can add some parameters to the traffic loading and channel condition efficiently. We provide indications for adding some parameters to increase the EDCF performance and channel utilization. Because all the limitations are due to the priority mechanism, the other direction is doing away with the priority rule for reasonable bandwidth allocation. We have established that the channel utilization can be increased and collision time can be reduced for RT-traffics over the EDCF protocol. These parameters can include loading rate, collision rate and total throughput saturation. Further simulation should look for optimum values for the parameters. Because of the huge polling-induced overheads, HCF has the unsatisfied tradeoff. This leads to poor fairness and poor throughput. By developing enhanced HCF it may be possible to enhance the RI polling interval and TXOP allocation mechanism to get better fairness index and channel utilization. From the simulation, we noticed that the traffics deployment could affect the total QoS performance, an indication to explore whether the classification of traffics deployments to different categories is a good idea. With different load-based traffic categories, QoS may be enhanced by appropriate bandwidth allocation Strategy

Mobile integrated conditional access system

This paper presents design of a novel security architecture integrating mobile and broadcasting technologies in the Pay-TV system. The security architecture proposed herein is a state-of-the-art solution to tackle well-known problems challenging current Pay-TV systems including but not limited to interoperability amongst service providers, relatively high cost of the service deployment, the security compromise, limited interactivity and bespoken services offered to subscribers. It also proposes the Follow-me service that enables subscribers to access their entitlements via an arbitrary set-top box

In-home monitoring system based on WiFi fingerprints for ambient assisted living

This paper presents an in-home monitoring system based on WiFi fingerprints for Ambient Assisted Living. WiFi fingerprints are used to continuously locate a patient at the different rooms in her/his home. The experiments performed provide a correctly location rate of 96% in the best case of all studied scenarios. The behavior obtained by location monitoring allows to detect anomalous behavior such as long stays in rooms out of the common schedule. The main characteristics of the presented system are: a) it is robust enough to work without an own WiFi access point, which in turn means a very affordable solution; b) low obtrusiveness, as it is based on the use of a mobile phone; c) highly interoperable with other wireless connections (bluetooth, RFID) present in current mobile phones; d) alarms are triggered when any anomalous behavior is detected

Development of wireless control and automation systems

Ph.DDOCTOR OF PHILOSOPH

Child monitoring system (CHILD)

Nowadays, Bluetooth is a common way to connect and transfer information between things such as cell phones, laptops and PCs, printers, and digital cameras. The idea of using Bluetooth technology also a big motivation as it is interested in obtaining a much more comprehensive understanding of how it works. The goal of this project is to design a controller that will be able to run a DC motor wirelessly using Bluetooth technology. This controller will be able to function through a software application on a laptop or desktop computer from within a distance of the motor. This project involved three main parts to be developed, which are hardware, circuit and software. The hardware parts consists the materials that are used to build. The circuit part consists of the microcontroller circuit, because the microcontroller is known as a brain of the circuit. All the movement will be assigned by using microcontroller. The software part is to design the programming that will be used to assign an angle of movement for each DC motor