A Priority-based Fair Queuing (PFQ) Model for Wireless Healthcare System

Healthcare is a very active research area, primarily due to the increase in the elderly population that leads to increasing number of emergency situations that require urgent actions. In recent years some of wireless networked medical devices were equipped with different sensors to measure and report on vital signs of patient remotely. The most important sensors are Heart Beat Rate (ECG), Pressure and Glucose sensors. However, the strict requirements and real-time nature of medical applications dictate the extreme importance and need for appropriate Quality of Service (QoS), fast and accurate delivery of a patient’s measurements in reliable e-Health ecosystem. As the elderly age and older adult population is increasing (65 years and above) due to the advancement in medicine and medical care in the last two decades; high QoS and reliable e-health ecosystem has become a major challenge in Healthcare especially for patients who require continuous monitoring and attention. Nevertheless, predictions have indicated that elderly population will be approximately 2 billion in developing countries by 2050 where availability of medical staff shall be unable to cope with this growth and emergency cases that need immediate intervention. On the other side, limitations in communication networks capacity, congestions and the humongous increase of devices, applications and IOT using the available communication networks add extra layer of challenges on E-health ecosystem such as time constraints, quality of measurements and signals reaching healthcare centres. Hence this research has tackled the delay and jitter parameters in E-health M2M wireless communication and succeeded in reducing them in comparison to current available models. The novelty of this research has succeeded in developing a new Priority Queuing model ‘’Priority Based-Fair Queuing’’ (PFQ) where a new priority level and concept of ‘’Patient’s Health Record’’ (PHR) has been developed and integrated with the Priority Parameters (PP) values of each sensor to add a second level of priority. The results and data analysis performed on the PFQ model under different scenarios simulating real M2M E-health environment have revealed that the PFQ has outperformed the results obtained from simulating the widely used current models such as First in First Out (FIFO) and Weight Fair Queuing (WFQ). PFQ model has improved transmission of ECG sensor data by decreasing delay and jitter in emergency cases by 83.32% and 75.88% respectively in comparison to FIFO and 46.65% and 60.13% with respect to WFQ model. Similarly, in pressure sensor the improvements were 82.41% and 71.5% and 68.43% and 73.36% in comparison to FIFO and WFQ respectively. Data transmission were also improved in the Glucose sensor by 80.85% and 64.7% and 92.1% and 83.17% in comparison to FIFO and WFQ respectively. However, non-emergency cases data transmission using PFQ model was negatively impacted and scored higher rates than FIFO and WFQ since PFQ tends to give higher priority to emergency cases. Thus, a derivative from the PFQ model has been developed to create a new version namely “Priority Based-Fair Queuing-Tolerated Delay” (PFQ-TD) to balance the data transmission between emergency and non-emergency cases where tolerated delay in emergency cases has been considered. PFQ-TD has succeeded in balancing fairly this issue and reducing the total average delay and jitter of emergency and non-emergency cases in all sensors and keep them within the acceptable allowable standards. PFQ-TD has improved the overall average delay and jitter in emergency and non-emergency cases among all sensors by 41% and 84% respectively in comparison to PFQ model

Internet of Things-aided Smart Grid: Technologies, Architectures, Applications, Prototypes, and Future Research Directions

Traditional power grids are being transformed into Smart Grids (SGs) to address the issues in existing power system due to uni-directional information flow, energy wastage, growing energy demand, reliability and security. SGs offer bi-directional energy flow between service providers and consumers, involving power generation, transmission, distribution and utilization systems. SGs employ various devices for the monitoring, analysis and control of the grid, deployed at power plants, distribution centers and in consumers' premises in a very large number. Hence, an SG requires connectivity, automation and the tracking of such devices. This is achieved with the help of Internet of Things (IoT). IoT helps SG systems to support various network functions throughout the generation, transmission, distribution and consumption of energy by incorporating IoT devices (such as sensors, actuators and smart meters), as well as by providing the connectivity, automation and tracking for such devices. In this paper, we provide a comprehensive survey on IoT-aided SG systems, which includes the existing architectures, applications and prototypes of IoT-aided SG systems. This survey also highlights the open issues, challenges and future research directions for IoT-aided SG systems

Models and Methods for Network Selection and Balancing in Heterogeneous Scenarios

The outbreak of 5G technologies for wireless communications can be considered a response to the need for widespread coverage, in terms of connectivity and bandwidth, to guarantee broadband services, such as streaming or on-demand programs offered by the main television networks or new generation services based on augmented and virtual reality (AR / VR). The purpose of the study conducted for this thesis aims to solve two of the main problems that will occur with the outbreak of 5G, that is, the search for the best possible connectivity, in order to offer users the resources necessary to take advantage of the new generation services, and multicast as required by the eMBMS. The aim of the thesis is the search for innovative algorithms that will allow to obtain the best connectivity to offer users the resources necessary to use the 5G services in a heterogeneous scenario. Study UF that allows you to improve the search for the best candidate network and to achieve a balance that allows you to avoid congestion of the chosen networks. To achieve these two important focuses, I conducted a study on the main mathematical methods that made it possible to select the network based on QoS parameters based on the type of traffic made by users. A further goal was to improve the computational computation performance they present. Furthermore, I carried out a study in order to obtain an innovative algorithm that would allow the management of multicast. The algorithm that has been implemented responds to the needs present in the eMBMS, in realistic scenarios

Paving the road toward Smart Grids through large-scale advanced metering infrastructures

Upgrading current electricity grid to the so-called Smart Grid represents one of the major engineering challenges ever. Hence, the road toward the Smart Grid will be long and needs to be paved gradually, certainly driving the next wave of research and innovation in both the energy and the ICT (Information and Communications Technologies) sectors. Currently, the earliest stages of such a complex project are being undertaken and AMI (Advanced Metering Infrastructures) stand out as the first steps toward the Smart Grid. The Spanish R&D (Research and Development) demonstration project PRICE-GEN aims to be a flagship AMI project at both national and international level. It is focused on increasing the awareness of the status of the low voltage power distribution network through an optimal and interoperable communications architecture which provides detailed information on customers' consumption and generation. The project entails the deployment of over 200,000 smart meters in the area of Madrid, such a pilot scheme being also used as reference in other European R&D projects, such as the IGREENGrid (IntegratinG Renewables in the European Electricity Grid). This paper presents the communications architecture and technologies which are deployed in the field, analyzing how they fit some specific Smart Grid communications requirement. In addition, the paper describes in detail the pilot itself along with the services which are currently been delivered as well as with the foreseen ones. Finally, the main trends in AMI from the ICT perspective are also discussed.This work has been partly funded by the Spanish Ministry of Economy and Competitiveness through the INNPACTO Programme under the project PRICE-GEN (IPT-2011-1507-920000). The authors would like to thank the support and collaboration of all the partners of the PRICE-GEN consortium: Arteche, Centro de Investigación de Recursos y Consumos Energéticos, Current Iberia, Iberdrola Distribución, Universidad Carlos III de Madrid, Unión Fenosa Distribución, and ZIV Metering Solutions

Impact of Interdisciplinary Research on Planning, Running, and Managing Electromobility as a Smart Grid Extension

The smart grid is concerned with energy efficiency and with the environment, being a countermeasure against the territory devastations that may originate by the fossil fuel mining industry feeding the conventional power grids. This paper deals with the integration between the electromobility and the urban power distribution network in a smart grid framework, i.e., a multi-stakeholder and multi-Internet ecosystem (Internet of Information, Internet of Energy, and Internet of Things) with edge computing capabilities supported by cloud-level services and with clean mapping between the logical and physical entities involved and their stakeholders. In particular, this paper presents some of the results obtained by us in several European projects that refer to the development of a traffic and power network co-simulation tool for electro mobility planning, platforms for recharging services, and communication and service management architectures supporting interoperability and other qualities required for the implementation of the smart grid framework. For each contribution, this paper describes the inter-disciplinary characteristics of the proposed approaches

Middleware architectures for the smart grid: A survey on the state-of-the-art, taxonomy and main open issues

The integration of small-scale renewable energy sources in the smart grid depends on several challenges that must be overcome. One of them is the presence of devices with very different characteristics present in the grid or how they can interact among them in terms of interoperability and data sharing. While this issue is usually solved by implementing a middleware layer among the available pieces of equipment in order to hide any hardware heterogeneity and offer the application layer a collection of homogenous resources to access lower levels, the variety and differences among them make the definition of what is needed in each particular case challenging. This paper offers a description of the most prominent middleware architectures for the smart grid and assesses the functionalities they have, considering the performance and features expected from them in the context of this application domain