The effectiveness of loop unrolling for modulo scheduling in clustered VLIW architectures

Clustered organizations are becoming a common trend in the design of VLIW architectures. In this work we propose a novel modulo scheduling approach for such architectures. The proposed technique performs the cluster assignment and the instruction scheduling in a single pass, which is shown to be more effective than doing first the assignment and later the scheduling. We also show that loop unrolling significantly enhances the performance of the proposed scheduler especially when the communication channel among clusters is the main performance bottleneck. By selectively unrolling some loops, we can obtain the best performance with the minimum increase in code size. Performance evaluation for the SPECfp95 shows that the clustered architecture achieves about the same IPC (Instructions Per Cycle) as a unified architecture with the same resources. Moreover when the cycle time is taken into account, a 4-cluster configurations is 3.6 times faster than the unified architecture.Peer ReviewedPostprint (published version

Modulo scheduling with integrated register spilling for clustered VLIW architectures

Clustering is a technique to decentralize the design of future wide issue VLIW cores and enable them to meet the technology constraints in terms of cycle time, area and power dissipation. In a clustered design, registers and functional units are grouped in clusters so that new instructions are needed to move data between them. New aggressive instruction scheduling techniques are required to minimize the negative effect of resource clustering and delays in moving data around. In this paper we present a novel software pipelining technique that performs instruction scheduling with reduced register requirements, register allocation, register spilling and inter-cluster communication in a single step. The algorithm uses limited backtracking to reconsider previously taken decisions. This backtracking provides the algorithm with additional possibilities for obtaining high throughput schedules with low spill code requirements for clustered architectures. We show that the proposed approach outperforms previously proposed techniques and that it is very scalable independently of the number of clusters, the number of communication buses and communication latency. The paper also includes an exploration of some parameters in the design of future clustered VLIW cores.Peer ReviewedPostprint (published version

Virtual cluster scheduling through the scheduling graph

This paper presents an instruction scheduling and cluster assignment approach for clustered processors. The proposed technique makes use of a novel representation named the scheduling graph which describes all possible schedules. A powerful deduction process is applied to this graph, reducing at each step the set of possible schedules. In contrast to traditional list scheduling techniques, the proposed scheme tries to establish relations among instructions rather than assigning each instruction to a particular cycle. The main advantage is that wrong or poor schedules can be anticipated and discarded earlier. In addition, cluster assignment of instructions is performed using another novel concept called virtual clusters, which define sets of instructions that must execute in the same cluster. These clusters are managed during the deduction process to identify incompatibilities among instructions. The mapping of virtual to physical clusters is postponed until the scheduling of the instructions has finalized. The advantages this novel approach features include: (1) accurate scheduling information when assigning, and, (2) accurate information of the cluster assignment constraints imposed by scheduling decisions. We have implemented and evaluated the proposed scheme with superblocks extracted from Speclnt95 and MediaBench. The results show that this approach produces better schedules than the previous state-of-the-art. Speed-ups are up to 15%, with average speed-ups ranging from 2.5% (2-Clusters) to 9.5% (4-Clusters).Peer ReviewedPostprint (published version

Clustered VLIW architecture based on queue register files

Institute for Computing Systems ArchitectureInstruction-level parallelism (ILP) is a set of hardware and software techniques that allow parallel execution of machine operations. Superscalar architectures rely most heavily upon hardware schemes to identify parallelism among operations. Although successful in terms of performance, the hardware complexity involved might limit the scalability of this model. VLIW architectures use a different approach to exploit ILP. In this case all data dependence analyses and scheduling of operations are performed at compile time, resulting in a simpler hardware organization. This allows the inclusion of a larger number of functional units (FUs) into a single chip. IN spite of this relative simplification, the scalability of VLIW architectures can be constrained by the size and number of ports of the register file. VLIW machines often use software pipelining techniques to improve the execution of loop structures, which can increase the register pressure. Furthermore, the access time of a register file can be compromised by the number of ports, causing a negative impact on the machine cycle time. For these reasons we understand that the benefits of having parallel FUs, which have motivated the investigation of alternative machine designs. This thesis presents a scalar VLIW architecture comprising clusters of FUs and private register files. Register files organised as queue structures are used as a mechanism for inter-cluster communication, allowing the enforcement of fixed latency in the process. This scheme presents better possibilities in terms of scalability as the size of the individual register files is not determined by the total number of FUs, suggesting that the silicon area may grow only linearly with respect to the total number of FUs. However, the effectiveness of such an organization depends on the efficiency of the code partitioning strategy. We have developed an algorithm for a clustered VLIW architecture integrating both software pipelining and code partitioning in a a single procedure. Experimental results show it may allow performance levels close to an unclustered machine without communication restraints. Finally, we have developed silicon area and cycle time models to quantify the scalability of performance and cost for this class of architecture

Loop transformations for clustered VLIW architectures

With increasing demands for performance by embedded systems, especially by digital signal processing (DSP) applications, embedded processors must increase available instructionlevel parallelism (ILP) within significant constraints on power consumption and chip cost. Unfortunately, supporting a large amount of ILP on a processor while maintaining a single register file increases chip cost and potentially decreases overall performance due to increased cycle time. To address this problem, some modern embedded processors partition the register file into multiple low-ported register files, each directly connected with one or more functional units. These functional unit/register file groups are called clusters. Clustered VLIW (very long instruction word) architectures need extra copy operations or delays to transfer values among clusters. To take advantage of clustered architectures, the compiler must expose parallelism for maximal functional-unit utilization, and schedule instructions to reduce intercluster communication overhead. High-level loop transformations offer an excellent opportunity to enhance the abilities of low-level optimizers to generate code for clustered architectures. This dissertation investigates the effects of three loop transformations, i.e., loop fusion, loop unrolling, and unroll-and-jam, on clustered VLIW architectures. The objective is to achieve high performance with low communication overhead. This dissertation discusses the following techniques: Loop Fusion This research examines the impact of loop fusion on clustered architectures. A metric based upon communication costs for guiding loop fusion is developed and tested on DSP benchmarks. Unroll-and-jam and Loop Unrolling A new method that integrates a communication cost model with an integer-optimization problem is developed to determine unroll amounts for loop unrolling and unroll-and-jam automatically for a specific loop on a specific architecture. These techniques have been implemented and tested using DSP benchmarks on simulated, clustered VLIW architectures and a real clustered, embedded processor, the TI TMS320C64X. The results show that the new techniques achieve an average speedup of 1.72-1.89 on five different clustered architectures. These techniques have been implemented and tested using DSP benchmarks on simulated, clustered VLIW architectures and a real clustered, embedded processor, the TI TMS320C64X. The results show that the new techniques achieve an average speedup of 1.72-1.89 on five different clustered architectures

Compiler Techniques for Loosely-Coupled Multi-Cluster Architectures

No abstract available

A Survey on Compiler Autotuning using Machine Learning

Since the mid-1990s, researchers have been trying to use machine-learning based approaches to solve a number of different compiler optimization problems. These techniques primarily enhance the quality of the obtained results and, more importantly, make it feasible to tackle two main compiler optimization problems: optimization selection (choosing which optimizations to apply) and phase-ordering (choosing the order of applying optimizations). The compiler optimization space continues to grow due to the advancement of applications, increasing number of compiler optimizations, and new target architectures. Generic optimization passes in compilers cannot fully leverage newly introduced optimizations and, therefore, cannot keep up with the pace of increasing options. This survey summarizes and classifies the recent advances in using machine learning for the compiler optimization field, particularly on the two major problems of (1) selecting the best optimizations and (2) the phase-ordering of optimizations. The survey highlights the approaches taken so far, the obtained results, the fine-grain classification among different approaches and finally, the influential papers of the field.Comment: version 5.0 (updated on September 2018)- Preprint Version For our Accepted Journal @ ACM CSUR 2018 (42 pages) - This survey will be updated quarterly here (Send me your new published papers to be added in the subsequent version) History: Received November 2016; Revised August 2017; Revised February 2018; Accepted March 2018

SIMD based multicore processor for image and video processing

制度:新 ; 報告番号:甲3602号 ; 学位の種類:博士(工学) ; 授与年月日:2012/3/15 ; 早大学位記番号:新595