1,094 research outputs found

    Performance analysis of contention based bandwidth request mechanisms in WiMAX networks

    Get PDF
    This article is posted here with the permission of IEEE. The official version can be obtained from the DOI below - Copyright @ 2010 IEEEWiMAX networks have received wide attention as they support high data rate access and amazing ubiquitous connectivity with great quality-of-service (QoS) capabilities. In order to support QoS, bandwidth request (BW-REQ) mechanisms are suggested in the WiMAX standard for resource reservation, in which subscriber stations send BW-REQs to a base station which can grant or reject the requests according to the available radio resources. In this paper we propose a new analytical model for the performance analysis of various contention based bandwidth request mechanisms, including grouping and no-grouping schemes, as suggested in the WiMAX standard. Our analytical model covers both unsaturated and saturated traffic load conditions in both error-free and error-prone wireless channels. The accuracy of this model is verified by various simulation results. Our results show that the grouping mechanism outperforms the no-grouping mechanism when the system load is high, but it is not preferable when the system load is light. The channel noise degrades the performance of both throughput and delay.This work was supported by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/G070350/1 and by the Brunel University’s BRIEF Award

    Wireless broadband access: WiMAX and beyond - Investigation of bandwidth request mechanisms under point-to-multipoint mode of WiMAX networks

    Get PDF
    The WiMAX standard specifies a metropolitan area broadband wireless access air interface. In order to support QoS for multimedia applications, various bandwidth request and scheduling mechanisms are suggested in WiMAX, in which a subscriber station can send request messages to a base station, and the base station can grant or reject the request according to the available radio resources. This article first compares two fundamental bandwidth request mechanisms specified in the standard, random access vs. polling under the point-to-multipoint mode, a mandatory transmission mode. Our results demonstrate that random access outperforms polling when the request rate is low. However, its performance degrades significantly when the channel is congested. Adaptive switching between random access and polling according to load can improve system performance. We also investigate the impact of channel noise on the random access request mechanism

    WLC22-4: Efficient request mechanism usage in IEEE 802.16

    Get PDF
    IEEE 802.16 protocols for metropolitan broadband wireless access systems have been standardized recently. According to the standard, a subscriber station can deliver bandwidth request messages to a base station by numerous methods. This paper provides both the simulation and analytical models for the investigation of specified random access method, which is compared with centralized polling and station- grouping mechanisms. Based on the assumptions of Bernoulli request arrival process and ideal channel conditions, the mean delay of a request transmission is evaluated for varying number of transmission opportunities and different arrival rates

    Efficient Resource Management Mechanism for 802.16 Wireless Networks Based on Weighted Fair Queuing

    Get PDF
    Wireless Networking continues on its path of being one of the most commonly used means of communication. The evolution of this technology has taken place through the design of various protocols. Some common wireless protocols are the WLAN, 802.16 or WiMAX, and the emerging 802.20, which specializes in high speed vehicular networks, taking the concept from 802.16 to higher levels of performance. As with any large network, congestion becomes an important issue. Congestion gains importance as more hosts join a wireless network. In most cases, congestion is caused by the lack of an efficient mechanism to deal with exponential increases in host devices. This can effectively lead to very huge bottlenecks in the network causing slow sluggish performance, which may eventually reduce the speed of the network. With continuous advancement being the trend in this technology, the proposal of an efficient scheme for wireless resource allocation is an important solution to the problem of congestion. The primary area of focus will be the emerging standard for wireless networks, the 802.16 or “WiMAX”. This project, attempts to propose a mechanism for an effective resource management mechanism between subscriber stations and the corresponding base station

    Performance Analysis of QoS in PMP Mode WiMax Networks

    Get PDF
    IEEE 802.16 standard supports two different topologies: point to multipoint (PMP) and Mesh. In this paper, a QoS mechanism for point to multipoint of IEEE 802.16 and BS scheduler for PMP Mode is proposed. This paper also describes quality of service over WiMAX networks. Average WiMAX delay, Average WiMAX load and Average WiMAX throughput at base station is analyzed and compared by applying different scheduler at Base station and at fixed nodes

    New contention resolution schemes for WiMAX

    Get PDF
    Abstract—The use of Broadband Wireless Access (BWA) technology is increasing due to the use of Internet and multimedia applications with strict requirements of end–to–end delay and jitter, through wireless devices. The IEEE 802.16 standard, which defines the physical (PHY) and the medium access control (MAC) layers, is one of the BWA standards. Its MAC layer is centralized basis, where the Base Station (BS) is responsible for assigning the needed bandwidth for each Subscriber Station (SS), which requests bandwidth competing between all of them. The standard defines a contention resolution process to resolve the potential occurrence of collisions during the requesting process. In this paper, we propose to modify the contention resolution process to improve the network performance, including end–to–end delay and throughput

    Performance Study of Bandwidth Request Mechanisms in IEEE 802.16e Networks

    Get PDF
    WiMAX (Worldwide Interoperability for Microwave Access) is the IEEE 802.16 standards-based wireless technology that provides fixed and mobile Internet access for Metropolitan Area Networks (MAN). The IEEE 802.16 std. includes medium access control (MAC) and physical (PHY) layer pecifications and is consider to be a promising technology. Bandwidth reservation is employed to provide quality of service (QoS) to guarantee different services specified in the standard. A bandwidth request/grant scheme is defined in the IEEE 802.16 standard. There are two types of bandwidth request (BR) mechanisms, i.e., polling and contention resolution, which are defined in the standard. As specified, connections belonging to scheduling classes of extended real-time polling service, non-real-time polling service, and best effort have options to make BRs via both mechanisms, depending on the scheduling decision made by the base station (BS). This paper attempts the comparative study of BR mechanisms for different service classes defined in the standard

    Adjusting WiMAX for a Dedicated Surveillance Network

    Get PDF
    WiMAX (Worldwide Interoperability for Microwave Access) devices have been used widely in the market. WiMAX-based video surveillance products have also been available. The acceptance of WiMAX in the market, as well as the availability of WiMAX products, contributes to the possibility of implementing it for dedicated video surveillance application. However, since WiMAX is designed to accommodate various applications with different quality of service (QoS) requirements, WiMAX–based dedicated surveillance network may not achieve optimum performance, as all SSs generate the same QoS requirements. The scheduler cannot implement traffic type priority; therefore, service classification does not work as expected. This paper proposes WiMAX adjustment to transform a multi-purpose WiMAX network into a network dedicated to video surveillance. NS-2 simulations show that the proposed adjustment is able to deliver low delay and high quality video surveillance.DOI:http://dx.doi.org/10.11591/ijece.v3i4.318
    • 

    corecore