Path-Based partitioning methods for 3D Networks-on-Chip with minimal adaptive routing

© 2014 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Combining the benefits of 3D ICs and Networks-on-Chip (NoCs) schemes provides a significant performance gain in Chip Multiprocessors (CMPs) architectures. As multicast communication is commonly used in cache coherence protocols for CMPs and in various parallel applications, the performance of these systems can be significantly improved if multicast operations are supported at the hardware level. In this paper, we present several partitioning methods for the path-based multicast approach in 3D mesh-based NoCs, each with different levels of efficiency. In addition, we develop novel analytical models for unicast and multicast traffic to explore the efficiency of each approach. In order to distribute the unicast and multicast traffic more efficiently over the network, we propose the Minimal and Adaptive Routing (MAR) algorithm for the presented partitioning methods. The analytical and experimental results show that an advantageous method named Recursive Partitioning (RP) outperforms the other approaches. RP recursively partitions the network until all partitions contain a comparable number of switches and thus the multicast traffic is equally distributed among several subsets and the network latency is considerably decreased. The simulation results reveal that the RP method can achieve performance improvement across all workloads while performance can be further improved by utilizing the MAR algorithm. Nineteen percent average and 42 percent maximum latency reduction are obtained on SPLASH-2 and PARSEC benchmarks running on a 64-core CMP.Ebrahimi, M.; Daneshtalab, M.; Liljeberg, P.; Plosila, J.; Flich Cardo, J.; Tenhunen, H. (2014). Path-Based partitioning methods for 3D Networks-on-Chip with minimal adaptive routing. IEEE Transactions on Computers. 63(3):718-733. doi:10.1109/TC.2012.255S71873363

Scalability of broadcast performance in wireless network-on-chip

Networks-on-Chip (NoCs) are currently the paradigm of choice to interconnect the cores of a chip multiprocessor. However, conventional NoCs may not suffice to fulfill the on-chip communication requirements of processors with hundreds or thousands of cores. The main reason is that the performance of such networks drops as the number of cores grows, especially in the presence of multicast and broadcast traffic. This not only limits the scalability of current multiprocessor architectures, but also sets a performance wall that prevents the development of architectures that generate moderate-to-high levels of multicast. In this paper, a Wireless Network-on-Chip (WNoC) where all cores share a single broadband channel is presented. Such design is conceived to provide low latency and ordered delivery for multicast/broadcast traffic, in an attempt to complement a wireline NoC that will transport the rest of communication flows. To assess the feasibility of this approach, the network performance of WNoC is analyzed as a function of the system size and the channel capacity, and then compared to that of wireline NoCs with embedded multicast support. Based on this evaluation, preliminary results on the potential performance of the proposed hybrid scheme are provided, together with guidelines for the design of MAC protocols for WNoC.Peer ReviewedPostprint (published version

Adaptive Routing Approaches for Networked Many-Core Systems

Through advances in technology, System-on-Chip design is moving towards integrating tens to hundreds of intellectual property blocks into a single chip. In such a many-core system, on-chip communication becomes a performance bottleneck for high performance designs. Network-on-Chip (NoC) has emerged as a viable solution for the communication challenges in highly complex chips. The NoC architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication challenges such as wiring complexity, communication latency, and bandwidth. Furthermore, the combined benefits of 3D IC and NoC schemes provide the possibility of designing a high performance system in a limited chip area. The major advantages of 3D NoCs are the considerable reductions in average latency and power consumption. There are several factors degrading the performance of NoCs. In this thesis, we investigate three main performance-limiting factors: network congestion, faults, and the lack of efficient multicast support. We address these issues by the means of routing algorithms. Congestion of data packets may lead to increased network latency and power consumption. Thus, we propose three different approaches for alleviating such congestion in the network. The first approach is based on measuring the congestion information in different regions of the network, distributing the information over the network, and utilizing this information when making a routing decision. The second approach employs a learning method to dynamically find the less congested routes according to the underlying traffic. The third approach is based on a fuzzy-logic technique to perform better routing decisions when traffic information of different routes is available. Faults affect performance significantly, as then packets should take longer paths in order to be routed around the faults, which in turn increases congestion around the faulty regions. We propose four methods to tolerate faults at the link and switch level by using only the shortest paths as long as such path exists. The unique characteristic among these methods is the toleration of faults while also maintaining the performance of NoCs. To the best of our knowledge, these algorithms are the first approaches to bypassing faults prior to reaching them while avoiding unnecessary misrouting of packets. Current implementations of multicast communication result in a significant performance loss for unicast traffic. This is due to the fact that the routing rules of multicast packets limit the adaptivity of unicast packets. We present an approach in which both unicast and multicast packets can be efficiently routed within the network. While suggesting a more efficient multicast support, the proposed approach does not affect the performance of unicast routing at all. In addition, in order to reduce the overall path length of multicast packets, we present several partitioning methods along with their analytical models for latency measurement. This approach is discussed in the context of 3D mesh networks.Siirretty Doriast

High performance communication on reconfigurable clusters

High Performance Computing (HPC) has matured to where it is an essential third pillar, along with theory and experiment, in most domains of science and engineering. Communication latency is a key factor that is limiting the performance of HPC, but can be addressed by integrating communication into accelerators. This integration allows accelerators to communicate with each other without CPU interactions, and even bypassing the network stack. Field Programmable Gate Arrays (FPGAs) are the accelerators that currently best integrate communication with computation. The large number of Multi-gigabit Transceivers (MGTs) on most high-end FPGAs can provide high-bandwidth and low-latency inter-FPGA connections. Additionally, the reconfigurable FPGA fabric enables tight coupling between computation kernel and network interface. Our thesis is that an application-aware communication infrastructure for a multi-FPGA system makes substantial progress in solving the HPC communication bottleneck. This dissertation aims to provide an application-aware solution for communication infrastructure for FPGA-centric clusters. Specifically, our solution demonstrates application-awareness across multiple levels in the network stack, including low-level link protocols, router microarchitectures, routing algorithms, and applications. We start by investigating the low-level link protocol and the impact of its latency variance on performance. Our results demonstrate that, although some link jitter is always present, we can still assume near-synchronous communication on an FPGA-cluster. This provides the necessary condition for statically-scheduled routing. We then propose two novel router microarchitectures for two different kinds of workloads: a wormhole Virtual Channel (VC)-based router for workloads with dynamic communication, and a statically-scheduled Virtual Output Queueing (VOQ)-based router for workloads with static communication. For the first (VC-based) router, we propose a framework that generates application-aware router configurations. Our results show that, by adding application-awareness into router configuration, the network performance of FPGA clusters can be substantially improved. For the second (VOQ-based) router, we propose a novel offline collective routing algorithm. This shows a significant advantage over a state-of-the-art collective routing algorithm. We apply our communication infrastructure to a critical strong-scaling HPC kernel, the 3D FFT. The experimental results demonstrate that the performance of our design is faster than that on CPUs and GPUs by at least one order of magnitude (achieving strong scaling for the target applications). Surprisingly, the FPGA cluster performance is similar to that of an ASIC-cluster. We also implement the 3D FFT on another multi-FPGA platform: the Microsoft Catapult II cloud. Its performance is also comparable or superior to CPU and GPU HPC clusters. The second application we investigate is Molecular Dynamics Simulation (MD). We model MD on both FPGA clouds and clusters. We find that combining processing and general communication in the same device leads to extremely promising performance and the prospect of MD simulations well into the us/day range with a commodity cloud

On Multicast in Asynchronous Networks-on-Chip: Techniques, Architectures, and FPGA Implementation

In this era of exascale computing, conventional synchronous design techniques are facing unprecedented challenges. The consumer electronics market is replete with many-core systems in the range of 16 cores to thousands of cores on chip, integrating multi-billion transistors. However, with this ever increasing complexity, the traditional design approaches are facing key issues such as increasing chip power, process variability, aging, thermal problems, and scalability. An alternative paradigm that has gained significant interest in the last decade is asynchronous design. Asynchronous designs have several potential advantages: they are naturally energy proportional, burning power only when active, do not require complex clock distribution, are robust to different forms of variability, and provide ease of composability for heterogeneous platforms. Networks-on-chip (NoCs) is an interconnect paradigm that has been introduced to deal with the ever-increasing system complexity. NoCs provide a distributed, scalable, and efficient interconnect solution for today’s many-core systems. Moreover, NoCs are a natural match with asynchronous design techniques, as they separate communication infrastructure and timing from the computational elements. To this end, globally-asynchronous locally-synchronous (GALS) systems that interconnect multiple processing cores, operating at different clock speeds, using an asynchronous NoC, have gained significant interest. While asynchronous NoCs have several advantages, they also face a key challenge of supporting new types of traffic patterns. Once such pattern is multicast communication, where a source sends packets to arbitrary number of destinations. Multicast is not only common in parallel computing, such as for cache coherency, but also for emerging areas such as neuromorphic computing. This important capability has been largely missing from asynchronous NoCs. This thesis introduces several efficient multicast solutions for these interconnects. In particular, techniques, and network architectures are introduced to support high-performance and low-power multicast. Two leading network topologies are the focus: a variant mesh-of-trees (MoT) and a 2D mesh. In addition, for a more realistic implementation and analysis, as well as significantly advancing the field of asynchronous NoCs, this thesis also targets synthesis of these NoCs on commercial FPGAs. While there has been significant advances in FPGA technologies, there has been only limited research on implementing asynchronous NoCs on FPGAs. To this end, a systematic computeraided design (CAD) methodology has been introduced to efficiently and safely map asynchronous NoCs on FPGAs. Overall, this thesis makes the following three contributions. The first contribution is a multicast solution for a variant MoT network topology. This topology consists of simple low-radix switches, and has been used in high-performance computing platforms. A novel local speculation technique is introduced, where a subset of the network’s switches are speculative that always broadcast every packet. These switches are very simple and have high performance. Speculative switches are surrounded by non-speculative ones that route packets based on their destinations and also throttle any redundant copies created by the former. This hybrid network architecture achieved significant performance and power benefits over other multicast approaches. The second contribution is a multicast solution for a 2D-mesh topology, which is more complex with higher-radix switches and also is more commonly used. A novel continuous-time replication strategy is introduced to optimize the critical multi-way forking operation of a multicast transmission. In this technique, a multicast packet is first stored in an input port of a switch, from where it is sent through distinct output ports towards different destinations concurrently, at each output’s own rate and in continuous time. This strategy is shown to have significant latency and energy benefits over an approach that performs multicast using multiple distinct serial unicasts to each destination. Finally, a systematic CAD methodology is introduced to synthesize asynchronous NoCs on commercial FPGAs. A two-fold goal is targeted: correctness and high performance. For ease of implementation, only existing FPGA synthesis tools are used. Moreover, since asynchronous NoCs involve special asynchronous components, a comprehensive guide is introduced to map these elements correctly and efficiently. Two asynchronous NoC switches are synthesized using the proposed approach on a leading Xilinx FPGA in 28 nm: one that only handles unicast, and the other that also supports multicast. Both showed significant energy benefits with some performance gains over a state-of-the-art synchronous switch

Routing and Wavelength Assignment for Multicast Communication in Optical Network-on-Chip

An Optical Network-on-Chip (ONoC) is an emerging chip-level optical interconnection technology to realise high-performance and power-efficient inter-core communication for many-core processors. Within the field, multicast communication is one of the most important inter-core communication forms. It is not only widely used in parallel computing applications in Chip Multi-Processors (CMPs), but also common in emerging areas such as neuromorphic computing. While many studies have been conducted on designing ONoC architectures and routing schemes to support multicast communication, most existing solutions adopt the methods that were initially proposed for electrical interconnects. These solutions can neither fully take advantage of optical communication nor address the special requirements of an ONoC. Moreover, most of them focus only on the optimisation of one multicast, which limits the practical applications because real systems often have to handle multiple multicasts requested from various applications. Hence, this thesis will address the design of a high-performance communication scheme for multiple multicasts by taking into account the unique characteristics and constraints of an ONoC. This thesis studies the problem from a network-level perspective. The design methodology is to optimally route all multicasts requested simultaneously from the applications in an ONoC, with the objective of efficiently utilising available wavelengths. The novelty is to adopt multicast-splitting strategies, where a multicast can be split into several sub-multicasts according to the distribution of multicast nodes, in order to reduce the conflicts of different multicasts. As routing and wavelength assignment problem is an NP-hard problem, heuristic approaches that use the multicast-splitting strategy are proposed in this thesis. Specifically, three routing and wavelength assignment schemes for multiple multicasts in an ONoC are proposed for different problem domains. Firstly, PRWAMM, a Path-based Routing and Wavelength Assignment for Multiple Multicasts in an ONoC, is proposed. Due to the low manufacture complexity requirement of an ONoC, e.g., no splitters, path-based routing is studied in PRWAMM. Two wavelength-assignment strategies for multiple multicasts under path-based routing are proposed. One is an intramulticast wavelength assignment, which assigns wavelength(s) for one multicast. The other is an inter-multicast wavelength assignment, which assigns wavelength(s) for different multicasts, according to the distributions of multicasts. Simulation results show that PRWAMM can reduce the average number of wavelengths by 15% compared to other path-based schemes. Secondly, RWADMM, a Routing and Wavelength Assignment scheme for Distribution-based Multiple Multicasts in a 2D ONoC, is proposed. Because path-based routing lacks flexibility, it cannot reduce the link conflicts effectively. Hence, RWADMM is designed, based on the distribution of different multicasts, which includes two algorithms. One is an optimal routing and wavelength assignment algorithm for special distributions of multicast nodes. The other is a heuristic routing and wavelength assignment algorithm for random distributions of multicast nodes. Simulation results show that RWADMM can reduce the number of wavelengths by 21.85% on average, compared to the state-of-the-art solutions in a 2D ONoC. Thirdly, CRRWAMM, a Cluster-based Routing and Reusable Wavelength Assignment scheme for Multiple Multicasts in a 3D ONoC, is proposed. Because of the different architectures with a 2D ONoC (e.g., the layout of nodes, optical routers), the methods designed for a 2D ONoC cannot be simply extended to a 3D ONoC. In CRRWAMM, the distribution of multicast nodes in a mesh-based 3D ONoC is analysed first. Then, routing theorems for special instances are derived. Based on the theorems, a general routing scheme, which includes a cluster-based routing method and a reusable wavelength assignment method, is proposed. Simulation results show that CRRWAMM can reduce the number of wavelengths by 33.2% on average, compared to other schemes in a 3D ONoC. Overall, the three routing and wavelength assignment schemes can achieve high-performance multicast communication for multiple multicasts of their problem domains in an ONoC. They all have the advantages of a low routing complexity, a low wavelength requirement, and good scalability, compared to their counterparts, respectively. These methods make an ONoC a flexible high-performance computing platform to execute various parallel applications with different multicast requirements. As future work, I will investigate the power consumption of various routing schemes for multicasts. Using a multicast-splitting strategy may increase power consumption since it needs different wavelengths to send packets to different destinations for one multicast, though the reduction of wavelengths used in the schemes can also potentially decrease overall power consumption. Therefore, how to achieve the best trade-off between the total number of wavelengths used and the number of sub-multicasts in order to reduce power consumption will be interesting future research

High-Performance and Wavelength-Reused Optical Network on Chip (ONoC) Architectures and Communication Schemes for Manycore Processor

Optical Network on Chip (ONoC) is an emerging chip-scale optical interconnection technology to realize the high-performance and power-efficient inter-core communication for many-core processors. By utilizing the silicon photonic interconnects to transmit data packets with optical signals, it can achieve ultra low communication delay, high bandwidth capacity, and low power dissipation. With the benefits of Wavelength Division Multiplexing (WDM), multiple optical signals can simultaneously be transmitted in the same optical interconnect through different wavelengths. Thus, the WDM-based ONoC is becoming a hot research topic recently. However, the maximal number of available wavelengths is restricted for the reliable and power-efficient optical communication in ONoC. Hence, with a limited number of wavelengths, the design of high-performance and power-efficient ONoC architecture is an important and challenging problem. In this thesis, the design methodology of wavelength-reused ONoC architecture is explored. With the wavelength reuse scheme in optical routing paths, high-performance and power-efficient communication is realized for many-core processors only using a small number of available wavelengths. Three wavelength-reused ONoC architectures and communication schemes are proposed to fulfil different communication requirements, i.e., network scalability, multicast communication, and dark silicon. Firstly, WRH-ONoC, a wavelength-reused hierarchical Optical Network on Chip architecture, is proposed to achieve high network scalability, namely obtaining low communication delay and high throughput capacity for hundreds of thousands of cores by reusing the limited number of available wavelengths with the modest hardware cost and energy overhead. WRH-ONoC combines the advantages of non-blocking communication in each lambda-router and wavelength reuse in all lambda-routers through the hierarchical networking. Both theoretical analysis and simulation results indicate that WRH-ONoC can achieve prominent improvement on the communication performance and scalability (e.g., 46.0% of reduction on the zero-load packet delay and 72.7% of improvement on the network throughput for 400 cores with small hardware cost and energy overhead) in comparison with existing schemes. Secondly, DWRMR, a dynamical wavelength-reused multicast scheme based on the optical multicast ring, is proposed for widely existing multicast communications in many-core processors. In DWRMR, an optical multicast ring is dynamically constructed for each multicast group and the multicast packets are transmitted in a single-send-multi-receive manner requiring only one wavelength. All the cores in the same multicast group can reuse the established multicast ring through an optical token arbitration scheme for the interactive multicast communications, thereby avoiding the frequent construction of multicast routing paths dedicatedly for each core. Simulation results indicate that DWRMR can reduce more than 50% of end-to-end packet delay with slight hardware cost, or require only half number of wavelengths to achieve the same performance compared with existing schemes. Thirdly, Dark-ONoC, a dynamically configurable ONoC architecture, is proposed for the many-core processor with dark silicon. Dark silicon is an inevitable phenomenon that only a small number of cores can be activated simultaneously while the other cores must stay in dark state (power-gated) due to the restricted power budget. Dark-ONoC periodically allocates non-blocking optical routing paths only between the active cores with as less wavelengths as possible. Thus, it can obtain high-performance communication and low power consumption at the same time. Extensive simulations are conducted with the dark silicon patterns from both synthetic distribution and real data traces. The simulation results indicate that the number of wavelengths is reduced by around 15% and the overall power consumption is reduced by 23.4% compared to existing schemes. Finally, this thesis concludes several important principles on the design of wavelength-reused ONoC architecture, and summarizes some perspective issues for the future research