Signal Processing in Arrayed MIMO Systems

Multiple-Input Multiple-Output (MIMO) systems, using antenna arrays at both receiver and transmitter, have shown great potential to provide high bandwidth utilization efficiency. Unlike other reported research on MIMO systems which often assumes independent antennas, in this thesis an arrayed MIMO system framework is proposed, which provides a richer description of the channel charac- teristics and additional degrees of freedom in designing communication systems. Firstly, the spatial correlated MIMO system is studied as an array-to-array system with each array (Tx or Rx) having predefined constrained aperture. The MIMO system is completely characterized by its transmit and receive array man- ifolds and a new spatial correlation model other than Kronecker-based model is proposed. As this model is based on array manifolds, it enables the study of the effect of array geometry on the capacity of correlated MIMO channels. Secondly, to generalize the proposed arrayed MIMO model to a frequency selective fading scenario, the framework of uplink MIMO DS-CDMA (Direct- Sequence Code Division Multiple Access) systems is developed. DOD estimation is developed based on transmit beamrotation. A subspace-based joint DOA/TOA estimation scheme as well as various spatial temporal reception algorithms is also proposed. Finally, the downlink MIMO-CDMA systems in multiple-access multipath fading channels are investigated. Linear precoder and decoder optimization problems are studied under different criterions. Optimization approaches with different power allocation schemes are investigated. Sub-optimization approaches with close-form solution and thus less computation complexity are also proposed

Space time transceiver design over multipath fading channels

Imperial Users onl

UTHM water quality classification based on sub index

River or stream at their source is unpolluted, but as water flow downstream, the river or lake is receiving point and non-point pollutant source. Ammoniacal nitrogen (NH3- N) and suspended solids (SS) strongly influences the dynamics of the dissolved oxygen in the water. Studies on monitoring this parameter were conducted for a river or lake but limited to the small man-made lake. This study is initiate to determine the changes in water quality of UTHM watershed as the water flows from upstream to downstream. The monitoring of NH3-N and TSS were monitored at two sampling schemes, 1) at the two-week interval and, 2) at a daily basis followed by the determination of the water quality sub-index particularly SIAN and SISS. The results showed that the two lakes in UTHM watershed were classified as polluted. In conclusion, the remedial action should be implemented to improve the water quality to meet the requirements at least to meet the recreational purpose

Antenna array calibration in wireless communications

Imperial Users onl

Spatiotemporal-MIMO channel estimator and beamformer for 5G

With requirements of spiraling data rates and limited spectrum availability, there is an increased interest in mm-wave beamformer-based communications for 5G. For upcoming cellular networks, the critical point is to exploit the increased number of employable antennas at both Tx and Rx to: 1) combat increased path loss; 2) tackle higher interference due to higher user density; and 3) handle multipath effects in frequency selective channels. Toward this, a multi-beam spatiotemporal superresolution beamforming framework is proposed in this paper as a promising candidate to design beampatterns that mitigate/suppress co-channel interference and deliver massive gain in the desired directions. Initially, channel and signal models suitable for the mm-wave MIMO system are presented using the manifold vectors of both Tx and Rx antenna arrays. Based on these models, a novel subspace-based channel estimator is employed, which estimates delays, directions, velocities, and fading coefficients of the desired signal paths. This information is then exploited by the proposed spatiotemporal beamformer to provide a massive array gain that combats path loss without increasing the number of antenna array elements and to be tolerant to the near-far problem in a high interference environment. The performance of the proposed channel estimator and beamformer is examined using computer simulation studies

Study the Effect of Co-Channel Interference in STC MIMO-OFDM System and Mitigation of CCI using Beamforming Technique

In this modern age of high speed wireless data communication, Multiple input multiple output orthogonal frequency division multiplexing (MIMO-OFDM) schemes have recently drawn wide interests due to their capability of high data rate transmission over multipath fading channels. This thesis work introduces the study of multi- user and multi-antenna MIMO-OFDM systems. In this work, the performances of two main classes of MIMO-OFM system i.e. multi-user and multi-antenna MIMO-ODM techniques have been studied. The transmitted data is sent using BPSK, QPSK modulation techniques. The performance of the system in Rayleigh and AWGN channel is studied. Space time coding technique also used in transmitting side of the multi-antenna MIMO system.Study and analysis of the effect of co-channel interference over wireless communication system is considered the main objective of this project work .Beamforming technique is one of the best techniques to mitigate co-channel interference. There are several beamforming techniques like LMS, RLS style beamforming techniques. LMS style adaptive beamforming technique is applied to the system. The performance of the LMS style beamforming technique for mitigation of co-channel interference has been analyzed for different modulation techniques.The performance comparison between the adaptive beamforming and null steering beamforming techniques is carried out for the space time coded MIMO-OFDM system. From the performance analysis, it is observed that to mitigate the co-channel interference in ST coded MIMO-OFDM system, adaptive beamforming technique outperforms the method based on the null steering beamforming

Space-time processing for wireless mobile communications

Intersymbol interference (ISI) and co-channel interference (CCI) are two major obstacles to high speed data transmission in wireless cellular communications systems. Unlike thermal noise, their effects cannot be removed by increasing the signal power and are time-varying due to the relative motion between the transmitters and receivers. Space-time processing offers a signal processing framework to optimally integrate the spatial and temporal properties of the signal for maximal signal reception and at the same time, mitigate the ISI and CCI impairments. In this thesis, we focus on the development of this emerging technology to combat the undesirable effects of ISI and CCL We first develop a convenient mathematical model to parameterize the space-time multipath channel based on signal path power, directions and times of arrival. Starting from the continuous time-domain, we derive compact expressions of the vector space-time channel model that lead to the notion of block space-time manifold, Under certain identifiability conditions, the noiseless vector-channel outputs will lie on a subspace constructed from a set. of basis belonging to the block space-time manifold. This is an important observation as many high resolution array processing algorithms Can be applied directly to estimate the multi path channel parameters. Next we focus on the development of semi-blind channel identification and equalization algorithms for fast time-varying multi path channels. Specifically. we develop space-time processing algorithms for wireless TDMA networks that use short burst data formats with extremely short training data. sequences. Due to the latter, the estimated channel parameters are extremely unreliable for equalization with conventional adaptive methods. We approach the channel acquisition, tracking and equalization problems jointly, and exploit the richness of the inherent structural relationship between the channel parameters and the data sequence by repeated use of available data through a forward- backward optimization procedure. This enables the fuller exploitation of the available data. Our simulation studies show that significant performance gains are achieved over conventional methods. In the final part of this thesis, we address the problem identifying and equalizing multi path communication channels in the presence of strong CCl. By considering CCI as stochasic processes, we find that temporal diversity can be gained by observing the channel outputs from a tapped delay line. Together with the assertion that the finite alphabet property of the information sequences can offer additional information about the channel parameters and the noise-plus-covariance matrix, we develop a spatial temporal algorithm, iterative reweighting alternating minimization, to estimate the channel parameters and information sequence in a weighted least squares framework. The proposed algorithm is robust as it does not require knowledge of the number of CCI nor their structural information. Simulation studies demonstrate its efficacy over many reported methods

Seventy Years of Radar and Communications: The road from separation to integration

Radar and communications (R&C) as key utilities of electromagnetic (EM) waves have fundamentally shaped human society and triggered the modern information age. Although R&C had been historically progressing separately, in recent decades, they have been converging toward integration, forming integrated sensing and communication (ISAC) systems, giving rise to new highly desirable capabilities in next-generation wireless networks and future radars. To better understand the essence of ISAC, this article provides a systematic overview of the historical development of R&C from a signal processing (SP) perspective. We first interpret the duality between R&C as signals and systems, followed by an introduction of their fundamental principles. We then elaborate on the two main trends in their technological evolution, namely, the increase of frequencies and bandwidths and the expansion of antenna arrays. We then show how the intertwined narratives of R&C evolved into ISAC and discuss the resultant SP framework. Finally, we overview future research directions in this field